Manual Oregon Scientific RX 109 series (page 11 of 30) (English)

589158

Zoom out

Zoom in

1/30

SET CURRENT ALTITUDE AND RESOLUTION

When you first use the watch, it is important to set the current

altitude and local sea-level pressure so your ascending and

descending altitude can be accurately measured. You can

find the current altitude by comparing your position to a

topographical map, and then entering the value in the watch.

It is necessary to reset the altitude after being in a

pressurized chamber (such as an airplane).

For instructions on setting the sea-level pressure, refer to the

next section.

Tip: You can also set the current altitude and alarm limits with

the help of the PC software (see PC section). (RP109 only)

The sea level pressure reading will change if the altitude

is adjusted.

• Maximum / minimum altitude alert (sounds an alarm when

exceeded)

• Maximum / ascending, maximum descending speeds

• Current vertical speed

• Rate of altitude change

The altitude is shown it two ways, as a numeric value indicating

your current altitude, and as a bar chart indicating changes in

altitude. Both values will change as you move about.

In ALTI-BARO Mode, the current altitude is always

displayed in larger font, in every screen except the sea pres-

sure-setting screen.

ACCESSING THE ALTIMETER OPTIONS

Press MODE to access the ALTI-BARO mode, then press

SELECT/+ to loop through the options.

NOTE

Diagram Instructions

1. Press and hold FUNC/SET for 2 seconds while in

ALT mode.

2. Use SELECT/+ or ST/SP/- to change the value.

The value will change in unit increments based on

the resolution you set (next step) and the measure-

ment unit you selected when setting the CLOCK (➔

9).

3. Press FUNC/SET to switch to the Resolution set-

ting screen, then press ST/SP/- to change the

value. The resolution is the increment at which the

altitude will display: 3 / 10 ft, or 1 / 3 meters.

4. Press FUNC/SET to exit the setting mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific RX 109 series in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific RX 109 series

Oregon Scientific RX 109 series Additional guide - English, German - 2 pages

Oregon Scientific RX 109 series User Manual - German - 34 pages

Oregon Scientific RX 109 series Additional guide - Dutch - 2 pages

Oregon Scientific RX 109 series User Manual - Dutch - 36 pages

Oregon Scientific RX 109 series Additional guide - French - 2 pages

Oregon Scientific RX 109 series User Manual - French - 32 pages

Oregon Scientific RX 109 series Additional guide - Italian, Portuguese, Spanish - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon Scientific RX 109 series Manual

Product: