589220
8
Zoom out
Zoom in
Previous page
1/19
Next page
ESPAÑOL
ESPAÑOL
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
PORTUGUÊS
DS8228 Manual-Eng (086-002861-054)
PORTUGUÊS
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
Focus Options Table
Icon Mode Description
Scene This mode is used when the subject is far. The camera will focus on the
subject in the viewfinder's frame when the Shutter Release Button is
pressed halfway. Range: 60cm to .
Macro This mode is used when the subject is near. Range: approx.
18cm to 60cm.
To toggle between Flash Modes, press the
button on the camera and observe the Flash
Icon on the LCD Display. The Flash Lamp on the camera lights up when flash is enabled,
signalling that the flash is ready for use. When a picture with flash is taken, the Flash Lamp
will blink for a second to recharge. Once it lights up, flash can be used again.
Toggling Between Flash Modes
Flash Mode Options Table
Icon Function Description
Auto The flash may discharge automatically, depending on the light
conditions.
Flash Off The flash will not discharge.
Auto + Red This mode reduces "red eye" caused by the flashlight reflecting in
Eye Reduction the subject's eyes. The flash may discharge, depending on the light
condition.
Flash On + This mode reduces "red eye" caused by the flashlight reflecting in
Red Eye the subject's eyes. The flash discharges automatically, regardless of
Reduction lighting condition.
Icon Function Description
Flash On The flash discharges regardless of lighting condition
Slow This mode uses a slow shutter speed in combination with flash. The
Synchronous fired flash freezes the subject in the foreground while capturing the
Flash background scene.
In and modes, there will be a brief initial flash before the main flash is
emitted. This is done to reduce the "red eye" effect in images.
Your digital camera comes with a 2X zooming function. By default, the zooming is not enabled.
1. In Camera, Scene, or Movie mode, enable zooming by pressing
on the 4-Way
Controller (
p.4).
2. A Digital Zoom Icon,
, appears on the OSD to indicate that the 2X zoom is in effect.
3. To cancel the 2X zoom, press
on the 4-Way Controller ( p.4). The camera then
returns to normal shooting range.
The Shutter Release button has two different functions:
Action Function Description
Pressed Lock Subject Focus, exposure, an white balance of the scene within
Halfway within Viewfinder the viewfinder is locked. If the subject is in focus, the
green status LED lights up.
Pressed Take picture The scene within the viewfinder is taken and stored in
Fully memory. If the scene has not been locked, the image
taken may be blurry.
The Self-Timer function counts down before the camera automatically takes a picture by
itself. This is useful when you want to be in the picture, and there is no one else to press the
Shutter Release Button.
1. Turn the Mode Dial to Camera or Scene Modes.
2. Press
on the 4-Way Controller. The Self-Timer will engage.
11
PRESS PRESS PRESS PRESS PRESS
PRESS
Continued:
10
Selecting a Flash Mode
Zooming
Using the Shutter Release
Using the Self-Timer
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific DS8228 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific DS8228 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific DS8228

Oregon Scientific DS8228 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info