301031
36
Zoom out
Zoom in
Previous page
1/46
Next page
36
4.5 Indoor temperature sensor in the base unit
The indoor temperature shows on the third line of the LCD display. icon on the
left, represents the temperature on the built-in sensor, and also shows the local
humidity reading on the right of the
icon .
4.6 Remote temperature and humidity alarm setting
The remote temperature and humidity alarms are only linked to the remote sensor on
Channel 1. There is no alarm option available on Channel 2, 3 or built-in sensors.
Temperature and humidity alarm setting
1. Press [ HI/LO ] at the back of main unit (please refer to section 1.5 Installation
- Connecting the base unit) to enter the remote temperature and humidity alarm
setting mode.
2. The sequence of pressing [ HI/LO ] key for alarm setting is: High Temperature
Alarm, High Humidity Alarm, Low Temperature Alarm and Low Humidity Alarm
as follows
3. Press [
] at the back of the main unit to increment the setting values by 1
C
or 1.8
F and 1 % of humidity, or press and hold [
] at the back of the unit for
speed setting values by 5
C and 5% of the humidity.
4. The alarm will be enabled after setting the values of each item.
5. Pressing [ ON/OFF ALARM ] key at the back of the main unit to toggle between
enable/disable for each item.
6. During the temperature and humidity alarm, sound is emitted. Press the
[ CHANNEL ] to stop the alarm .
To remove the temperature and humidity alarm setting
1. Press [ HI/LO ] to select the value you want to remove
2. Press [ ON/OFF ALARM ] to remove the information
3. Press [ CHANNEL ] to confirm and return to standby mode
The remote temperature and humidity alarm will be emitted when the values of the
remote sensor in channel 1 received are out of range. The value will flash with “HI”
or
“LO” to indicate which alarm setting has been reached and beeping tone will last for
1 minute.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific wd 338 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific wd 338 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific wd 338

Oregon Scientific wd 338 Quick start guide - English - 1 pages

Oregon Scientific wd 338 User Manual - German - 46 pages

Oregon Scientific wd 338 User Manual - Dutch - 46 pages

Oregon Scientific wd 338 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info