589221
4
Zoom out
Zoom in
Previous page
1/5
Next page
ESPAÑOL
ENGLISH
FRANÇAIS
DEUTSCH
PORTUGUÊS
DS8238 Q.S.Guide-8 langs. (086-003006-037)
PORTUGUÊS
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ITALIANO
ESPAÑOL
Focus Options Table
Icon Mode Description
Scene This mode is used when the subject
is far. The camera will focus on the
subject in the viewfinder’s frame when
the Shutter Release Button is pressed
halfway. Range: 1.5m to .
Macro This mode is used when the subject
is near. Range: approx. 24cm.
Inital Flash Settings
When you turn on your camera, the inital flash setting will vary depending on the
level of your battery.
Battery Status Inital Flash Setting
or The flash setting is always on Auto at these battery levels when
the mode switch changes to camera mode.
or The inital flash setting is . However, you can manually
set the flash to other settings.
Toggling Between Flash Modes
Flash Mode Options Table
Icon Function Description
Auto The flash may discharge automatically, depending on the light
conditions. The Flash Lamp lights red when this is selected.
Flash Off The flash will not discharge. The Flash Lamp lights red
when this is selected.
Flash On The flash discharge regardless of lighting condition. The
flash lamp lights green when this is selected.
BASIC PHOTOGRAPHY
QUICK START
1. Frame your subject in the viewfinder. The frame in the middle of the viewfinder
indicates the zone of automatic focusing. You can also view the subject on the OSD.
2. Press the Shutter Release Button.
3. The image taken is displayed on the OSD for approximately a second (Auto Review).
4. Once the Auto Review has finished, you may proceed to take the next picture.
When memory is full, no more images can be stored. The camera will
beep and the words “Internal Memory Full” will appear on the LCD if
you press the Shutter Release Button.
When you have finished taking your pictures:
1. Turn to Mode Dial to Off.
2. Place the lens cover securely over the lens.
1. Remove the
lens cover from
the lens.
2. Turn the Mode
Dial to Camera
Mode.
3. Check the
battery indicator,
making sure
there is enough
power.
1. Loop the strap
over your wrist.
2. Hold the camera
firmly.
3. Avoid blocking
the lens and flash.
4. Do not move nor
remain in motion
while taking
pictures. Use a
tripod if necessary.
Preparing the camera
Holding the camera
Taking Basic Pictures
Shutting Off the Camera
Selecting a Focus Mode
Press
Press Press
Selecting a Flash Mode
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific DS8238 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific DS8238 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific DS8238

Oregon Scientific DS8238 User Manual - English - 20 pages

Oregon Scientific DS8238 Quick start guide - French - 4 pages

Oregon Scientific DS8238 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info