589257
9
Zoom out
Zoom in
Previous page
1/19
Next page
EN
8
USING THE TRANSMITTER DOCK ADAPTER
1. Connect the AC adapter connector into the DC IN
9V / 800mA jack at the back of the transmitter dock.
2. Plug your AC adapter into an electrical socket.
NOTE Always use the supplied AC power adapter that
is designed specifically for the transmitter dock only.
Using any other AC power adapter may cause the unit
to malfunction and increase the risk of fire or injury.
NOTE Should you notice any abnormality in the
transmitter dock AC adapter, disconnect it from the
electrical socket and transmitter dock immediately and
take it to a qualified Oregon Scientific dealer for servicing.
DOCKING THE iPOD
The transmitter dock acts as a docking station for
different versions of the iPod:
1. Insert the appropriate docking tray intended
specifically for use with your iPod model into the
transmitter dock.
TIP View the engraving at the bottom of each tray, which
contains an iPod description and / or size of internal
hard disk to ensure that you correctly match the
appropriate tray for your iPod.
2. Insert the iPod into the docking tray. Make sure to
align the docking trays connectors with the iPod
connection slot.
If batteries run low on power and AC adapter is plugged
in:
WALL MOUNTING THE SPEAKER
(OPTIONAL)
The speaker is equipped with rubber supports to give
your unit a stable base while placed on a flat surface.
NOTE Placement of this product on wood surfaces with
certain types of finishes, such as clear varnish, may
result in damage to the finish. Consult the furniture
manufacturers care instructions for direction as to the
types of objects that may safely be placed on the wood
surface. Oregon Scientific shall not be responsible for
any damage to wood surfaces from contact with this
product.
Fix the location of your speaker against the wall using
the supplied allen key, L-shaped wall-mount unit and 4
screws:
1. Position the wall-mount units vertical panel onto the
area of the wall where you would like to hang the
unit.
2. Secure the 15 mm (0.6 in) screws into the
corresponding holes of the vertical panel until it is
firmly fixed against the wall.
3. Place the speaker onto the horizontal panel of the
wall-mount unit, making sure to align the 2 screw
holes of the horizontal panel with those of the
speaker.
4. Insert the remaining two 10mm (0.4 in) screws
into the aligned holes and secure the speaker onto
the horizontal panel. The wall-mount unit and
speaker should be securely fixed in place.
appears to show
speaker is being
operated by AC power.
does not appear.
or appears.
EU_IB368manual(eng)R12 8/31/2005, 3:51 PM8
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific IB368 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific IB368 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific IB368

Oregon Scientific IB368 User Manual - German - 19 pages

Oregon Scientific IB368 User Manual - Dutch - 18 pages

Oregon Scientific IB368 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info