587082
34
Zoom out
Zoom in
Previous page
1/36
Next page
34
* You may need to change the dial type setting to Pulse dialing if your local tele-
phone exchange does not support Tone dialing.
“My call was cut off when I went out of range of the base unit. Now I cannot use
my handset.”
* Please move the handset closer to the base unit.
“I hear a tone while I am using my handset, and the battery symbol on the display
is “empty”.”
* The battery needs to be recharged. Put the handset into the charger; it will take
up to 15 hours to be fully charged.
“I’ve tried recharging the batteries, but I still get a warning that it is not
charged.”
* The batteries probably need to be replaced.
“The handset does not ring when a call comes in.”
* Check that the total REN value of all equipment connected to your telephone line
is on more than 4. Disconnect one or more telephones and see whether that
helps.
* Check that you have not set the ringing volumes to “off” (see section Tones and
Volumes).
“The Caller Display function is not working”
* Please check if you have subscribed to the Caller Display service with your
network provider.
“The Caller Display function is working but the Caller’s Name from the
phonebook is not displayed even if the same telephone number calls in”
* You need to store the full telephone number including the STD code into your
phonebook memory.
“I have tried several times to press the phone button but the busy tone is
heard and the green LED on the base is not on”
* Unplug the power adapter at the bottom of the base unit. Then reconnect the
power adapter. Press and hold [PAGE] on the base until [IN USE] (green LED) is
flashing.
* Repeat steps 1 - 9 at 1.4 Registering new handset
“A short beep tone is heard accompanied by “Base” flashing in the handset
display”
Due to radio interference in the environment, occasional loss of synchronisation
between the handset and base may have occurred for a very short period. The base
will quickly change to another channel automatically to overcome the interference
and restore the synchronization. You can also move the handset near the base
station to reduce the interference. If you don’t want to hear the beep tone, you can
change the handset menu settings to turn off the OUT OF RANGE tone.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WD338HSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WD338HSC in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific WD338HSC

Oregon Scientific WD338HSC Quick start guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info