Manual Oregon Scientific BAR936HG (page 7 of 15) (English)

589371

Zoom out

Zoom in

1/15

To fold out the stand: To use the wall mount:

For best results:

• Insert the batteries and select the unit, channel, and

radio signal format before you mount the sensor.

• Place the sensor out of direct sunlight and moisture.

• Do not place the sensor more than 70 metres

(230 feet) from the main (indoor) unit.

• Position the sensor so that it faces the main (indoor)

unit, minimizing obstructions such as doors, walls,

and furniture.

• Place the sensor in a location with a clear view to

the sky, away from metallic or electronic objects.

• Position the sensor close to the main unit during cold

winter months as below-freezing temperatures may

affect battery performance and signal transmission.

The transmission range may vary and is subject

to the receiving range of the main unit.

You may need to experiment with various locations to

get the best results.

SENSOR DATA TRANSMISSION

Data is sent from the sensor(s) every 60 Seconds. The

reception icon shown in the Temperature / Humidity Area

indicates the status.

NOTE

SEARCH FOR SENSOR

To search for a Thermo / Hygro sensor, press SELECT

to navigate to the Temperature / Humidity Area.

will

show next to the Area. Then, simultaneously press and

hold MEMORY and CHANNEL for 2 seconds.

To search for the UV sensor, press SELECT to navigate

to the UVI / Barometer Area.

will show next to the

Area. Then, press and hold MEMORY and CHANNEL

for 2 seconds.

If the sensor is still not found, check the

batteries.

ICON DESCRIPTION

Main unit is searching for

sensors.

At least 1 channel has been

found.

Sensor 1 is sending data. (The

number shows which sensor is

selected.)

The selected sensor cannot be

found. Search for the sensor or

check batteries.

--- shows in Temp /

Humidity Area

NOTE

CLOCK AND CALENDAR

This product tracks the time and date based on radio-

controlled signals from the RTGR368N remote sensor,

or manual settings that you enter.

RADIO-CONTROLLED CLOCK

The time and date are automatically updated by radio-

controlled clock signals from official time-keeping

organizations in Frankfurt (Germany) and Rugby

(England) unless you disable this feature. The signals

are collected by the remote sensor (RTGR368N)

whenever it is within 1500 km (932 miles) of a signal.

Initial reception takes 2-10 minutes, and is initiated when

you first set up the unit, and whenever you press RESET.

Once complete, the reception icon will stop blinking.

The

icon shown in the Clock Area indicates

2 factors:

• Connection between the main unit and the sensor

that collects RF signals (

)

• RF signal reception (

)

How these signals work together:

ICON MEANING

The unit has contact with the

sensor and has synchronized

the time.

The unit has contact with the

sensor but the time has not

been synchronized.

The unit has lost contact with

the remote sensor but the time

is synchronized.

The unit has lost contact with

the remote sensor and the time

is not synchronized.

The unit cannot reach the

remote sensor.

To force a manual search for RF clock reception,

press and hold SEARCH on the sensor (RTGR368N)

for 2 seconds.

TURN RADIO-CONTROLLED CLOCK ON / OFF

If you wish to manually set the clock, you must first

disable the radio-controlled feature. To do this, navigate

to the Clock / Alarm Area. Then, press and hold DOWN

on the main unit for 2 seconds. To enable it, navigate to

the Clock / Alarm Area, then press and hold UP for

2 seconds.

NOTE

BAR933HG Eng R4 7/26/04, 9:26 PM6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific BAR936HG in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific BAR936HG

Oregon Scientific BAR936HG User Manual - German - 16 pages

Oregon Scientific BAR936HG User Manual - Dutch - 15 pages

Oregon Scientific BAR936HG User Manual - French - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon Scientific BAR936HG Manual

Product: