589195

Oregon Scientific PMP238N Manual

5
Zoom out
Zoom in
Previous page
1/7
Next page
GB
5
To start the timer:
-Press [ST / SP]. The timer will start.
Note:
-When the timer reaches 0:00:00 a beeping alarm will
activate to indicate that the timer has completed its
cycle. The alarm will last for one (1) minute. After
one minute, the alarm will continue to make one
short beeping sound once every two-minutes. To
stop the alarm, press any button and the timer will
utomatically reset to the original timer setting.
-When the timer is active, the timer icon will appear
and be flashing on the pulse-mode display and the
clock display.
To stop the timer:
-Press [ST / SP]. The timer will pause until [ST / SP] is
pressed again.
To clear the timer:
1. Press and hold [MODE] for 2-seconds. The digits will
return to zero and the hour digits will flash.
2. Without entering a number for the hours, press [MODE]
again. The Minute digits will flash.
3. Press [MODE] a final time to exit the timer-setting
mode.
The timer is now cleared.
To reset the timer to its originally set time:
-Press and hold [ST / SP] for 2-seconds. The display
will return to its originally set time.
MAINTENANCE
1. Do not immerse the unit in water. If the unit comes in
contact with water, dry it immediately with a soft
lintfree cloth.
2. Do not clean the unit with abrasive or corrosive
materials. Abrasive cleaning agents may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive: force, shock,
dust, temperature, or humidity. Such treatment may
result in malfunction, a shorter electronic life span,
damaged batteries, or distorted parts.
4. Do not tamper with the unit’s internal components.
Doing so will terminate the unit’s warranty and may
cause damage. The unit contains no user-serviceable
parts.
5. Only use new batteries as specified in this instruction
manual.
6. Read this instruction manual thoroughly before
operating the unit.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific PMP238N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific PMP238N in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info