Manual Oregon Scientific ESM100 (page 7 of 100) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

796446

Zoom out

Zoom in

1/100

TIP The transmission range may vary depending on

many factors. You may need to experiment with various

locations to get the best results.

MAIN UNIT SET UP

1. Slide open the battery compartment cover.

2. Insert the batteries, matching the polarities (+ / -).

3. Press RESET after each battery change.

4. Close the battery door.

SENSOR DATA TRANSMISSION

If main unit does not display data or after each

transmitter battery change:

1. Press and hold CHECK (located in the transmitter)

until LED light ﬂashes. Transmitter will check for

and transmit data to the main unit every 2 seconds

for 30 seconds.

2. Press and hold UP on the main unit to search for

signal from transmitter.

UNDERSTANDING ELECTRICITY

Voltage

(volts)

Electrical potential. Fixed at 220V-

250V or 120V depending on region.

Current

(amps)

Amount of electricity ﬂowing through,

e.g., a wire. (The sensor measures this

to determine watt)

Power

(watts)

Amount of energy being transferred.

(KW = 1000W). This type of data is

displayed on the top line of Energy

mode.

KWh is a measure of consumption. Kilowatt hour

represents the use of 1000W of electricity for 1 whole

hour, which is equivalent to ten x 100W light bulbs

operating at the same time for 1 hour.

Once cost rate of electricity has been inputted, the

monitor can arrive at an estimated cost.

NOTE This product is for educational purposes only.

Its aim is to aid understanding of the cost of operating

electrical appliances in the home. It does not replace

your accurate electricity revenue meter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific ESM100 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 10.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon Scientific ESM100 Manual

Product: