589177
5
Zoom out
Zoom in
Previous page
1/9
Next page
5
EN
ABOUT THE TEMPERATURE ALARM
Whenever the alarm is activated, the alarm will sound for 1
minute when the current temperature rises and crosses the
high or low temperature alarm limit.
If the unit is left unattended, the alarm will stop automatically
after 1 minute to conserve power but will issue a 3-second
repeater ‘beep’ sound every minute for up to 12 hours as a
continued warning that the temperature has moved outside
the alarm limit.
The repeater alarm will continue to sound even if the
temperature later returns to the allowed temperature band,
until the alarm is deactivated.
NOTE If the unit shows the MAX/MIN DISPLAY MODE,
the respective alarm indicator – either HI or LO will flash
continuously for up to 12 hours, or until the alarm is
deactivated.
If the unit shows the HI/LO DISPLAY MODE, the respective
alarm limit digit will flash continuously for up to 12 hours, or
until the alarm is deactivated.
HOW TO SELECT THE ON / OFF OF THE
TEMPERATURE ALARM
Activating the Alarm
1. Slide the [ALARM ON / OFF] switch to the ON position
to activate the temperature alarm.
NOTE If the [ALARM ON / OFF] switch is in the OFF position
and the temperature has already risen / dropped and passed
the high or low limit, at that instant, no alarm will sound if
the [ALARM ON/OFF] is switched to the ON position so
that no alarm will sound.
Deactivating the Alarm
1. When the alarm sounds, the alarm can be stopped by
pressing either the [HI], [LO] or [MEMORY CLEAR]
buttons.
The Thermometer will sound the alarm again next time,
when the temperature rises and passes the high or low
temperature alarm limit.
2. Slide the [ALARM ON / OFF] switch to the OFF position,
to switch off the alarm permanently.
NOTE Indoor high / low temperature alarm limit can be set
to work whenever the outdoor sensor probe is removed.
NOTE Outdoor high / low temperature alarm limit can be
set to work whenever the outdoor sensor probe is inserted
into the sensor jack.
HOW TO SET THE HIGH / LOW TEMPERATURE
ALARM LIMITS
The unit must show the HI/LO DISPLAY MODE to allow the
alarm to be set.
To set the high temperature alarm limit, press the [HI] button
to increase by 1° increments until the desired high
temperature alarm limit is displayed.
NTS912manual-E 04/12/15, 5:39 PM5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific NTS912 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific NTS912 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific NTS912

Oregon Scientific NTS912 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info