589220
16
Zoom out
Zoom in
Previous page
1/19
Next page
ESPAÑOL
ESPAÑOL
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
PORTUGUÊS
DS8228 Manual-Eng (086-002861-054)
PORTUGUÊS
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
2. Press or to set the number of prints of all stored images in the CF card, for up to a
maximum of 9 copies.
3. Follow the rest of the options to confirm the DPOF setting.
Slideshow Setting (Slide Show)
You can play back all the images and movies in a
slideshow format. The interval between images
can be specified.
During the slideshow, press MENU to pause.
From here, you may choose to continue or exit
the current slideshow.
Slideshow Options
Settings Descriptions
Cancel Return to the Playback Menu.
Start Start Slideshow according to the specified
Interval and Repeat options.
Interval Specifies to amount of time the camera
will display an image before moving on to
the next image. The options are 3 sec.,
5 sec., and 10 sec.
Repeat When set to On, the slideshow immediately
replays when the final image is displayed.
CONNECTING TO EXTERNAL DEVICES
USING A TRIPOD WITH THE CAMERA
You can secure your digital camera to a tripod to prevent camera shakes. To install, screw
the tripod to the Tripod Hole (
p.3).
CONNECTING TO A TV
You can playback the images and movies you have recorded on your TV. Connect your
digital camera to the TV via the video cable included in the camera's gift box.
Caution: Turn off the TV and digital camera before connecting the video cable.
1. Plug the video cable into the Video/Audio Socket of the camera (
p.3).
2. Connect the video cable's yellow connector to the yellow AV input terminal of your TV.
Refer to your TV's manual for more information.
3. Turn the TV and digital camera on. Make sure to switch the TV to the appropriate AV
channel display.
The OSD is automatically off when the camera is connected to a TV.
Use an AC Adapter if you intend to connect the camera to a TV for a long period of
time.
CONNECTING TO A WINDOWS-BASED PC
Use the USB cable included to connect to your Windows PC. This enables you to upload,
download, edit, and playback pictures and movies on your PC. However, the PC software
must be installed first.
Pentium 66MHz 16-bit colour display at 800x600
64MBytes RAM USB 1.1 interface
350MBytes Hard disk space Windows 98/98SE/ME/2000/XP
CD-ROM drive
1. Insert the CD labelled "DS8228" into your CD-ROM drive. The installation will start
automatically.
If the "autorun" feature is disabled on your PC, start the installation by running
[x:\setup.exe] where "x:" is the drive letter of the CD-ROM drive.
2. Follow the on-screen instruction to complete the installation of the camera drivers and
the ArcSoft PhotoImpression 3.0 software. When done, click on the [Finish] button on-
screen to restart the PC.
Only the images and movies stored in the camera's current memory device (CF
card or internal memory) will be visible on the PC.
The OSD is automatically off when the camera is connected to the PC.
1. Turn on your PC and allow your system's Windows operating system to boot up.
2. Turn off your digital camera. Connect the camera and your PC via the USB cable. The
USB terminal on your camera is located inside the Terminal Cover (
p.3). Refer to
your PC's manual to locate the USB connection on the PC.
3. Turn on your digital camera to any Mode. The LCD display on the camera now shows
"- PC -".
26 27
Delete
Protect
DPOF
Slide Show
1/1 Exit OK
OK
MENU
SetupPlayback
Auto
Off
O.OEV
Central
2/2 Exit OK
OK
MENU
Slide Show
1/1 Exit OK
OK
MENU
Auto
Off
5 sec.
Off
Cancel
Start
Interval
Repeat
Pre-Installation Checklist
Installing Drivers and Software
Connecting the Camera to the PC
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific DS8228 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific DS8228 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific DS8228

Oregon Scientific DS8228 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info