587152

Oregon Scientific RA201 Manual

18
Zoom out
Zoom in
Previous page
1/22
Next page
18
GB
Delete all LAP memory groups
1. Press SELECT in TIMER 1 mode after it is reset to 00:00:00 to
enter the LAP memory recall mode.
2. Press and hold FUNC for 2 seconds to enter the LAP memory
delete mode.
3. Press SELECT to select deleting all LAP memories.
4. Press and hold FUNC for 2 seconds to confirm the deletion of
all the LAP memories. “donE” followed by “--” will be shown
on the display after the deletion.
5. Press FUNC to quit to TIMER 1.
Refer to Fig. 5e to delete all LAP memory groups for TIMER 1.
Notes:
a) If left idle for 30 sec, it will go back to TIMER 1.
b) To cancel the deletion of the LAP memory groups, press FUNC
to go back to the LAP memory recall mode.
TIMER 2 – 10 MIN SAILING TIMER/TIMER 3 – 6 MIN
SAILING TIMER
RA201 has two pre-set sailing timers: TIMER 2: 10 min sailing
timer and TIMER 3: 6 min sailing timer. These sailing timers function
as a countdown timer but with countdown time fixed at 10 minutes
and 6 minutes and the timer minute can be increased or decreased
while the timer is running.
1. Press FUNC from any display mode: sail-local pressure, sail-clock,
sail-altitude and sail-temperature to access to the sailing timer.
2. Press FUNC toggle to TIMER 1, TIMER 2 or TIMER 3.
3. Press ST/SP to start or stop the timer once either TIMER 2 or
TIMER 3 is selected.
4. Press +/- to increase or decrease the full counting minute while
the timer is running.
5. Press SP to stop the timer.
6. Press and hold SET for 2 seconds to reset the TIMER to the
initial pre-set value.
Refer to Fig. 5f for TIMER 2 and TIMER 3 display mode.
Notes:
a) During count down the timer minute can be increased or
decreased to the full counting minute.
b) When reaching every full minute there will be a short double
beeping sound.
c) When countdown time reaches 5 minutes, there will be short
double beeping sound for 5 seconds.
d) When countdown time reaches the last minute, there will be
continuous beeping with 1 second on and 1 second off cycle.
e) For the last 5 seconds of the countdown there will be a
continuously beeping sound.
Timer 1 -Chronometer
Timer 2 - 10 min
sailing timer
Timer 3 - 6 min
sailing timer
Fig.5f
FUNC
ST/SP
SET
FUNC
FUNC FUNC
+-+-
ST/SP
SET
Fig. 5f
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific RA201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific RA201 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific RA201

Oregon Scientific RA201 User Manual - German - 24 pages

Oregon Scientific RA201 User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info