526316
6
Zoom out
Zoom in
Previous page
1/13
Next page
EN
6
SET UP REMOTE TEMPERATURE / HUMIDITY SENSOR
LW301/302
1. Slide to open the battery compartment cover.
2. Slide channel switch to select a channel (1, 2, 3).
Ensure you use a different channel for each sensor.
3.
Place the batteries in the compartment following the
polarity label +/-.
4.
Press RESET after each battery change.
5.
Align the cover at against the battery compartment,
then slide it until it clicks into place to lock the cover.
NOTE
Ensure to set at least one sensor to be channel
one, the data of channel one will be shown on LIVE page
in the application (page 8).
SET UP RAIN GAUGE
LW301
The rain gauge collects rain and takes rainfall readings.
SET UP WEATHER SENSOR RECEIVER
LW301/302
For continuous use, connect the weather sensor receiver
to Internet-connected hub using receiver connection
cable provided.
1. Using provided LAN cable, connect one end to the
ETHERNET socket on the Internet-connected hub
and the other end to the router.
2.
Using provided receiver connection cable, connect one
end to the receiver connection socket
(
1 or 2) on the Internet-connected hub
and the other end into the USB socket
on the weather sensor receiver. on the
weather sensor receiver.
3.
Plug the large end of the power adapter into a power
outlet not controlled by a wall switch. Plug the small
end of the power adapter into the power socket on
the Internet-connected hub.
4.
Once connected, the weather sensor receiver will
send the data to the Internet-connected hub via
receiver connection cable.
LED Light Meaning
Continuously on Connection successful
Fast blink Searching
Slow blink Lost link
Protracted blink No device found
1. Remove screws and slide the cover
off in an upwards motion.
2.
Place the batteries in the compartment
following the polarity label +/-. Press
RESET after each battery change.
3.
Remove the bre tape.
LW301_UM_EN_R8.indd 6 2012/8/14 3:06:15 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific LW302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific LW302 in the language / languages: English as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific LW302

Oregon Scientific LW302 User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info