461273

Oregon Scientific BAR938HG Manual

5
Zoom out
Zoom in
Previous page
1/7
Next page
GB
5
NOTE ON °C AND °F
The outdoor temperature display on the main unit is dominated by
the selection on the °C/°F slide switch of the main unit. Whatever
the display unit of the remote sensor is, it will only apply to the
remote sensor itself and the temperature will be automatically
converted to the chosen one of the main unit.
MAXIMUM AND MINIMUM
TEMPERATURES
The maximum and minimum recorded temperatures will be auto-
matically stored in memory. To display them, press MEMORY to
toggle among the maximum, minimum and current temperatures.
The respective MAX or MIN indicator will be displayed.
To clear the memory, hold down MEMORY for three seconds. The
maximum and minimum temperatures will be erased. If you press
MEMORY now, the maximum and minimum temperatures and
humidities will have the same values as the current one until
different readings are recorded.
TEMPERATURE AND HUMIDITY TREND
The temperature and humidity trend indicator shows the trend of
temperature changes for the last minutes. Three trends, rising,
steady and falling, will be shown.
WEATHER FORECAST
BAR938HG is capable of detecting atmospheric pressure changes,
and basing on the data collected, can predict the weather for the
forthcoming 12 to 24 hours. The effective range covers an area of 30
to 50 km.
sunny
partly cloudy
cloudy rainy snowy
NOTE:
1. The accuracy of a general pressure-based weather forecast is
about 70 to 75%, and therefore, cannot be held responsible
for any inconveniences so caused by an inaccurate one.
2. The weather forecast is meant for the next 12 to 24 hours. It may
not necessarily reflect the current situation.
3. The “Sunny” icon, when applies to night time, implies clear
weather.
COMFORT LEVEL INDICATORS
The comfort level indicators COM, WET or DRY will tell you if the
curent environment is comfortable, too wet or too dry.
The comfort indicators will appear on the display of the main unit
when the following conditions are satisfied:
HOW TO CHECK
THE BAROMETRIC PRESSURE
The current and historical barometric pressure is shown on the
atmospheric pressure window.
For users staying at a higher altitude such as in the mountain area,
sea-level barometric pressure applies. In this case, press and hold
HISTORY button to enter the altitude compensation setting mode.
Use the UP or DOWN button to select from –100 to 2500 meters
(whichever appropriate). Press HISTORY button to confirm and
exit. If the altitude changes, the “ALT” icon will flash to indicate
such change. It will stop flashing when the pressure reading is
recorded again.
The atmospheric pressure can be displayed in mb/hPa or inHg. The
pressure unit is selected on the atmospheric pressure slide switch
inside the battery compartment.
If you want to check the pressure history for a particular hour
during the past 24 hours, press the HISTORY button. Each press
on the button will go back by an hour.
The recorded atmospheric changes for the past 24 hours are dis-
played in a bar chart above the atmospheric pressure window.
Arrow
indicator
Temperature
Trend
Steady FallingRising
Arrow
indicator
Humidity
Trend
Steady FallingRising
Indicator
displays
on the unit
Temperature
Range
20°C to 25°C
(68°F to 77°F)
-5°C -+ 50°C
(23°F - 122°F)
-5°C -+ 50°C
(23°F - 122°F)
Humidity
Range
40%RH-
70%RH
OVER-
70%RH
Below
70%RH
Shows that the
Current
Environment
Ideal range for
both relative
humidity and
temperature
Contains excess
moisture
Contains
inadequate
moisture
No
Indicator
Less than
20°C( 68°F) or
More than
25°C (77°F)
40%RH
to
70%RH
No comment
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific BAR938HG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific BAR938HG in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific BAR938HG

Oregon Scientific BAR938HG User Manual - German - 8 pages

Oregon Scientific BAR938HG User Manual - Dutch - 8 pages

Oregon Scientific BAR938HG User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info