796577
77
Zoom out
Zoom in
Previous page
1/80
Next page
SCH
4
请确保依照安装支架上的UP(向上)箭头,正确安装
3. 将安装支架上延伸接头插入发射器背面的插槽中。
下推发射器直至其固定到位(34)
将发射器安装在可被阳光直射的地方,以便太阳能
池板能够获得最佳供电(安装传感器章节)
选项2:将发射器安装在木板上
UP
UP
UP
12
34
1. 准备1木板、1个塑料安装支架和4未装平垫圈
和锁紧垫圈的A型螺钉(见上图 1)
2. 使用工具拧紧A型螺钉,将安装支架固定在木板上(
上图2)
请确保依照安装支架上的UP(向上)箭头正确安装。
3. 将安装支架上延伸出来的接头插入发射器背面
插槽中。向下推按发射器,直至其固定到位(见上图
34)
将发射器安装在可被阳光直射的地方,以便太阳能
池板能够获得最佳供电(安装传感器章节)
设置温湿传感器
温湿传感器可取室外温度和湿度固定传感器之前,
将其安装在金属安装支架上。
用带有锁紧垫圈和平垫圈的B型螺钉将传感器牢牢
地固定在金属安装支架上。如有必要,请使用扳手
(7)
选项1:将传感器安装在杆子上
1. 准备1根杆子和1个未装平垫圈、锁紧垫圈和六角螺
母的U型螺栓。
2. 利用4对平垫圈、 锁紧垫圈和六角螺母,用U型螺栓
把安装支架牢牢地拧紧到杆子上( 9)
3. 将杆子固定在您希望安置的室外位置上。
选项2:把传感器安装在木板上
1. 准备1木板、1个金属安装支架和4未装平垫圈
和锁紧垫圈的A型螺钉( 10)
2. 使用工具拧紧A型螺钉,将金属安装支架固定在木板
(11)
3. 将木板固定在您希望安置的室外位置上。
电缆连接
固定杆子或木板前,请将温度计及湿度传感器的电缆连
接至发射器。
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific THGN301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific THGN301 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 23.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info