Manual Oregon Scientific SE122 (page 5 of 85) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

796543

Zoom out

Zoom in

1/85

and mode banners

5. : Indicates battery power is low

6. : Indicates alarm in On

7. MODE: Toggle between modes; enter settings mode

8. ST/SP: Start / stop stopwatch

9. : Calorie unit

10. : indicates a heart rate reading is detected

11. : Upper / Lower heart rate limits reached

12. : Indicates keypad is locked

13. : Indicates stopwatch is running

14. : Activate backlight; lock / unlock keypad

15.

KCAL

: Display heart rate; activate high/low heart

rate alert

THE TRANSMITTER

The transmitter is used to count your heartbeat and transmit

the data to the receiver. To put it on:

1. Wet the conductive pads on the underside of the

transmitter with water or a conductive gel to help

establish a solid contact.

2. Strap the transmitter across the chest. Adjust the strap

until the transmitter sits snugly below the pectoral

muscles for an accurate heart rate signal.

HINTS

• The position of the transmitter affects its performance.

Move the transmitter along the strap for the best

transmission. Avoid areas with dense chest hair.

• In dry, cold climates, it takes the transmitter a while to

function steadily. This is normal, as the conductive pads

need a ﬁlm of sweat to improve contact with the skin.

NOTE To maintain the best performance of your chest belt,

please handle it with care according to the following:

• Do not wrap the chest belt in a wet towel nor with other

wet materials.

• Do not store the chest belt in a hot (about 50°C) and

humid (about 90%) environment.

• Do not place or wash the chest belt under running

water, instead clean it with a wet cloth.

• Do not place the conductive rubber face down on a

metal table or surface.

• Properly dry the chest belt immediately after use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific SE122 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon Scientific SE122 Manual

Product: