700299
8
Zoom out
Zoom in
Previous page
1/99
Next page
User manual
DLP
®
Projector
English
2
TABLE OF CONTENTS
SAFETY ............................................................................................... 4
Important Safety Instruction....................................................................................................... 4
3D Safety Information ................................................................................................................ 5
Copyright ................................................................................................................................... 6
Disclaimer .................................................................................................................................. 6
Trademark Recognition ............................................................................................................. 6
FCC ........................................................................................................................................... 7
Declaration of Conformity for EU countries ............................................................................... 7
WEEE ........................................................................................................................................ 7
INTRODUCTION .................................................................................. 8
Package Overview..................................................................................................................... 8
Standard accessories ................................................................................................................ 8
Optional accessories ................................................................................................................. 8
Product Overview ...................................................................................................................... 9
Connections.............................................................................................................................. 10
Keypad ..................................................................................................................................... 13
Remote control 1 ...................................................................................................................... 14
Remote control 2 ...................................................................................................................... 15
Remote control 3 ...................................................................................................................... 16
Remote control 4 ...................................................................................................................... 17
SETUP AND INSTALLATION ............................................................. 18
Installing the projector .............................................................................................................. 18
Adjusting the projector image ................................................................................................... 28
USING THE PROJECTOR .................................................................. 31
Powering on / off the projector.................................................................................................. 31
Selecting an input source ......................................................................................................... 32
Menu navigation and features .................................................................................................. 33
OSD Menu tree (WUXGA and 1080P models) ......................................................................... 35
OSD Menu tree (SVGA, XGA, and WXGA models) ................................................................. 44
Display image settings menu.................................................................................................... 51
Display 3D menu ...................................................................................................................... 54
Display aspect ratio menu ........................................................................................................ 54
Display edge mask menu ......................................................................................................... 61
Display zoom menu .................................................................................................................. 61
Display image shift menu ......................................................................................................... 61
Display keystone menu ............................................................................................................ 61
Audio mute menu ..................................................................................................................... 61
Audio volume menu .................................................................................................................. 61
Setup projection menu.............................................................................................................. 62
Setup screen type menu........................................................................................................... 62
English
3
Setup lamp settings menu ........................................................................................................ 62
Setup lter settings menu ......................................................................................................... 62
Setup power settings menu ...................................................................................................... 62
Setup security menu ................................................................................................................. 63
Setup HDMI link settings menu ................................................................................................ 64
Setup test pattern menu ........................................................................................................... 64
Setup remote settings menu..................................................................................................... 64
Setup projector ID menu........................................................................................................... 65
Setup options menu.................................................................................................................. 65
Setup reset menu ..................................................................................................................... 66
Network LAN menu .................................................................................................................. 66
Network control menu............................................................................................................... 67
Setup network control settings menu ....................................................................................... 68
Info menu.................................................................................................................................. 73
MAINTENANCE .................................................................................. 74
Replacing the lamp ................................................................................................................... 74
Installing and cleaning the dust lter ........................................................................................ 76
ADDITIONAL INFORMATION ............................................................ 77
Compatible resolutions ............................................................................................................. 77
Image size and projection distance .......................................................................................... 80
Projector dimensions and ceiling mount installation ................................................................. 84
IR remote control 1 codes ........................................................................................................ 85
IR remote control 2 codes ........................................................................................................ 87
IR remote control 3 codes ........................................................................................................ 89
IR remote control 4 codes ........................................................................................................ 91
Troubleshooting ........................................................................................................................ 93
Warning indicators .................................................................................................................... 95
Specications ........................................................................................................................... 97
Optoma global ofces ............................................................................................................... 98
English
4
SAFETY
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Please follow all warnings, precautions and maintenance as recommended in this user's guide.
Important Safety Instruction
Do not stare into the beam, RG2.
As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015.
Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from
over heating, it is recommended to install the projector in a location that does not block ventilation.
As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the
projector in an enclosure such as a book case or a cabinet that restricts air ow.
To reduce the risk of re and/or electric shock, do not expose the projector to rain or moisture. Do not
install near heat sources such as radiators, heaters, stoves or any other apparatus such as ampliers
that emits heat.
Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short
out parts that could result in re or electric shock.
Do not use under the following conditions:
± In extremely hot, cold or humid environments.
(i) Ensure that the ambient room temperature is within 5°C ~ 40°C
(ii) Relative humidity is 10% ~ 85%
± In areas susceptible to excessive dust and dirt.
± Near any appliance generating a strong magnetic eld.
± In direct sunlight.
Do not use the projector in places where ammable gases or explosives gases may be present in the
atmosphere. The lamp inside the projector becomes very hot during operation and the gases may
ignite and result in a re.
Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be
(but not limited to):
± Unit has been dropped.
± Power supply cord or plug has been damaged.
± Liquid has been spilled on to the projector.
± Projector has been exposed to rain or moisture.
± Something has fallen in the projector or something is loose inside.
Do not place the projector on an unstable surface. The projector may fall over resulting in injury or the
projector may become damaged.
Do not block the light coming out of the projector lens when in operation. The light will heat the object
and could melt, cause burns or start a re.
English
5
Please do not open or disassemble the projector as this may cause electric shock.
Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous
voltages or other hazards. Please call Optoma before you send the unit for repair.
See projector enclosure for safety related markings.
The unit should only be repaired by appropriate service personnel.
Only use attachments/accessories specied by the manufacturer.
Do not look into straight into the projector lens during operation. The bright light may harm your eyes.
When replacing the lamp, please allow the unit to cool down. Follow instructions as described on
pages 74-75.
This projector will detect the life of the lamp itself. Please be sure to change the lamp when it shows
warning messages.
Reset the "Lamp Reset" function from the on-screen display "Setup lamp settings" menu after
replacing the lamp module.
When switching the projector off, please ensure the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the projector to cool down.
When the lamp is approaching to the end of its life time, the message "Lamp life exceeded." will show
on the screen. Please contact your local reseller or service center to change the lamp as soon as
possible.
Turn off and unplug the power plug from the AC outlet before cleaning the product.
Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners,
waxes or solvents to clean the unit.
Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Note: When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been
replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section on pages
74-75.
Do not setup the projector in places where it might be subjected to vibration or shock.
Do not touch the lens with bare hands
Remove battery/batteries from remote control before storage. If the battery/batteries are left in the
remote for long periods, they may leak.
Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it
can adversely affect the quality of the projector performance.
Please follow the correct projector orientation installation as non standard installation may affect the
projector performance.
Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.
3D Safety Information
Please follow all warnings and precautions as recommended before you or your child use the 3D function.
Warning
Children and teenagers may be more susceptible to health issues associated with viewing in 3D and should be
closely supervised when viewing these images.
Photosensitive Seizure Warning and Other Health Risks
Some viewers may experience an epileptic seizure or stroke when exposed to certain ashing images
or lights contained in certain Projector pictures or video games. If you suffer from, or have a family
history of epilepsy or strokes, please consult with a medical specialist before using the 3D function.
Even those without a personal or family history of epilepsy or stroke may have an undiagnosed
condition that can cause photosensitive epileptic seizures.
Pregnant women, the elderly, sufferers of serious medical conditions, those who are sleep deprived or
under the inuence of alcohol should avoid utilizing the unit’s 3D functionality.
English
6
If you experience any of the following symptoms, stop viewing 3D pictures immediately and consult a
medical specialist: (1) altered vision; (2) light-headedness; (3) dizziness; (4) involuntary movements
such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of awareness; (8) convulsions;
(9) cramps; and/ or (10) disorientation. Children and teenagers may be more likely than adults
to experience these symptoms. Parents should monitor their children and ask whether they are
experiencing these symptoms.
Watching 3D projection may also cause motion sickness, perceptual after effects, disorientation, eye
strain and decreased postural stability. It is recommended that users take frequent breaks to lessen
the potential of these effects. If your eyes show signs of fatigue or dryness or if you have any of the
above symptoms, immediately discontinue use of this device and do not resume using it for at least
thirty minutes after the symptoms have subsided.
Watching 3D projection while sitting too close to the screen for an extended period of time may
damage your eyesight. The ideal viewing distance should be at least three times the screen height. It
is recommended that the viewers eyes are level with the screen.
Watching 3D projection while wearing 3D glasses for an extended period of time may cause a
headache or fatigue. If you experience a headache, fatigue or dizziness, stop viewing the 3D
projection and rest.
Do not use the 3D glasses for any other purpose than for watching 3D projection.
Wearing the 3D glasses for any other purpose (as general spectacles, sunglasses, protective goggles,
etc.) may be physically harmful to you and may weaken your eyesight.
Viewing in 3D projection may cause disorientation for some viewers. Accordingly, DO NOT place your
3D PROJECTOR near open stairwells, cables, balconies, or other objects that can be tripped over, run
into, knocked down, broken or fallen over.
Copyright
This publication, including all photographs, illustrations and software, is protected under international copyright
laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced
without written consent of the author.
© Copyright 2018
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no representations
or warranties with respect to the contents hereof and specically disclaims any implied warranties of
merchantability or tness for any particular purpose. The manufacturer reserves the right to revise this publication
and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any
person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pending
applications in other countries throughout the world.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
DLP
®
, DLP Link and the DLP logo are registered trademarks of Texas Instruments and BrilliantColor
TM
is a
trademark of Texas Instruments.
All other product names used in this manual are the properties of their respective owners and are
Acknowledged.
DARBEE is a trademark by Darbee Products, Inc.
MHL, Mobile High-Denition Link and the MHL Logo are trademarks or registered trademarks of MHL Licensing,
LLC.
English
7
FCC
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can be determined by turning the device off and on is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC
regulations.
Caution
Changes or modications not expressly approved by the manufacturer could void the user's authority, which is
granted by the Federal Communications Commission, to operate this projector.
Operation Conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l'intention des utilisateurs canadiens
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Declaration of Conformity for EU countries
EMC Directive 2014/30/EC (including amendments)
Low Voltage Directive 2014/35/EC
R & TTE Directive 1999/5/EC (if product has RF function)
WEEE
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure
utmost protection of the global environment, please recycle it.
English
8
INTRODUCTION
Package Overview
Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items
under optional accessories may not be available depending on the model, specication and your region of
purchase. Please check with your place of purchase. Some accessories may vary from region to region.
The warranty card is only supplied in some specic regions. Please consult your dealer for detailed information.
Standard accessories
Carry bag
Optional accessories
Note: Optional accessories vary depending on model, specication and region.
Projector Power lead
Documentation

CD User Manual *(1)

Warranty Card *(2)

Basic User Manual
VGA cable
Note:
The remote control is shipped with the battery.
*(1) For European User Manual please visit www.optomaeurope.com.
*(2) For European warranty information please visit www.optomaeurope.com.
*(3) The actual remote control may vary depending on the region.
Remote control *(3)
Lens cap
English
9
INTRODUCTION
Product Overview
5
11
13
12
1 2
3
6
7 8 9
10
5
4
Note: Keep a minimum distance of 20 cm between the “inlet” and “outlet” labels.
No Item No Item
1. Lens 8. Zoom Lever
2.
IR Receiver
9.
Lamp Cover
3. Keypad 10. Ventilation (outlet)
4. Lens Cap 11. Kensington
TM
Lock Port
5. Tilt-Adjustment Foot 12. Power Socket
6. Focus Ring 13. Input / Output
7. Ventilation (inlet)
English
10
INTRODUCTION
Connections
WUXGA_1080P (Type 1 (8 IO))
5
4
31 72 6
10
9
11
WUXGA_1080P (Type 2 (9 IO))
5
4
31 72 6
10
9
8
11
No Item Type 1 (8 IO) Type 2 (9 IO)
1. HDMI 1 / MHL Connector
2.
HDMI 2 Connector
3. USB Power Out (5V 1.5A) Connector / MOUSE / SERVICE Connector
4. VGA Connector
5. Video Connector
6. AUDIO OUT Connector
7. AUDIO IN Connector
8. RJ-45 Connector N/A
9. RS-232 Connector
10. Kensington
TM
Lock Port
11. Power Socket
Note: ” means the item is supported, “N/A” means the item is not available.
Note:
Remote mouse requires special remote control.
The I/Os depend on the projector you purchased, please check the physical product for reference.
English
11
INTRODUCTION
SVGA_XGA_WXGA (Type 3 (3 IO))
0
4
32
10
8
SVGA_XGA_WXGA (Type 4 (6 IO))
0
5
4
31 2
6
10
8
SVGA_XGA_WXGA (Type 5 (8 IO))
0
5
4
31 2
7 6
10
9 8
English
12
INTRODUCTION
No Item Type 3 (3 IO) Type 4 (6 IO) Type 5 (8 IO)
1. HDMI Connector N/A
2.
USB Power Out (5V 1A) Connector / MOUSE /
SERVICE Connector
3. VGA IN Connector
4. VIDEO Connector
5. AUDIO IN Connector N/A
6. AUDIO OUT Connector N/A
7. VGA OUT Connector N/A N/A
8. Kensington
TM
Lock Port
9. RS232 Connector N/A N/A
10. Power Socket
Note: ” means the item is supported, “N/A” means the item is not available.
Note:
Remote mouse requires special remote control.
The I/Os depend on the projector you purchased, please check the physical product for reference.
English
13
INTRODUCTION
Keypad
1
2
3
6
5
4
9 8
12
11
9
7
10
No Item No Item
1. On/Standby LED 7. IR Receiver
2.
Lamp LED
8.
