796735
10
Zoom out
Zoom in
Previous page
1/11
Next page
SPECIFICATIONS
TYPE DESCRIPTION
MAIN UNIT
L x W x H 280mm x 95mm x 255mm
Weight 1000g
Power DC10V 3.5A
OPERATION TEMPERATURE
Temperature range (operation) 10 °C to 40 °C
Temperature range (storage) -20 °C a 60°C
POWER
Input 100-240V 50-60HZ
Output DC10V 3.5A
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientic.com) to learn more about Oregon Scientic products. If you’re in the US and would like to
contact our Customer Care department directly, please visit: https://us.oregonscientic.com/service/support.asp OR Call 1-800-
853-8883.
For international inquiries, please visit: www.oregonscientic.com <http://www.oregonscientic.com>
Oregon Scientic Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this
user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency
between the English version and any other language versions, the English version shall prevail.
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientic, declares that illumi Ambient Wakeup Light (model: WL201) is in compliance with the essential
requirements and other relevant provisions of Directive 2004/108/EC. A copy of the signed and dated Declaration of Conformity is
available on request via our Oregon Scientic Customer Service.
This Class B digital apparatus complies with Canadian ICES-003.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference received, including interference that may cause
undesired operation.
WARNING Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WL201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WL201 in the language / languages: English as an attachment in your email.

The manual is 4.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info