796448

Oregon Scientific ESM200 Manual

7
Zoom out
Zoom in
Previous page
1/116
Next page
EN
5
HOUSEHOLD POWER CABLES AND PHASE
Electricity is generally supplied using single-phase and
three-phase systems.
UK: Most homes in the UK use single-phase supplies. In
single-phase supplies, the current ows to and from your
household appliances using a neutral and live wire. The
neutral wire has a voltage close to zero while the live wire
carries a voltage from 120 to 240 volts. The difference
between these two wires makes the current ow through
your appliances.
Europe: Most homes in Europe use three-phase supplies.
In three-phase supplies, current ows to and from a
device through a group of three wires - each one carrying
a uctuating phase. The three wires, therefore, each need
an individual current sensor which can be purchased
separately.
GETTING STARTED
LOCATE LIVE OUTGOING SUPPLY CABLE
The sensor clamp should be tted over the insulated live
wire. It is recommended that you t it over the (outgoing)
wire which comes out of the electricity meter located in the
meter box.
This product uses Type C current sensor, do not apply
around or remove from HAZARDOUS LIVE conductors.
Under no circumstances should any force or undue pressure
be applied to any wiring or connections.
WARNING Care must be taken at all times to avoid
touching or coming into contact with any un-insulated wires
or contacts. If any difculty with installation is experienced at
all, the advice of a licensed electrician should be sought.
SENSOR SET UP
WARNING It is recommended for current sensor clamp(s)
to be installed by a licensed electrician. Switch off power
from the mains before attaching and detaching sensor(s).
1. Using thumb and nger, press inwards on plastic tabs
located on either side of the sensor clamp to release top
part.
2. Lift the top of the sensor away.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific ESM200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific ESM200 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 8.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info