796603

Oregon Scientific WA638 Manual

6
Zoom out
Zoom in
Previous page
1/50
Next page
3
LCD DISPLAY SCREEN
12 34
5
6
7
8
1. the unit is in volume setting mode
2. the soothing sound is on / the unit is in soothing
sound setting mode
3. Mood light is on / the unit is in mood-light setting mode
4. Diffuser is on / the unit is in diffuser setting mode
5. Alarm is set to on / the unit is in alarm setting mode
6. Sleep timer is on / the unit is in sleep timer setting mode
7. Time display
8. Diffuser low battery display (CR2032)
GETTING STARTED
INSERT CR2032 BATTERY
This unit is equipped with a CR2032 battery as a backup
power source.
1. Open the battery compartment cover by turning it in
anticlockwise using a coin.
2. Insert a CR2032 battery into the compartment,
matching the polarity.
3. Close the battery compartment cover by turning it in
clockwise using a coin.
ADD WATER
NOTE Do not plug the unit to the power outlet before
adding water.
1. Remove the water tank cover, pour tap water in room
temperature into the water tank. Do not exceed the MAX
mark.
2. Add few drops of essential oils into the water.
3. Place the cover back in place.
4. Plug the power adapter to the power outlet. Make sure
the adaptor is not obstructed and is easily accessible
to the unit.
5. Press to turn the unit on.
When the water almost runs out (around 50ml remains in
the unit), the diffusing function will stop automatically and
will keep blinking until the unit is turned off.
NOTE
• Do not use distilled water with this product.
• Temperature of water should be around 15 – 40 °C.
• 100% nature essential oil should be used.
• Switch off the unit and unplug from the mains before
moving or cleaning the unit.
• When the water lls up to the MAX marking, the unit
diffuses mist up to 8 hours approximately if the sleep
timer is set to OFF.
CLOCK
SET THE CLOCK
Set the clock when the unit is turned on for the rst time.
1. Press to set the 12/24-hour format, hour or minute.
Press and hold to speed up the selection.
2. Press to conrm.
DIFFUSER
SET THE DIFFUSER
1. Press once to display the current setting. The screen
displays .
NOTE The screen returns to idle if no keys are pressed
after 2 seconds.
2. Press again to toggle different diffusing modes –
1 (Low), 2 (High) or OFF.
MOOD LIGHT
SET MOOD LIGHT
1. Press once to display the current setting. The screen
displays .
2. Press again to toggle different mood light setting
(1/2/3/4/5/6/LOOP/OFF).
SOOTHING SOUND
SET SOUND
1. Press once to display the current setting. The screen
displays .
The screen returns to idle if no keys are pressed
after 2 seconds.
2. Press again to toggle different sound (1/2/3/4/5/6/OFF).
EN
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WA638 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WA638 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 6.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info