520304
12
Zoom out
Zoom in
Previous page
1/17
Next page
12
GB
Refer to fig 18 to display such information and fig 18a to clear the
memory.
Note:
please refer to Section 7 for overall erase memory record.
SECTION 7 ADDITIONAL
INFORMATION
This section applies to all models.
KEY LOCK
You may found that the OUTBREAKER is equipped with a key lock
function to avoid any mis-touch of any key during the activities. To
activate the function, simply press and hold SELECT. Press and hold
the SELECT again to release the key lock function.
Refer to fig 19 on the LCD display in various when the key lock
function is activated.
TOUR MODE
The tour mode retains tour memory for the ALTIMETER,
BAROMETER, HEART RATE and BIKE operating modes.
To activate the tour mode, hold MODE and FUNCTION
simultaneously in any of the above operating modes. The tour
number and total memory used will be displayed. Press and hold
FUNCTION to disable or enable the tour function. You can temporary
stop the recording by making rest on one single tour.
Refer to Fig 20 for the operation.
Note:
a) Once the tour function is disable when it is activated again, a new
tour memory will be started instead.
b) Tour memory can only be retreived on the PC with the PC
docking station together with the PC software only.
c) Tour memory cannot be erased by the operation on the watch, it
can be erased through the PC software only.
d) Difference information such as temperature, altitude, heart rate,
wheel speed, cadence, trip distance etc. could be selected being
recorded for the tour through the PC software.
MARKER
The marker function is used to mark a particular position of a tour.
To use the marker, press and hold MARKER when the tour mode is
in place.
Note:
The marker will only be observed in the data on the PC after
download the tour record from the watch.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific ATC108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific ATC108 in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info