624937
32
Zoom out
Zoom in
Previous page
1/59
Next page
English
32
USING THE PROJECTOR
BrillianColor
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
Color Temperature (data-mode only) : Select a color temperature from Warm, Medium, or Cool.
Color Temperature : Select a color temperature from D50, D65, D75, D83, D93, and Native.
Color Matching : Select the following options:
Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W) ±
level of the image.
Saturation: Adjust a video image from black and white to fully saturated color. ±
Hue: Adjust the color balance of red and green. ±
Gain: Adjust the image brightness. ±
Reset: Return the factory default settings for color matching. ±
Exit: Exit the “Color Matching” menu. ±
RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an
image.
Reset: Return the factory default settings for RGB gain/bias. ±
Exit: Exit the “RGB Gain/Bias” menu. ±
Color Space (non-HDMI input only) : Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
Color Space (HDMI input only) : select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
RGB Channel: Select from normal, red, green, or blue channels.
White Level: Allow user to adjust White Level when inputting Video signals.
Black Level: Allow user to adjust Black Level when inputting Video signals.
Saturation: Adjust a video image from black and white to fully saturated color.
Hue: Adjust the color balance of red and green.
IRE: Allow user to adjust IRE value when inputting Video signals.
IRE is only available with NTSC video format.Note:
Exit : Exit the “Color Settings” menu.
Signal
Adjust the signal options.
Automatic : Congure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
Frequency : Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to icker vertically.
Phase : Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or ickers, use this function to correct it.
H. Position : Adjust the horizontal positioning of the image.
V. Position : Adjust the vertical positioning of the image.
Exit : Exit the “Signal” menu.
Brightness Mode (Lamp base data)
Adjust the brightness mode settings for lamp-based projectors.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma W330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma W330 in the language / languages: English as an attachment in your email.

The manual is 11,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Optoma W330

Optoma W330 User Manual - German - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info