Enter
3. Temp LED 9. Keystone Correction
4. Information 10. Menu
5. Re-Sync 11. Source
6. Four Directional Select Keys 12 Power
English
14
INTRODUCTION
Remote control 1
4
1
3
5
6
8
7
9
2
2
15
18
17
16
4
14
13
12
11
10
No Item No Item
1. Power On / Off 10. IR LED Indicator
2.
Keystone + / - 11. Freeze
3. AV Mute 12. Aspect Ratio
4. Volume - / + 13. Mute
5. Enter 14. Four Directional Select Keys
6. Menu 15. 3D
7. HDMI 16. Video
8. VGA 17. Resync
9. Source 18. Brightness Mode
Note:
The actual remote control may vary depending on the region.
Some keys may have no function for models that do not support these features.
Before using the remote control for the rst time, remove the transparent insulation tape. See page
29 for battery installation.
3
V
O
L
T
S
CR2025
English
15
INTRODUCTION
Remote control 2
Freeze
Power Switch
L
R
Keystone Volume
Page
-
-
+
-
+
1 2
Menu
3
3D
4
HDMI
5
VGA
6
Video
7
User1
8
User2
9
User3
Source
0
Resync
Page+Mode
Enter
4
1
2
3
5
6
13
10
8
7
9
11
12
14
15
27
20
16
17
18
22
23
24
21
26
19
25
No Item No Item
1. Power On / Off 15. Brightness Mode
2.
Freeze 16. Mouse On / Off
3. Display Blank / Audio Mute 17. Mute
4. Mouse Left Click 18. Mouse Right Click
5. Enter 19. Four Directional Select Keys
6. Mode 20. Page +
7. Page - 21. Volume - / +
8. Keystone - / + 22. 3D Menu On / Off
9. Menu 23. VGA
10. Aspect Ratio 24. Video
11. HDMI 25. User 3
12. User 2 26. Numeric Keypad (0-9)
13. User 1 27. Resync
14. Source
Note:
The actual remote control may vary depending on the region.
Some keys may have no function for models that do not support these features.
English
16
INTRODUCTION
Remote control 3
ON
OFF
Menu
VGA1
HDMI1
User2
Contrast
Aspect ratio
DB
Volume
Source
Re-sync
User1
Brightness
Keystone
Mute
User3
Mode
3D
Sleep Timer
Volume
HDMI2
VGA2 Video YPbPr
1
3
2
4
5
6
7
8
11
12
13
14
15
16
17
18
19
20
21
23
22
24
25
27
26
9
10
No Item No Item
1. Power On 15. User 3
2.
User 2 16. Contrast
3. User 1 17. Display Mode
4. Brightness 18. Aspect Ratio
5. Keystone 19. 3D Menu On / Off
6. Mute 20. Sleep Timer
7. DB (Dynamic Black) 21. Volume +
8. Source 22. Re-Sync
9. Enter 23. Four Directional Select Keys
10. Menu 24. Volume -
11. HDMI1 25. HDMI2
12. VGA1 (not supported) 26. YPbPr (not supported)
13. VGA2 (not supported) 27. Video (not supported)
14. Power Off
Note:
The actual remote control may vary depending on the region.
Some keys may have no function for models that do not support these features.
English
17
INTRODUCTION
Remote control 4
Freeze
Power Switch
L
R
V Keystone Volume
Page+
-
+
-
+
1 2
Menu
3
3D
4
HDMI
5
VGA
6
Video
7
User1
8
User2
9
User3
Source
0
Resync
Page
-
Laser
Enter
4
1
2
3
5
6
13
10
8
7
9
11
12
14
15
27
20
16
17
18
22
23
24
21
26
19
25
No Item No Item
1. Power On / Off 15. Brightness Mode
2.
Freeze 16. Mouse On / Off
3. Display Blank / Audio Mute 17. Mute
4. Mouse Left Click 18. Mouse Right Click
5. Enter 19. Four Directional Select Keys
6. Laser 20. Page -
7. Page + 21. Volume - / +
8. V Keystone - / + 22. 3D Menu On / Off
9. Menu 23. VGA
10. Aspect Ratio 24. Video
11. HDMI 25. User 3
12. User 2 26. Numeric Keypad (0-9)
13. User 1 27. Resync
14. Source
Note:
The actual remote control may vary depending on the region.
Some keys may have no function for models that do not support these features.
English
18
SETUP AND INSTALLATION
Installing the projector
Your projector is designed to be installed in one of four possible positions.
Your room layout or personal preference will dictate which installation location you select. Take into consideration
the size and position of your screen, the location of a suitable power outlet, as well as the location and distance
between the projector and the rest of your equipment.
Table mount front Ceiling mount front
Table mount rear Ceiling mount rear
Projector should be placed at on a surface and 90 degrees / perpendicular to the screen.
How to determine projector location for a given screen size, please refer to distance table on pages
79-83.
How to determine screen size for a given distance, please refer to distance table on pages 79-83.
Note: The further away the projector is placed from the screen the projected image size increases and vertical
offset also increases proportionally.
IMPORTANT!
Do not operate the projector in any orientation other that table top or ceiling mount. The projector should
be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate
the warranty and may shorten the lifetime of the projector lamp or the projector itself. For none standard
installation advise please contact Optoma.
English
19
SETUP AND INSTALLATION
Projector installation notice (WUXGA_1080P)
Place the projector in a horizontal position.
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed
in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically,
and may lead to other unpredictable damages.
15°
-15°
Allow at least 30 cm clearance around the exhaust vent.
Minimum 100mm
(3.94 inches)
Minimum 300mm
(11.81 inches)
Minimum 300mm
(11.81 inches)
Minimum 100mm
(3.94 inches)
Minimum 100mm
(3.94 inches)
Minimum 100mm
(3.94 inches)
Ensure that the intake vents do not recycle hot air from the exhaust vent.
When operating the projector in an enclosed space, ensure that the surrounding air temperature within
the enclosure does not exceed operation temperature while the projector is running, and the air intake
and exhaust vents are unobstructed.
All enclosures should pass a certied thermal evaluation to ensure that the projector does not recycle
exhaust air, as this may cause the device to shutdown even if the enclosure temperature is with the
acceptable operation temperature range.
English
20
SETUP AND INSTALLATION
Projector installation notice (SVGA_XGA_WXGA)
Place the projector in a horizontal position.
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed
in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically,
and may lead to other unpredictable damages.
15°
-15°
Allow at least 30 cm clearance around the exhaust vent.
Minimum 500mm
(19.69 inches)
Minimum 500mm
(19.69 inches)
Minimum 500mm
(19.69 inches)
Minimum 100mm
(3.94 inches)
Minimum 500mm
(19.69 inches)
Minimum 300mm
(11.81 inches)
Ensure that the intake vents do not recycle hot air from the exhaust vent.
When operating the projector in an enclosed space, ensure that the surrounding air temperature within
the enclosure does not exceed operation temperature while the projector is running, and the air intake
and exhaust vents are unobstructed.
All enclosures should pass a certied thermal evaluation to ensure that the projector does not recycle
exhaust air, as this may cause the device to shutdown even if the enclosure temperature is with the
acceptable operation temperature range.
English
21
SETUP AND INSTALLATION
WUXGA_1080P (Type 1 (8 IO))
MOLEX
MOLEX
1
7
2 3
13
10
4
6
12
5
9
11
English
22
SETUP AND INSTALLATION
WUXGA_1080P (Type 2 (9 IO))
MOLEX
MOLEX
1
7
2 3
10
4
6
12
5
8
11
9
13
English
23
SETUP AND INSTALLATION
No Item Type 1 (8 IO) Type 2 (9 IO)
1. MHL Cable
2.
HDMI Cable
3. VGA In Cable
4. RCA Component Cable
5. Video Cable
6. Audio In Cable
7. Audio Out Cable
8. RJ-45 Cable N/A
9. USB Cable (mouse control)
10. RS232 Cable
11. USB Power Cable
12. HDMI Stick
13. Power Cord
Note: ” means the item is supported, “N/A” means the item is not available.
English
24
SETUP AND INSTALLATION
SVGA_XGA_WXGA (Type 3 (3 IO))
MOLEX
MOLEX
4
5
12
10
6
English
25
SETUP AND INSTALLATION
SVGA_XGA_WXGA (Type 4 (6 IO))
MOLEX
MOLEX
1
8
2
3
4
7
6
5
12
10
English
26
SETUP AND INSTALLATION
SVGA_XGA_WXGA (Type 5 (8 IO))
MOLEX
MOLEX
1
8
2
3
11
4
7
6
5
9
12
10
English
27
SETUP AND INSTALLATION
No Item Type 3 (3 IO) Type 4 (6 IO) Type 5 (8 IO)
1. HDMI Cable N/A
2.
HDMI Stick
N/A
3. USB Power Cable N/A
4. VGA In Cable
5. RCA Component Cable
6. Video Cable
7. Audio In Cable N/A
8. Audio Out Cable N/A
9. VGA out Cable N/A N/A
10. USB Cable (mouse control)
11. RS232 Cable N/A N/A
12. Power Cord
Note: ” means the item is supported, “N/A” means the item is not available.
English
28
SETUP AND INSTALLATION
Adjusting the projector image
Image height
The projector is equipped with elevator feet for adjusting the image height.
1. Locate the adjustable foot you wish to adjust on the underside of the projector.
2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Zoom and focus
To adjust the image size, turn the zoom lever clockwise or counterclockwise to increase or decrease
the projected image size.
To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and
legible.
Focus Ring
Zoom Lever
Note: The projector will focus at a distance of 1m to 10m (WUXGA and 1080P models) or 1m to 12m (SVGA,
XGA, and WXGA models).
English
29
SETUP AND INSTALLATION
Installing / replacing the batteries
1. Press rmly and slide the battery cover off.
M
n
O
2
-
L
i
C
E
L
L
3
V
O
L
T
S
J
A
P
A
N
H
CR2025
2. Install new battery into the compartment. Remove the old battery and
install new one (CR2025). Ensure that the side with a “+” is facing
up.
3
V
O
L
T
S
CR2025
3. Put the cover back.
M
3
V
O
L
T
S
CR2025
CAUTION: To ensure safe operation, please observe the following precautions:
Use CR2025 type battery.
Avoid contact with water or liquid.
Do not expose the remote control to moisture or heat.
Do not drop the remote control.
If the battery has leaked in the remote control, carefully wipe the case clean and install new battery.
Risk of an explosion if battery is replaced by an incorrect type.
Dispose of used battery according to the instructions.
English
30
SETUP AND INSTALLATION
Effective range
Infra-Red (IR) remote control sensor is located on top of the projector. Ensure to hold the remote control at an
angle within 30 degrees perpendicular to the projector’s top IR remote control sensor to function correctly. The
distance between the remote control and the sensor should not be longer than 6 meters (~ 20 feet).
Note: When pointing the remote control directly (0 degrees angle) on the IR sensor, the distance between the
remote control and the sensor should not be longer than 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor on the projector
that might obstruct the infra-red beam.
Make sure the IR transmitter of the remote control is not being shined by sunlight or uorescent lamps
directly.
Please keep the remote controller away from uorescent lamps for over 2 meters or the remote
controller might become malfunction.
If the remote control is close to Inverter-Type uorescent lamps, it might become ineffective from time
to time.
If the remote control and the projector are within a very short distance, the remote control might
become ineffective.
When you aim at the screen, the effective distance is less than 6 meters from the remote control to the
screen and reecting the IR beams back to the projector. However, the effective range might change
according to screens.
Approx. ± 15°
English
31
USING THE PROJECTOR
Powering on / off the projector
or
Powering on
1. Securely connect the power lead and signal/source cable. When connected, the On/Standby LED will
turn red.
2. Turn on the projector by pressing the " " either on the projector keypad or the remote control.
3. A start up screen will display in approximately 10 seconds and the On/Standby LED will be ashing
green or ashing blue.
Note: The rst time the projector is turned on, you will be prompted to select the preferred language, projection
orientation, and other settings.
Powering off
1. Turn off the projector by pressing the " " either on the projector keypad or the remote control.
2. The following message will be displayed:
Power Off
Power Off?
Press power key again.
3. Press the " " again to conrm, otherwise the message will disappear after 15 seconds. When you
press the " " button for the second time, the projector will shut down.
4. The cooling fans will continue to operate for about 10 seconds for the cooling cycle and the On/
Standby LED will ash green or ash blue. When the On/Standby LED turns solid red, this indicates
the projector has entered standby mode. If you wish to turn the projector back on, you must wait until
the cooling cycle has nished and the projector has entered standby mode. When the projector is in
standby mode, simply press the " " button again to turn on the projector.
5. Disconnect the power lead from the electrical outlet and the projector.
Note: It is not recommended that the projector is turned on immediately, right after a power off procedure.
English
32
USING THE PROJECTOR
Selecting an input source
Turn on the connected source that you want to display on the screen, such as computer, notebook, video player,
etc. The projector will automatically detect the source. If multiple sources are connected, push the source button on
the projector keypad or the remote control to select the desired input.
or
English
33
USING THE PROJECTOR
Menu navigation and features
The projector has multilingual on-screen display menus that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect the source.
1. To open the OSD menu, press on the remote control or the projector keyboard.
2. When OSD is displayed, use keys to select any item in the main menu. While making a selection
on a particular page, press or key to enter sub menu.
3. Use keys to select the desired item in the sub menu and then press or key to view further
settings. Adjust the settings by using keys.
4. Select the next item to be adjusted in the sub menu and adjust as described above.
5. Press the or to conrm, and the screen will return to the main menu.
6. To exit, press the or again. The OSD menu will close and the projector will automatically save
the new settings.
WUXGA and 1080P Models
Sub Menu
Main Menu
Settings
Navigation guide
Display
Image Settings
3D
Aspect Ratio
Edge Mask
Zoom
Image Shift
Keystone
Select Exit Enter
English
34
USING THE PROJECTOR
SVGA, XGA, and WXGA Models
Sub Menu
Main Menu
Settings
Navigation guide
Display
Image Settings
3D
Aspect Ratio
Edge Mask
Zoom
Image Shift
Keystone
Select Exit Enter
English
35
USING THE PROJECTOR
OSD Menu tree (WUXGA and 1080P models)
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Display Image Settings
Display Mode [Data]
Presentation
Bright
Cinema
Game
sRGB
DICOM SIM.
User
3D
Wall Color
Off [Default]
Blackboard
Light Yellow
Light Green
Light Blue
Pink
Gray
Brightness -50~50
Contrast
-50~50
Sharpness 1~15
Color -50~50
Tint -50~50
Gamma
Film
Video
Graphics
Standard(2.2)
1.8
2.0
2.4
Color Settings
BrilliantColor
TM
1~10
Color
Temperature
[Data mode]
Warm
Medium
Cool
Color Matching
Color
R [Default]
G
B
C
Y
M
W
Hue -50~50 [Default: 0]
Saturation -50~50 [Default: 0]
Gain -50~50 [Default: 0]
English
36
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Display Image Settings
Color Settings
Color Matching
Reset
Cancel [Default]
Yes
Exit
RGB Gain/Bias
Red Gain -50~50
Green Gain -50~50
Blue Gain -50~50
Red Bias -50~50
Green Bias -50~50
Blue Bias -50~50
Reset
Cancel [Default]
Yes
Exit
Color Space [Not
HDMI Input]
Auto [Default]
RGB
YUV
Color Space
[HDMI Input]
Auto [Default]
RGB(0~255)
RGB(16~235)
YUV
White Level 0~31 (depends on signal)
Black Level -5~5 (depends on signal)
IRE
0
7.5
Signal
Automatic
Off
On [Default]
Frequency
-10~10 (depends on signal)
[Default: 0]
Phase 0~31 (depends on signal) [Default: 0]
H. Position -5~5 (depends on signal) [Default: 0]
V. Position -5~5 (depends on signal) [Default: 0]
Exit
Brightness Mode [Lamp Base - Data]
Bright
Eco.
Dynamic
Eco+
Reset
English
37
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Display
3D
3D Mode
Off
DLP-Link [Default]
IR
3D->2D
3D [Default]
L
R
3D Format
Auto [Default]
SBS
Top and Bottom
Frame Sequential
3D sync invert
On
Off [Default]
Aspect Ratio
4:3
16:9
16:10 [WUXGA model]
LBX
Native
Auto
Edge Mask 0~10 [Default: 0]
Zoom -5~25 [Default: 0]
Image shift
H
-50~50 [Default: 0]
V
-50~50 [Default: 0]
Keystone -40~40
Audio
Mute
Off [Default]
On
Volume 0-10 [Default: 5]
Setup
Projection
Front [Default]
Rear
Ceiling-top
Rear-top
Screen Type [WUXGA model]
16:9
16:10 [Default]
Lamp Settings
Lamp Reminder
Off
On [Default]
Lamp Reset
Cancel [Default]
Yes
English
38
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup
Filter Settings
Optional Filter
Installed
Yes
No
Filter Usage
Hours
(Read only)
Filter Reminder
Off
300hr
500hr [Default]
800hr
1000hr
Filter Reset
Cancel [Default]
Yes
Power Settings
Direct Power On
Off [Default]
On
Signal Power On
Off [Default]
On
Auto Power Off
(min)
0~180 (5 min increments)
[Default: 20]
Sleep Timer
(min)
0~990 (30 min increments)
[Default: 0]
Always On
No [Default]
Yes
Quick Resume
Off [Default]
On
Power Mode
(Standby)
Active
Eco [Default]
USB Power
Off
On
Auto [Default]
Security
Security
Off
On
Security Timer
Month
Day
Hour
Change
Password
HDMI Link
Settings
HDMI Link
Off
On
Inclusive of TV
No
Yes
Power On Link
Mutual
PJ --> Device
Device --> PJ
Power Off Link
Off
On
English
39
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup
Test Pattern
Green Grid
Magenta Grid
White Grid
White
Off
Remote
Settings
[depends on
remote]
IR Function
On
Off
User1
HDMI 2
Test Pattern
LAN (Type 2 (9 IO) only)
Brightness
Contrast
Sleep Timer [Default]
Color Matching
Color Temp
Gamma
Projection
Lamp Settings
Zoom
Freeze
MHL
User2
HDMI 2
Test Pattern
LAN (Type 2 (9 IO) only)
Brightness
Contrast
Sleep Timer
Color Matching [Default]
Color Temp
Gamma
Projection
Lamp Settings
Zoom
Freeze
MHL
English
40
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup
Remote
Settings
[depends on
remote]
User3
HDMI 2
Test Pattern
LAN (Type 2 (9 IO) only)
Brightness
Contrast
Sleep Timer
Color Matching
Color Temp [Default]
Gamma
Projection
Lamp Settings
Zoom
Freeze
MHL
Projector ID 0~99
Options Language
English [Default]
Deutsch
Français
Italiano
Español
Português
Polski
Nederlands
Svenska
Norsk/Dansk
Suomi
ελληνικά
繁體中文
简体中文
日本
한국어
Русский
Magyar
Čeština
ไทย
Türkçe
Tiếng Việt
Bahasa Indonesia
Română
Slovenčina
English
41
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup Options
Closed
Captioning
CC1
CC2
Off [Default]
Menu Settings
Menu Location
Top left
Top right
Center [Default]
Bottom left
Bottom right
Menu Timer
Off
5sec
10sec [Default]
Auto Source
Off [Default]
On
Input Source
HDMI1/MHL
HDMI2
VGA
Video
Input Name
HDMI1/MHL
Default [Default]
Custom
HDMI2
Default [Default]
Custom
VGA
Default [Default]
Custom
Video
Default [Default]
Custom
High Altitude
Off [Default]
On
Display Mode
Lock
Off [Default]
On
Keypad Lock
Off [Default]
On
Information Hide
Off [Default]
On
Logo
Default [Default]
Neutral
English
42
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup
Options
Background
Color
None [Default: for Video/Pro-AV]
Blue [Default for Data model]
Red
Green
Grey
Logo
Reset
Reset OSD
Cancel [Default]
Yes
Reset to Default
Cancel [Default]
Yes
Network
(Type 2
(9 IO)
only)
LAN
Network Status (read only)
MAC Address (read only)
DHCP
Off [Default]
On
IP Address 192.168.0.100 [Default]
Subnet Mask
255.255.255.0 [Default]
Gateway 192.168.0.254 [Default]
DNS 192.168.0.51 [Default]
Reset
Control
Crestron
Off
On [Default]
Note: Port 41794.
Extron
Off
On [Default]
Note: Port 2023.
PJ Link
Off
On [Default]
Note: Port 4352
AMX Device
Discovery
Off
On [Default]
Note: Port 9131
Telnet
Off
On [Default]
Note: Port 23
HTTP
Off
On [Default]
Note: Port 80
English
43
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Information
Regulatory
Serial Number
Source
Resolution 00x00
Refresh Rate 0.00Hz
Display Mode
Power mode
(Standby)
Lamp Hours
Bright 0 hr
Eco. 0 hr
Dynamic 0 hr
Eco+ 0 hr
Total
Network Status
IP Address
Projector ID 00~99
Filter Usage
Hours
Brightness
Mode
FW Version
System
LAN
MCU
Note:
The “Lamp Reset” in OSD will only reset both Lamp Hours in OSD and Lamp Hours in service mode.
The Projection Hours in service mode will not be reset.
Each display mode can be adjusted and saved the value.
In 3D timing mode, the zoom/edge mask will be disabled to prevent from image break.
The available menu options vary depending on the model type.
English
44
USING THE PROJECTOR
OSD Menu tree (SVGA, XGA, and WXGA models)
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Display Image Settings
Display Mode [Data]
Presentation
Bright
Cinema
Game
sRGB
DICOM SIM.
User
3D
Wall Color
Off [Default]
Blackboard
Light Yellow
Light Green
Light Blue
Pink
Gray
Brightness -50~50
Contrast
-50~50
Sharpness 1~15
Color -50~50
Tint -50~50
Gamma
Film
Video
Graphics
Standard(2.2)
1.8
2.0
2.4
Color Settings
BrilliantColor
TM
1~10
Color
Temperature
[Data mode]
Warm
Medium
Cool
Color Matching
Color
R [Default]
G
B
C
Y
M
W
Hue -50~50 [Default: 0]
Saturation -50~50 [Default: 0]
Gain -50~50 [Default: 0]
English
45
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Display Image Settings
Color Settings
Color Matching
Reset
Cancel [Default]
Yes
Exit
RGB Gain/Bias
Red Gain -50~50
Green Gain -50~50
Blue Gain -50~50
Red Bias -50~50
Green Bias -50~50
Blue Bias -50~50
Reset
Cancel [Default]
Yes
Exit
Color Space [Not
HDMI Input]
Auto [Default]
RGB
YUV
Color Space
[HDMI Input]
Auto [Default]
RGB(0~255)
RGB(16~235)
YUV
White Level 0~31 (depends on signal)
Black Level -5~5 (depends on signal)
IRE
0
7.5
Signal
Automatic
Off
On [Default]
Frequency
-10~10 (depends on signal)
[Default: 0]
Phase 0~31 (depends on signal) [Default: 0]
H. Position -5~5 (depends on signal) [Default: 0]
V. Position -5~5 (depends on signal) [Default: 0]
Exit
Brightness Mode [Lamp Base - Data]
Bright
Eco.
Dynamic
Eco+
Reset
English
46
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Display
3D
3D Mode
Off
DLP-Link [Default]
IR
3D->2D
3D [Default]
L
R
3D Format
Auto [Default]
SBS
Top and Bottom
Frame Sequential
3D sync invert
On
Off [Default]
Aspect Ratio
4:3
16:9
16:10 [WXGA model]
LBX [except SVGA and XGA
models]
Native
Auto
Edge Mask 0~10 [Default: 0]
Zoom -5~25 [Default: 0]
Image shift
H
-50~50 [Default: 0]
V
-50~50 [Default: 0]
Keystone -40~40 [Default: 0]
Audio
Mute
Off [Default]
On
Volume 0-10 [Default: 5]
Setup
Projection
Front [Default]
Rear
Ceiling-top
Rear-top
Screen Type [WXGA model]
16:9
16:10 [Default]
Lamp Settings
Lamp Reminder
Off
On [Default]
Lamp Reset
Cancel [Default]
Yes
English
47
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup
Filter Settings
Optional Filter
Installed
Yes
No
Filter Usage
Hours
(Read only)
Filter Reminder
Off
300hr
500hr [Default]
800hr
1000hr
Filter Reset
Cancel [Default]
Yes
Power Settings
Direct Power On
Off [Default]
On
Signal Power On
Off [Default]
On
Auto Power Off
(min)
0~180 (5 min increments)
[Default: 20]
Sleep Timer
(min)
0~990 (30 min increments)
[Default: 0]
Always On
No [Default]
Yes
Quick Resume
Off [Default]
On
Power Mode
(Standby)
Active
Eco [Default]
USB Power
Off
On
Auto [Default]
Security
Security
Off
On
Security Timer
Month
Day
Hour
Change
Password
HDMI Link
Settings
HDMI Link
Off
On
Inclusive of TV
No
Yes
Power On Link
Mutual
PJ --> Device
Device --> PJ
Power Off Link
Off
On
English
48
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup
Test Pattern
Green Grid
Magenta Grid
White Grid
White
Off
Remote
Settings
[depends on
remote]
IR Function
On
Off
User 1
Test Pattern
Brightness
Contrast
Sleep Timer [Default]
Color Matching
Color Temp
Gamma
Projection
Lamp Settings
Zoom
Freeze
User 2
Test Pattern
Brightness
Contrast
Sleep Timer
Color Matching [Default]
Color Temp
Gamma
Projection
Lamp Settings
Zoom
Freeze
User 3
Test Pattern
Brightness
Contrast
Sleep Timer
Color Matching
Color Temp [Default]
Gamma
Projection
Lamp Settings
Zoom
Freeze
English
49
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup
Projector ID 0~99
Options
Language
English [Default]
Deutsch
Français
Italiano
Español
Português
Polski
Nederlands
Svenska
Norsk/Dansk
Suomi
ελληνικά
繁體中文
简体中文
日本
한국어
Русский
Magyar
Čeština
ไทย
Türkçe
Tiếng Việt
Bahasa Indonesia
Română
Slovenčina
Closed
Captioning
CC1
CC2
Off [Default]
Menu Settings
Menu Location
Top left
Top right
Center [Default]
Bottom left
Bottom right
Menu Timer
Off
5sec
10sec [Default]
Auto Source
Off [Default]
On
English
50
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup Options
Input Source
HDMI
VGA
Video
Input Name
HDMI
Default [Default]
Custom
VGA
Default [Default]
Custom
Video
Default [Default]
Custom
High Altitude
Off [Default]
On
Display Mode
Lock
Off [Default]
On
Keypad Lock
Off [Default]
On
Information Hide
Off [Default]
On
Logo
Default [Default]
Neutral
Background
Color
None [Default: for Video/Pro-AV]
Blue [Default for Data model]
Red
Green
Grey
Logo
Reset OSD
Cancel [Default]
Yes
Reset to Default
Cancel [Default]
Yes
English
51
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Information
Regulatory
Serial Number
Source
Resolution 00x00
Refresh Rate 0.00Hz
Display Mode
Power mode
(Standby)
Lamp Hours
Bright 0 hr
Eco 0 hr
Dynamic 0 hr
Eco+ 0 hr
Total
Projector ID 00~99
Filter Usage
Hours
Brightness
Mode
FW Version
System
MCU
Note:
The “Lamp Reset” in OSD will only reset both Lamp Hours in OSD and Lamp Hours in service mode.
The Projection Hours in service mode will not be reset.
Each display mode can be adjusted and saved the value.
In 3D timing mode, the zoom/edge mask will be disabled to prevent from image break.
The available menu options vary depending on the model type.
Display menu
Display image settings menu
Display Mode (Data mode)
There are many factory presets optimized for various types of images.
Presentation: This mode is suitable for showing PowerPoint presentations when the projector is
connected to the PC.
Bright: Maximum brightness from PC input.
Cinema: Select this mode for home theater.
Game: Select this mode to increase the brightness and response time level for enjoying video games.
sRGB: Standardized accurate color.
DICOM SIM.: This mode can project a monochrome medical image such as an X ray radiography,
MRI, etc.
User: Memorize user’s settings.
3D: To experience the 3D effect, you need to have 3D glasses. Make sure your PC/portable device
has a 120 Hz signal output quad buffered graphics card and a 3D Player installed.
English
52
USING THE PROJECTOR
Wall Color
Use this function to obtain an optimized screen image according to the wall color. Select between off, blackboard,
light yellow, light green, light blue, pink, and gray.
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture.
Sharpness
Adjust the sharpness of the image.
Color
Adjust a video image from black and white to fully saturated color.
Tint
Adjust the color balance of red and green.
Gamma
Set up gamma curve type. After the initial setup and ne tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
Film: For home theater.
Video: For video or TV source.
Graphics: For PC / Photo source.
Standard(2.2): For standardized setting.
1.8/ 2.0/ 2.4: For specic PC / Photo source.
Color Settings
Congure the color settings.
BrilliantColor
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
Color Temperature (Data mode): Select a color temperature from Warm, Medium, or Cool.
Color Matching: Select the following options:
± Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W)
level of the image.
± Hue: Adjust the color balance of red and green.
± Saturation: Adjust a video image from black and white to fully saturated color.
± Gain: Adjust the image brightness.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the “Color Matching” menu.
RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the “RGB Gain/Bias” menu.
English
53
USING THE PROJECTOR
Color Matching
Color White
R
G
B
Reset
Exit
Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
White Level: Allow user to adjust White Level when inputting Video signals.
Note: White level can only be adjusted for Video input source.
Black Level: Allow user to adjust Black Level when inputting Video signals.
Note: Black level can only be adjusted for Video input source.
IRE: Allow user to adjust IRE value when inputting Video signals.
Note:
IRE is only available with NTSC video format.
IRE can only be adjusted for Video input sources.
Signal
Adjust the signal options.
Automatic: Congure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
Frequency: Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to icker vertically.
Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or ickers, use this function to correct it.
H. Position: Adjust the horizontal positioning of the image.
V. Position: Adjust the vertical positioning of the image.
Exit: Exit the “Signal” menu.
Note: Signal can only be adjusted for RGB/Component input sources.
Brightness Mode (Lamp base data)
Adjust the brightness mode settings for lamp-based projectors.
Bright: Choose “Bright” to increase the brightness.
Eco.: Choose “Eco.” to dim the projector lamp which will lower power consumption and extend the
lamp life.
Dynamic: Choose “Dynamic” to dim the lamp power which will be based on brightness level of the
content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will
be extended.
Eco+: When Eco+ mode is activated, the brightness level of the content is automatically detected to
signicantly reduced lamp power consumption (up to 70%) during periods of inactivity.
English
54
USING THE PROJECTOR
Reset
Return the factory default settings for color settings.
Display 3D menu
3D Mode
Use this option to disable the 3D function or select the appropriate the 3D function.
Off: Select “Off” to turn off 3D mode.
DLP-Link: Select to use optimized settings for DLP 3D Glasses.
IR: Select “IR” to use optimized setting for IR 3D Glasses.
3D → 2D
Use this option to specify how the 3D content should appear on the screen.
3D: Display 3D signal.
L (Left): Display the left frame of 3D content.
R (Right): Display the right frame of 3D content.
3D Format
Use this option to select the appropriate 3D format content.
Auto: When a 3D identication signal is detected, the 3D format is selected automatically.
SBS: Display 3D signal in “Side-by-Side” format.
Top and Bottom: Display 3D signal in “Top and Bottom” format.
Frame Sequential: Display 3D signal in “Frame Sequential” format.
3D Sync Invert
Use this option to enable/disable the 3D sync invert function.
Display aspect ratio menu
Aspect Ratio
Select the aspect ratio of the displayed image between the following options:
4:3: This format is for 4:3 input sources.
16:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV.
16:10 (WXGA and WUXGA models only): This format is for 16:10 input sources, like widescreen
laptops.
LBX (except SVGA and XGA models): This format is for non-16x9, letterbox source and if you use
external 16x9 lens to display 2.35:1 aspect ratio in full resolution.
Native: This format displays the original image without any scaling.
Auto: Automatically selects the appropriate display format.
English
55
USING THE PROJECTOR
Note:
It is considred normal that black bars appear on the right side and left side of the image with the
resolution of WUXGA; and around the image wtih a resolution of 1080p in each aspect mode.
The black bars and boarder will change in size depending on the aspect ratio.
Black bars
WUXGA active area
1080p active area
WUXGA 1920x1200 pixels
1080p 1920x1080 pixels
For projectors with a resolution of WUXGA (1920 × 1200)
Format
Aspect ratio
16:10 16:9 4:3
Native
16:9
Full
Zoom
Auto
English
56
USING THE PROJECTOR
Note:
Detailed informations about LBX mode:
± Some Letter-Box Format DVDs are not enhanced for 16x9 TVs. In this situation, the image
will not look right when displaying image in 16:9 mode. In this situation, please try to use the
4:3 mode to view the DVD. If the content is not 4:3, there will be black bars around the image
in 16:9 display. For this type of content, you can use LBX mode to ll the image on the 16:9
display.
± If you use an external anamorphic lens, this LBX mode also allows you to watch a 2.35:1
content (include Anamorphic DVD and HDTV lm source) that supports anamorphic wide is
enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars. Lamp
power and vertical resolution are fully utilized.
To use the superwide format, do the following:
a) Set the screen aspect ratio to 2.0:1.
b) Align the projector image correctly on the screen.
1080P scaling table:
16:9 screen 480i/p 576i/p 1080i/p 720p PC
4x3 Scale to 1440x1080.
16x9 Scale to 1920x1080.
LBX Scale to 1920x1440, then get the central 1920x1080 image to display.
Native mode -1:1 mapping centered.
