589392
4
Zoom out
Zoom in
Previous page
1/11
Next page
4
GB
Note that the effective range is vastly affected by the building materials
and where the main and remote units are positioned. Try various set-
ups for best result.
Though the remote units are weather proof, they should be placed away
from direct sunlight, rain or snow.
BATTERY AND CHANNEL INSTALLATION:
REMOTE UNIT
The remote thermo-hygro sensor unit uses two (2) UM-4 or “AAA” size
alkaline batteries.
Follow these steps to install / replace batteries:
1. Loose the screw on the battery door.
2. Select the channel number on the CHANNEL slide switch.
3. Select the temperature display unit on the °C/°F slide switch.
4. Insert the batteries strictly according to the polarities shown therein.
5. Replace the battery door and secure its screws.
Replace the batteries when the low-battery indicator of theparticular
channel lights up on the main unit. (Repeat the steps described in
section (“BEFORE YOU BEGIN”)
Note that once a channel is assigned to a remote unit, you can only
change it by removing the batteries or resetting the unit.
BATTERY INSTALLATION: MAIN UNIT
The main unit uses two (2) UM-3 or “AA” size alkaline batteries.
Follow these steps to install / replace batteries:
1. Remove the screw to open the battery door.
2. Insert the batteries strictly according to the polarities shown therein.
3. Select the temperature display unit on the °C / °F slide switch.
4. Replace the battery door and fasten the screw. Replace the batteries
when the low-battery indicator of the indoor temperature lights up
(Repeat the steps described in section "BEFORE YOU BEGIN")
A A A
A A A
Battery door
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific BHGR618 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific BHGR618 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific BHGR618

Oregon Scientific BHGR618 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info