589248
11
Zoom out
Zoom in
Previous page
1/19
Next page
EN
10
TIP
NOTE
NOTE
1. Detach the speaker stand from its support housing using the allen key (provided).
2. Pull out the light / dark gray speaker wire from the speaker wire terminals.
3. Untie the speaker wire knot.
4. Pull the wire out from the speaker stand.
5. Insert the speaker wire through the wall-mount hole and re-attach to the corresponding color speaker terminals.
6. Screw the flat wall-mount to the back of the speaker.
7. Screw the wall-mount bracket into the wall. Be sure to screw into a solid surface.
8. Attach the speaker to the wall mount bracket.
Each speaker should ideally be mounted approx. 0.9 meters (3 feet) above ear level to achieve an optimum listening
experience.
ADDITIONAL CONNECTIONS (OPTIONAL)
AUXILIARY
At the back of the unit are Aux (Auxiliary) in / Audio out jacks, allowing for connections to additional audio systems or speakers.
Simply connect the appropriate cable wires to the jacks of the audio system. Press the remote control aux button. "AUX"
appears on the VFD. Operate the unit and additional devices as normal.
Aux feature can be controlled from the remote control only, not from the unit itself.
EARPHONES
Similarly, while the slim speakers and subwoofer provide crystal clear audio playback, you may optionally connect earphones to
the earphone jack at the back of the unit and listen to audio at your own convenience and without disturbing others.
BASIC OPERATIONS
References to "CD" or "disc" includes both audio CDs and MP3 / WMA CDs unless otherwise noted.
SETTING THE CLOCK
1. To adjust the system clock, power off the unit so that it is in standby mode.
2. Press the / button on the unit. The clock minutes will flash on the unit's VFD. Press the - / + button on the unit to
adjust the minutes by 1-minute increments. Press and hold to adjust more quickly.
3. Press the / button on the unit again. The clock hours will flash on the VFD. Press the - / + button on the unit to adjust
the minutes by 1-hour increments. Press and hold to adjust more quickly.
4. Press the / button to confirm the desired clock setting.
+06(QJ5B1RYB 11/10/2005, 08:13 PM10
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific HMS388 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific HMS388 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific HMS388

Oregon Scientific HMS388 User Manual - German - 19 pages

Oregon Scientific HMS388 User Manual - Dutch - 18 pages

Oregon Scientific HMS388 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info