Manual Oregon Scientific td 339 dect (page 17 of 31) (English)

301030

Zoom out

Zoom in

1/31

ENG

1. Each base unit can carry a maximum of 5 handsets, and keeps a record of which handsets have been

registered to it.

2. Each handset keeps a record of which base unit(s) it has been registered to. A handset can be cross-

registered to up to 4 base units.

3. You may need to reset the registrations as you reorganize your telephone system. There are several

types of registration procedures, as follows:

Procedure Type Use this when:

A. Remove a handset registration Simple You are replacing a handset or discontinuing its

use (see page 17).

B. Register a new handset Simple You are adding a new handset to a base unit that

has > 4 registrations (see next section).

C. Clear all handset registrations Complex You are reorganizing your network (see page 17).

D. Clear all base unit registrations Complex You are reorganizing your network (see page 17).

Registering a new handset

The original handset you received with your base unit is automatically registered the first time you set

up your ThermoDECT telephone. You can add up to four additional handsets by registering them with the

base unit. Handsets are numbered 1 to 5.

To register a new handset:

1. On the base unit, press and hold the PAGE button until the blue In Use light flashes.

2. Press the

button on the handset that you wish to register.

3. Press to select Registration from the options.

4. Press

5. Press

or to select a base unit number that does not have a check mark ( ) next to it.

(Checked numbers have already been registered.)

6. Press

to display the PIN Code? prompt.

7. Enter the security PIN for the handset. The default PIN code is “0000”. For more information

about security PIN codes, refer to page 14.

8. Press

Result: The handset display will flash the words Base Search until it locates the base unit. Once

it finds the base unit, the base ID number will display on the handset. The base ID number is the

unique identifying number for your base unit. You do not need to record or remember this

number unless you are trying to register your handset to the base unit of another telephone

system.

9. Press to end the registration session.

Removing a handset

To remove a handset from your ThermoDECT telephone system:

1. Press the

button on a handset that you do not intend to remove.

2. Press

to select Setup from the options.

3. Press

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific td 339 dect in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon Scientific td 339 dect Manual

Product: