587084
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
EN
ICON DESCRIPTION
Clo
ud
y
Ra
iny
Snowy
TEMPERATURE AND HUMIDITY
The weather station displays indoor and outdoor
readings for:
1. Current, minimum and maximum temperatures and
relative humidity.
2. Comfort level indicator and trend line.
3. Heat index, wind chill and dew point level.
The weather station can connect up to 10 remote
sensors.
NOTE
Channel 1 is dedicated for outdoor temperature
and humidity in the wind sensor.
shows which remote sensor’s data you are viewing.
appears when indoor data is displayed.
The tim
estamp records the date and time when storing
the temperature and humidity readings in memory.
To selec
t the temperature measurement unit:
Press
UNIT
(at the bottom of the base station) to select
°C / °F
.
NOTE
The unit of all temperature related displays will
be changed simultaneously.
To view readings from indoor / outdoor sensors
(1-10) for temperature and humidity:
1. Press
SELECT
to navigate select the Temperature
or Humidity Area.
will show next to the Area.
2. Rotate the dial left or right to select the channel.
To view minimum and maximum temperature or
humidity:
1. In the Temperature or Humidity Area, press
MODE
repeatedly to cycle through the readings for:
Current Temperature
Heat Index
Wind Chill
Dew Point
Humidity
2.
Fo
r
e
r er
ach of the above readings, press
MEMORY /
ON/OFF
repeatedly to toggle respectively
between:
Current / MAX / MIN temperature
Current / MAX heat index
Current / MIN wind chill
Current / MAX / MIN dew point
Current / MAX / MIN humidity
The timestamp is displayed accordingly in the Clock
Area.
To clear the memories and timestamp for the
temperature, heat index, wind chill, humidity and
dew point readings:
In the Temperature or Humidity Area, press and hold
MEMORY /
In the Temperature or Humidity Area, press and hold
ON/OFF
to clear the readings.
To change the high / low temperature, heat index,
wind chill, humidity and dew point alarms:
1. In the Temperature or Humidity Area, press
ALARM
repeatedly to toggle between high / low
alarms for temperature, heat index, wind chill,
humidity and dew point readings.
2. Press and hold
ALARM
to enter the alarm setting.
3. Rotate the dial left or right to set the desired values.
4. Press
ALARM
to confi rm the setting.
To activate / deactivate the high / low temperature,
heat index, wind chill, humidity and dew point
alarms:
1. In the Temperature or Humidity Area, press
ALARM
repeatedly to select the desired alarm.
2. Press
MEMORY /
ON/OFF
to activate or
deactivate the alarm.
NOTE
The dew point advises at what temperature
condensation will form. The wind chill factor is based on
the combined effects of temperature and wind speed.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the temperature and
humidity readings. The trend is shown as follows:
TREND ICON DESCRIPTION
Ri
sing
St
e
ady
F
al
ling
COMFORT LEVEL
The Comfort Zone icon indicates how comfortable the
climate is based on current temperature and humidity
measurements:
ICON DESCRIPTION
Co
mfortable
Neut
r
al
Unco
mfortable
WMR100_EN_86L4515-017.indd 9 6/15/06 4:26:22 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WMR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WMR100 in the language / languages: English as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific WMR100

Oregon Scientific WMR100 User Manual - German - 15 pages

Oregon Scientific WMR100 User Manual - Dutch - 14 pages

Oregon Scientific WMR100 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info