796600

Oregon Scientific WA328 Manual

4
Zoom out
Zoom in
Previous page
1/66
Next page
EN
0403
SETTINGS
You can customize your required settings prior to the start of the unit diffusing.
MANUALLY SET CLOCK
To set the clock on the main unit:
1. After the power adapter is plugged in, lift the top of the main unit. Press at the
rear of the main unit, the main unit automatically enters to clock setting mode.
2. The setting sequence is 12/24 hr format, hour and minute.
3. Press to change the settings slowly, or press and hold to rapidly
change the settings.
4. Press to conrm setting.
ROOM SIZE
You can adjust the strength of the aroma according to the size of the room where the device is located. The time
interval between each spray depends on the size of the room. It usually takes approx. 5-minutes per spraying cycle.
1. Press to enter setting mode.
2. Slide ft2/m2 switch to select a measurement unit.
3. Press to adjust the room size; the setting sequence is 10m2, 20m2, 30m2, 40m2 and 50m2
(~100ft2, 200ft2, 300ft2, 400ft2 and 500ft2).
4. The setting will automatically be saved.
SPRAY THE AROMA MANUALLY
You can select a desired nozzle to spray the aroma manually.
1. Make sure the aroma oil lled into the bottle for spraying.
2. Press at the top control panel to change the nozzle.
3. When selecting the nozzle, there will be a light indication on the side of the selected nozzle.
4. The setting sequence is Right Nozzle, Left Nozzle and Stop (no light).
5. The setting will automatically be saved.
OIL DIFFUSION INTENSITY
You can set up your desired aroma oil diffusion intensity, you have three options.
1. Press on the top control panel to select intensity: (intensive), (medium) and (low).
2. The setting will automatically be saved.
MOOD LIGHT
Your aroma diffuser has a colourful mood light in the base of the unit. You can select
one colour or set all of the colours on a loop.
1. Press on the top control panel, you can select OFF, 01 (red), 02 (pink), 03 (orange),
04 (yellow), 05 (green), 06 (blue), 07 (purple) and LOOP. The colour will light up, as you are selecting.
2. The setting will automatically be saved.
CUSTOMIZE AROMA OIL DIFFUSION PROGRAM
You can customise two programs (P1/P2) for two different schedule.
To activate & deactivate a program:
1. Press P1/P2 to activate the program. P1/P2 will be displayed on the LCD.
2. Press P1/P2 to turn the program OFF.
To set a program:
1. To setup a program.
2. Press and hold P1/P2 to enter setting mode.
3. When the nozzle indicator is ashing, press to select your desired direction.
Press P1/P2 to save the setting and enter next step (aroma oil diffusion intensity setting).
WA328 EN manual.indd 4 5/5/14 12:31 PM
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WA328 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WA328 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info