587045

Oregon Scientific TD339 Manual

18
Zoom out
Zoom in
Previous page
1/31
Next page
18
ENG
4. Press to select Remove HS from the options.
5. Press
.
6. Enter the security PIN for the handset. The default PIN code is “0000”. For more information
about security PIN codes, refer to page 14.
7. Press
.
8. Press
or until the number for the handset you wish to remove is highlighted.
Tip: The handset number is shown on the display when it is in standby mode.
Note: You cannot remove the handset that you are using.
9. Press
.
10. Press
again to confirm your selection.
Clearing all handset and base unit registrations.
If you have registered numerous handsets and base units in your ThermoDECT telephone system, you may
experience problems registering new handsets as your system becomes more complex. Remember that a
single base unit can carry a maximun of 5 handsets, and that you cannot make intercom, 3-way, baby
monitor, or transfer calls between handsets that are registered to two different base units (refer to the
diagram on page 15 for a description). To clear all registrations and reorganize your telephone system,
perform the following procedures. You will have to be re-register the handsets and base units after you clear
the system (refer to page 14 for instructions).
To reset the registration information for a handset:
1. Remove the batteries.
2. Press and hold the
button.
3. Insert the batteries and close the battery compartment.
4. Release the
button. The handset display will flash the word TEST and sound with a melody.
5. Press the 5 key. The handset will show the words Not registered on the display.
6. Repeat Steps 1-5 to reset all the other handsets.
To reset the registration information for the base unit:
1. Unplug the base unit from the AC power source.
2. Press and hold the PAGE button
3. Plug in the base unit. The blue charge/in use light will flash.
4. Release the PAGE button after the blue light flashes three times.
5. Reregister all the handsets following the procedure on page 16.
Assigning a name to a handset
You can assign an 8-character name for each handset. The name you assign will display on the LCD
display area for the handset whenever the phone is in standby mode. To assign a name:
1. Press the
button.
2. Press
to select Handset Menu from the options.
3. Press
.
4. Press to select Handset Name from the options.
5. Press
.
6. Enter the new name for the handset using the chart on page 9 as a guide. Press the button
to delete the current entry. The maximum length for the name is 8 characters.
7. Press
to confirm your selection.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific TD339 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific TD339 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific TD339

Oregon Scientific TD339 Quick start guide - English - 2 pages

Oregon Scientific TD339 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info