589131
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
GB
If you wish to disable the auto-reception feature, press the
button for three seconds. The radio reception signal will disap-
pear. The unit will not respond to radio signals.
To enable the feature again, press the
button for three seconds.
The radio reception signal will start blinking to initiate reception
automatically.
HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [SET/MODE] for three seconds.
The display will return to MODE 1, with the hour digits blinking.
Use
or to select the hour. Keep pressing the button will
increase or decrease the value rapidly.
Press [SET/MODE] to confirm. The minute digits will blink.
Repeat the same procedure to set the minutes, then the day-of-
month, month, display language, weekday and offset for the
second time zone.
Note that the time and date are displayed in 24-HOUR clock and
DAY-MONTH format, respectively. For display language, you
can choose among English (E), German (D), French (F) and
Italian (I) in order. Weekday is the usual sequence of Monday
through Sunday.
For the second time zone, which is indicated by the ZONE ICON,
enter the hour offset using the
or buttons and the RMR182
will calculate the second time accordingly. For details, please refer
to the section “Time Zone And Offset Table”.
If there is an item you do not wish to change, simply press
[SET/MODE] to bypass the item.
When you are done, press [SET/MODE] to exit. The display will
return to the mode last chosen.
HOW TO SET AND ARM THE ALARMS
The RMR182 has two alarms, ALARM 1 and ALARM 2. They can
be invoked together or independently.
To set an alarm:
1. Press [(
( • ))] once to select ALARM 1 or again to select ALARM
2. The last selected time of the alarm will be displayed. If you
have never set the alarm before, the time will be displayed as
0:00.
2. Press [(
( • ))] for three seconds. The hour digits will blink.
3. Enter the hour using or .
4. Press [(
( • ))]. The minute digits will blink.
5. Enter the minutes using
or .
6. Press [(( • ))] to exit.
The alarm ON icon [
] for the alarm chosen will be displayed
indicating the alarm set above is now armed.
You can also arm or disarm an alarm by pressing the [AL ON/OFF]
button.
HOW TO STOP AN ALARM
To stop an alarm, you can use either [(( • ))] or [AL ON/OFF].
Pressing [(( • ))] will stop the alarm, which is still armed and will go
off at the set time the following day.
If [AL ON/OFF] is pressed instead, the alarm will be stopped and
deactivated all together.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific RMR182 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific RMR182 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific RMR182

Oregon Scientific RMR182 User Manual - Dutch - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info