589399

Oregon Scientific BPW120 Manual

6
Zoom out
Zoom in
Previous page
1/13
Next page
6
EN
the deflation process starts, during which time the main unit
detects pressure oscillations generated by beat-to-beat
pulsatile, which is used to determine the systolic, mean and
diastolic pressure, and also your pulse rate. Any motion during this
period will result in an incorrect measurement. After all readings
are determined and displayed on LCD, the measurement is finished
and the wrist cuff automatically deflates.
E
NOTE
· Replace the batteries whenever the weak battery mark
(
) shows, the display is dim, or the display does not
illuminate when the power is on. Replace all the batteries
at the same time – it is dangerous to mix old and
new batteries.
· Contact your local waste disposal authority for instructions
on how to dispose of used batteries. Used Batteries can
be harmful to the environment, and should not be thrown
out with household trash.
SETTING THE DATE, TIME, AND MEASUREMENT UNIT
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record
that is stored in the memory.
1. Press and hold SET for 2 seconds to enter the setting
mode.
The setting order is as follows: 12/24 hour format, hour,
minute, year, month/day or day/month format, month,
date, and measurement unit (mmHg or kPa).
2. Press MEM / UP to increase a value or change the setting.
3. Press SET to accept the change and switch to the next
setting.
4. When you are finished, press ON to exit the setup menu.
Figure 5cFigure 5bFigure 5a
GETTING STARTED
INSTALLING AND REPLACING THE BATTERIES
To install the batteries:
1. Slide off the battery cover (Figure 5a).
2. Install the batteries by matching the correct polarity,
as shown by Figure 5b. Always use the correct
battery type (2 Alkaline LR03 AAA-size).
3. Replace the cover (Figure 5c).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific BPW120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific BPW120 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific BPW120

Oregon Scientific BPW120 User Manual - German - 15 pages

Oregon Scientific BPW120 User Manual - Dutch - 15 pages

Oregon Scientific BPW120 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info