638866
15
Zoom out
Zoom in
Previous page
1/80
Next page
15
Wall mount
If you prefer to mount the SmartGuide display
unit on a wall, mirror or other surface, use the
adhesive tape (k) to fix the wall mount (j). Before
doing so, make sure the chosen surface is clean
and dry (remove grease and dust first).
Position the wall mount so, that the Oral-B logo is
readable. Then, press the wall mount evenly and
firmly to the wall. Wait 24h before sliding the
SmartGuide display unit into the fixed wall mount.
Please note: The adhesive tape will not work on
dirt-repellent surfaces.
Cleaning recommendations
After brushing, rinse your brush head
thoroughly under running water.
Remove the brush head from the handle and
clean brush head and handle separately under
running water. Wipe them dry before you put
the handle back on the charging unit.
From time to time you can also clean the
charging unit with a damp cloth. For thorough
cleaning you may remove the charger cover (h)
by pushing the release button on top of the
charging unit. The charger cover is dishwasher-
safe.
Charging unit and SmartGuide display unit
should never be placed in water.
Synchronizing
To avoid interference of display messages
when using more than one Oral-B Pulsonic
SmartSeries toothbrushes with separate
SmartGuide display units in the same house-
hold, you need to assign the handles to their
respective SmartGuide display units.
To do so, please follow the steps below:
Push the «h/min» button, located in the
SmartGuide battery compartment, for at least
3 seconds. The SmartGuide display unit
shows «L---», indicating the «Learn» mode
for synchronization is activated.
Now you are requested by a flashing
on/off button in the toothbrush icon on the
SmartGuide display unit to turn the handle on.
When doing so, the automatic synchronization
process starts. It is finished when «L-1-» is
displayed.
Then turn off the handle.
If you would like to assign a second handle to
the same SmartGuide display unit, repeat the
last two steps described above with the other
handle. You can exit the «Learn» mode by
pressing the «h/min» or «set» button. Otherwise
the «Learn» mode will automatically end after
30 seconds.
Please note:
A maximum of 2 handles can be synchronized
with one SmartGuide display unit. After you
synchronized the second handle, «Full» will be
displayed.
When changing batteries of the SmartGuide
display unit, stored data will be erased.
Therefore, please repeat the synchronization
process every time you change the batteries.
set
h/min
3 sec.
96192337_S_32_WE.indd 15 28.01.13 08:48
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oral-B Pulsonic SmartSeries S 32.533.5 - 3746 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oral-B Pulsonic SmartSeries S 32.533.5 - 3746 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info