Manual Oregon 88-023 Blade Grinder (page 15 of 18) (English)

640538

Zoom out

Zoom in

1/18

1414

Grinding the blade (cont.)

12. Do not sharpen the blade with so much pressure as to overheat the blade and turn the

metal blue. This can cause changes in the properties of the metal the blade is made from.

13. After sharpening one cutting edge of the blade hold it from the opposite end. Be careful of

the sharp edge and the possibility that the blade may be hot.

14. Repeat the process used to sharpen the first edge.

15. Turn the power switch off and remove the safety lock pin.

Balancing the blade

1. Check the balance of the blade with a blade balancer such as Oregon® part number 42- 047.

Slide the blade center hole onto the cone until it stops. Keeping your thumbs against the

blade, pull the circular magnet forward until it makes solid contact with the blade. The

magnet should hold the blade firmly.

2. Position the blade parallel with the ground. If the blade turns, dropping one tip, use the

grinder and remove a little material from that cutting edge. Check and repeat the process

until the blade moves very little when placed on the balancer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon 88-023 Blade Grinder in the language / languages: English as an attachment in your email.

The manual is 11,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon 88-023 Blade Grinder Manual

Product: