301030
9
Zoom out
Zoom in
Previous page
1/31
Next page
9
ENG
Using the handset speakerphone
To use the handset speakerphone during a conversation, press the button. The battery life for
speakerphone mode is ~ 1 hour.
To turn off the speakerphone, press the
button again.
Note: To adjust the speaker volume, press
first and then or .
Muting the microphone
You can temporarily mute the microphone on your handset to prevent a caller from hearing a side
conversation. To activate or deactivate the mute feature:
1. Press
to mute the microphone.
Note: The handset display shows the words Secrecy on while the microphone is muted. You
cannot press any digits on the keypad until you return to normal listening mode.
2. To return the handset to normal listening mode, press again.
Paging the handset from the base unit
To locate a lost or misplaced handset, press the PAGE button on the base unit. This forces the handset
to ring for 30 seconds. Once you locate the handset, press any key to end the page.
Displaying caller ID information
If you have subscribed to caller ID service through your local carrier, your ThermoDECT telephone can
display the name and number of a caller. To be displayed, the name must either be supplied by your
network provider or entered in your phonebook. Your phone can track the caller IDs for up to 10 callers,
along with the following information:
Caller number (up to 20 digits).
Caller name (up to 8 characters) if this is stored in the phonebook or supplied by your telephone
network provider.
The date and time of the last call made from the number.
The number of calls made to the number.
To display caller ID information:
1. With the handset in standby mode, press the
button to view the list of caller IDs. A No Entry
Stored message displays if there are no entries stored in the caller ID bank.
2. Press
or to select the name you want to check. If there is no number available for the
caller you select, a line (_____) displays on the handset. A warning tone sounds when you reach
the end of the list.
Tip: To place a call to the number, press the
button while the number is displayed on the
handset.
Deleting caller ID information
To delete call information for a caller ID:
1. Repeat Steps 1 – 2 above to select the caller ID for which you wish to delete call information.
2. Press the
button.
3. Press the
button.
4. Select Delete from the options.
5. Press
to confirm, or to cancel.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific td 339 dect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific td 339 dect in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info