301030

Oregon Scientific td 339 dect Manual

28
Zoom out
Zoom in
Previous page
1/31
Next page
28
ENG
“When I press the phone button, I hear the busy tone.”
You will hear a busy tone if the line is engaged with another handset that is registered to the same base
unit. Check the LCD display area for the EXT symbol. This symbol indicates that someone else is
already on the line.
“When I press the keys on my handset, nothing happens. The display is showing the
symbol.”
The
symbol means that the keypad lock feature has been activated. Refer to page 23 for
instructions on how to unlock the keypad.
“When I press the keys on my handset, digits appear on the display but I cannot make an outside
call.”
• You may have inadvertently activated the call barring function on this handset, which prevents
calls from being placed.
• The handset may be unable to find the base unit. Try moving closer to the base unit. If the
problem persists, try a different position for the base unit, following the instructions on page 6.
• If you have registered additional handsets to the same base unit, make sure they are not already
on a call. The LCD display on your handset will display the EXT symbol if the line is engaged.
• The dial mode setting may be incorrect. Refer to page 10 for instructions on how to set the dial
mode.
“My call was cut off when I went out of range of the base unit. Now I cannot use my handset.”
Please move the handset closer to the base unit. You may want to consider moving the base unit to
achieve a greater transmission range. Refer to page 6 for instructions.
“I hear a tone while I am using my handset, and the battery symbol on the display looks empty.”
The battery needs to be recharged. Put the handset into the charging cradle of the base unit until the
battery symbol looks full
. It may take up to 15 hours to fully recharge.
“I just recharged the batteries, but I still get a warning that they are not charged.”
The batteries may need to be replaced. Rechargeable batteries gradually lose their ability to be
recharged as they get older. Replace the batteries with two rechargeable Ni-MH batteries (AAA size).
“The handset does not ring when a call comes in.”
• Check that you have not turned off the ringer volume level. Refer to page 11 for instructions.
• Check that the total REN value of all equipment connected to your telephone line is not more than
4. You may need to disconnect one or more telephones to see if this helps.
“The caller display feature is not working”
You must subscribe for caller ID services through your telephone network provider for the caller ID to
display on your ThermoDECT telephone. Please check with your provider.
“The caller display works but the caller’s name does not display even when I am sure the caller is
using the same number that I entered in the phone book.”
If the caller’s number does not exactly match what you have entered in your phone book, including the
STD code and any prefixes, the phone book cannot match the name to the caller ID. Check the phone
book to make sure the full number is stored there.
“I pressed the phone button several times, but keep getting the busy tone and cannot get the blue
LED light to display on the base unit.”
Your handset may no longer be registered with the base unit. Unplug the AC power source from the
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific td 339 dect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific td 339 dect in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info