796949

Oregon Scientific WR601 Manual

14
Zoom out
Zoom in
Previous page
1/24
Next page
NE
12
6. When finished, press COUNTY to advance to the
next county-code field, or wait 9 seconds to
automatically return to Clock Display Mode.
RADIO VOLUME
Before you can set the volume, the radio needs to be
in NOAA on mode.
To set the radio volume:
In Clock Display Mode, with the radio set to NOAA
on, press or to adjust the volume. (Maximum
volume is 7, no sound is 1.)
RECEPTION TEST
REMEMBER For your system to be effective, you must
To receive all warnings or only warnings from
specified localities:
1. Press COUNTY to enter the county-code display
from any Clock Display Mode.
2. Press or to switch between receiving all (ALL)
warnings or only warnings from specified local
areas [----].
NOTE If (1-6) [----] (specified local area) is selected,
local county codes need to be programmed into the
unit.
To enter the appropriate county code:
1. Press COUNTY to enter the county-code display
from Clock Display Mode.
2. Press COUNTY to bypass the county-code field 0
and advance to county code field 1.
3. To enter the county-code in this field, press and hold
COUNTY for 2 seconds. The extreme left county-
code digit will flash.
4. To enter the first county-code digit, press or .
Remember: This part of the code subdivides a county
into localized sub-sections. If the county code has not
been subdivided into smaller sub-sections, select (0) in
the far left column.
5. Enter the remaining 5 digits by following the same
process. Press COUNTY followed by or .
The fact that you can get clear voice reception does
not guarantee that an emergency alert will trigger your
unit's alert tone. To test actual reception, your unit must
receive a test or emergency alert signal broadcast. The
National Weather Service (NWS) or Weatheradio
Canada broadcast a test alert every week on Wednesday
between 11AM and 12PM (noon). To find out the specific
test schedule in your area, contact your local Nation
Weather Service or Weatheradio Canada office. These
offices are usually listed online or in the telephone book.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WR601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WR601 in the language / languages: English as an attachment in your email.

The manual is 5.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info