796948

Oregon Scientific WR203 Manual

7
Zoom out
Zoom in
Previous page
1/60
Next page
EN
7
Examples of which radio to choose for a particular
location is given in the far right column in above chart.
CHANNEL CORRESPONDING
RADIO FREQUENCY
1 162.400 MHz
2 162.425 MHz
3 162.450 MHz
4 162.475 MHz
5 162.500 MHz
6 162.525 MHz
7 162.550 MHz
SETTING THE LOCATION / SAME CODE
This unit can store up to 9 locations (1-9).
NOTE If you do not set a location, the radio will use
the default setting “CO:All” for all counties.
NOTE If you select “CO:All” (step 3 below) you will
receive all warnings within the unit’s reception range.
This may result in giving you information for regions that
are not relevant. The regions can be as large as 5,000
square miles (13 sq km). If you select “CO:--“ you will
disable the ALL option and will only receive warnings
from specified local areas.
1. Press and hold to enter setting mode.
2. Press to navigate to Set Location.
3. Press to enter.
4. “CO:ALL” or “CO:--“ will be displayed. Press ,
characters on the right will flash. Press to
select “ALL” (receive all warnings) or “---“ (disable
the ALL option), press to confirm selection.
Continue setting the other storage locations:
5. Digit next to C will flash. Press to select
where you want to store the location, e.g., C1. Press
to confirm. The 6 digits will flash.
6. Press , NAME / FIPS will flash. (Select either
option a or b below)
a. To program by State / County name:
i. Press to enter setting options.
ii. Press to navigate to state and press
to confirm. Repeat for county
iii. Press to navigate to next storage location
(e.g., C2) and press to confirm. Repeat
steps i-iii.
b. To program by SAME code from the NWS:
i. Press to navigate to FIPS and press
to enter setting options.
ii. Press repeatedly to select number
and press to confirm and move to the next
digit.
iii. Repeat step ii for all digits.
iv. After all digits have been confirmed, storage
location (e.g., C1) will flash. Press to
navigate to next storage location and press
to confirm. Repeat steps ii - iv.
WR203_M_EN.indd 7 8/28/12 14:51:21
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WR203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WR203 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info