589366
7
Zoom out
Zoom in
Previous page
1/11
Next page
7
GB
HOW TO READ
THE RF SIGNAL INDICATOR
The RF signal indicator shows the signal-receiving status of the main unit.
There are three possible forms:
The unit is in searching mode.
Transmission data are securely
registered.
No signals.
REMOTE SENSOR SCANNING
The unit can be set to automatically scan and display readings from the
remote sensors. When the remote-sensor mode is active, the display will
show the readings from one channel for about 4-second and then proceed to
the next channel display.
To activate the remote-sensor scanning mode:
Press and hold CHANNEL for 2-seconds.
To deactivate the remote-sensor scanning mode:
Press any button.
DISCONNECTED SIGNALS
If without obvious reasons the display for a particular channel goes blank,
press[IN/REMOTE] to enforce an immediate search.
If that fails, check:
1. The remote unit of that channel is still in place.
2. The batteries of both the remote unit and main unit. Replace as necessary.
Note that when the temperature falls below freezing point, the batteries
of outdoor units will freeze, lowering their voltage supply and the
effective range.
3. The transmission is within range and path is clear of obstacles and
interference. Shorten the distance when necessary.
TRANSMISSION COLLISION
Signals from other household devices, such as door bells, home security
systems and entry controls, may interfere with those of this product and
cause temporarily reception failure. This is normal and does not affect the
general performance of the product. The transmission and reception of
readings will resume once the interference recedes.
LOW BATTERY WARNING
When it is time to replace batteries, the respective low-battery indicator
will show up when the respective channel is selected. The battery level of
the main unit will be shown on the indoor temperature when it is running
low.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific BAR916HG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific BAR916HG in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific BAR916HG

Oregon Scientific BAR916HG User Manual - German - 31 pages

Oregon Scientific BAR916HG User Manual - Dutch - 29 pages

Oregon Scientific BAR916HG User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info