520304

Oregon Scientific ATC108 Manual

7
Zoom out
Zoom in
Previous page
1/17
Next page
GB
7
DISPLAY MODES
There are four display modes in ALTIMETER:
• Altitude and clock
• Altitude and local barometric pressure
• Altitude and chronometer
• Altitude and temperature
Refer to fig 8 to change among the displays. Within the four display
modes there are four functions can be recalled:
• Altitude memory
• Altitude alarm
• Climbing speed
• Climbing speed memory
Note:
The chronometer can also be activated under the climbing speed
mode (fig 8a).
HOW TO SET THE CURRENT ALTITUDE
When you first use the OUTBREAKER, you should set the current
altitude – that is the known altitude at the current location. You can
obtain the correct altitude from a topographical map.
Refer to fig 8b to set the reference altitude.
Note:
The altitude could be re-calibrated in another way by input the
sea-level pressure through the PC software. To connect the watch to
the PC software please refer to section 7.
HOW TO SET THE ALTIMETER ALARM
Refer to fig 9 to set the altimeter alarm.
Once the altitude alarm is set, your OUTBREAKER will emit an
alarm when the set altitude is exceeded.
Note:
a) Both ascending and descending altitude alarm is equipped in the
watch.
b) The altitude alarm as far as the duration of the alarm may also set
through the PC software. To connect the watch to the PC
software please refer to Section 7.
MAXIMUM AND ACCUMULATED
ALTITUDE
You may recall the maximum ascending or descending altitude as far
as the total altitude for ascending and descending. You may also
erase this memory record. (fig 10)
Note:
a) please refer to Section 7 for overall erase memory record.
b) This feasture can be applied companied with the PC docking
station. You may set the threshold value of altitude change on the
watch for the total ascending / descending altitude memory
through the PC software. To connect the watch to the PC
software please refer to section 7.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific ATC108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific ATC108 in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info