-No scaling will be made; the image is displayed with the resolution based on input source.
Auto -If this format is selected, screen type will auto become 16:9 (1920x1080).
-If source is 4:3, auto resize to 1440 x1080.
-If source is 16:9 auto resize to 1920x1080.
-If source is 16:10 auto resize to 1920x1200 and cut 1920x1080 area to display.
1080P auto mapping rule:
Auto
Input resolution Auto/Scale
H-resolution V-resolution 1920 1080
4:3
640 480 1440 1080
800 600 1440 1080
1024 768 1440 1080
1280 1024 1440 1080
1400 1050 1440 1080
1600 1200 1440 1080
Wide Laptop
1280 720 1920 1080
1280 768 1800 1080
1280 800 1728 1080
SDTV
720 576 1350 1080
720 480 1620 1080
HDTV
1280 720 1920 1080
1920 1080 1920 1080
English
58
USING THE PROJECTOR
WXGA scaling table (screen type 16:9):
16 : 9 screen 480i/p 576i/p 1080i/p 720p PC
4x3 Scale to 960x720.
16x9 Scale to 1280x720.
LBX Scale to 1280x960, then get the central 1280x720 image to display.
Native mode 1:1 mapping centered. 1:1 mapping
display
1280x720.
1280x720
centered.
1:1 mapping
centered.
Auto -If this format is select, Screen type will auto become 16:9 (1280x720).
-If source is 4:3, auto resize to 960x720.
-If source is 16:9 auto resize to 1280x720.
-If source is 15:9 auto resize to 1200x720.
-If source is 16:10 auto resize to 1152x720.
WXGA auto mapping rule (screen type 16:9):
Auto
Input resolution Auto/Scale
H-resolution V-resolution 1280 720
4:3
640 480 960 720
800 600 960 720
1024 768 960 720
1280 1024 960 720
1400 1050 960 720
1600 1200 960 720
Wide Laptop
1280 720 1280 720
1280 768 1200 720
1280 800 1152 720
SDTV
720 576 1280 720
720 480 1280 720
HDTV
1280 720 1280 720
1920 1080 1280 720
SVGA and XGA scaling table:
Source 480i/p 576i/p 1080i/p 720p
4x3 Scale to 1024x768.
16x9 Scale to 1024x576.
Native mode No scaling will be made; the resolution is dependent on which input source and is then
displayed.
Auto -If source is 4:3, auto resize to 1024x768.
-If source is 16:9 auto resize to 1024x576.
-If source is 15:9 auto resize to 1024x614.
-If source is 16:10 auto resize to 1024x640.
English
59
USING THE PROJECTOR
SVGA and XGA auto mapping rule (screen type 16:9):
Auto
Input resolution Auto/Scale
H-resolution V-resolution 1024 768
4:3
640 480 1024 768
800 600 1024 768
1024 768 1024 768
1600 1200 1024 768
Wide Laptop
1280 720 1024 576
1280 768 1024 614
1280 800 1024 640
SDTV
720 576 1024 576
720 480 1024 576
HDTV
1280 720 1024 576
1920 1080 1024 576
WUXGA scaling table (screen type 16:10):
Note:
Supported screen type 16:10 (1920x1200), 16:9 (1920x1080).
When screen type is 16:9 there is no 16x10 format in this condition.
When screen type is 16:10 there is no 16x9 format in this condition.
If user change to auto, will auto change the display mode at same time.
16 : 10 screen 480i/p 576i/p 1080i/p 720p PC
4x3 Scale to 1600x1200.
16x10 Scale to 1920x1200.
LBX Scale to 1920x1440, then get the central 1920x1200 image to display.
Native mode -1:1 mapping centered.
-No scaling will be made; the resolution is dependent on which input source and is then
displayed.
Auto -If this format is select, screen type will auto become 16:10 (1920x1200).
-If source is 4:3, auto resize to 1600x1200.
-If source is 16:9 auto resize to 1920x1080.
-If source is 16:10 auto resize to 1920x1200.
English
60
USING THE PROJECTOR
WUXGA auto mapping rule (screen type 16:10):
Auto
Input resolution Auto/Scale
H-resolution V-resolution 1920 1200
4:3
640 480 1600 1200
800 600 1600 1200
1024 768 1600 1200
1280 1024 1600 1200
1400 1050 1600 1200
1600 1200 1600 1200
Wide Laptop
1280 720 1920 1080
1280 768 1920 1152
1280 800 1920 1200
SDTV
720 576 1500 1200
720 480 1800 1200
HDTV
1280 720 1920 1080
1280 1080 1920 1080
WUXGA scaling table (screen type 16:9):
16 : 9 screen 480i/p 576i/p 1080i/p 720p PC
4x3 Scale to 1440x1080.
16x9 Scale to 1920x1080.
LBX Scale to 1920x1440, then get the central 1920x1080 image to display.
Native mode -1:1 mapping centered.
-No scaling will be made; the resolution is dependent on which input source and is then
displayed.
Auto -If this format is select, Screen type will auto become 16:9 (1920x1080).
-If source is 4:3, auto resize to 1440x1080.
-If source is 16:9 auto resize to 1920x1080.
-If source is 16:10 auto resize to 1920x1200 and cut 1920x1080 area to display.
WUXGA auto mapping rule (screen type 16:9):
Auto
Input resolution Auto/Scale
H-resolution V-resolution 1920 1080
4:3
640 480 1440 1080
800 600 1440 1080
1024 768 1440 1080
1280 1024 1440 1080
1400 1050 1440 1080
1600 1200 1440 1080
Wide Laptop
1280 720 1920 1080
1280 768 1800 1080
1280 800 1728 1080
SDTV
720 576 1350 1080
720 480 1620 1080
HDTV
1280 720 1920 1080
1920 1080 1920 1080
English
61
USING THE PROJECTOR
Display edge mask menu
Edge Mask
Use this function to remove the video encoding noise on the edge of video source.
Display zoom menu
Zoom
Use to reduce or magnify an image on the projection screen.
Display image shift menu
Image Shift
Adjust the projected image position horizontally (H) or vertically (V).
Display keystone menu
Keystone
Adjust the image distortion caused by tilting the projector.
Audio menu
Audio mute menu
Mute
Use this option to temporarily turn off the sound.
On: Choose the “On” to turn mute on.
Off: Choose the “Off” to turn mute off.
Note:
“Mute” function affects both internal and external speaker volume.
When an external speaker is connected, the internal speaker is automatically muted.
Audio volume menu
Volume
Adjust the audio volume level.
English
62
USING THE PROJECTOR
Setup menu
Setup projection menu
Projection
Select the preferred projection between front, rear, ceiling-top, and rear-top.
Setup screen type menu
Screen Type (for WXGA and WUXGA models only)
Choose the screen type from 16:9 and 16:10.
Setup lamp settings menu
Lamp Reminder
Choose this function to show or to hide the warning message when the changing lamp message is displayed. The
message will appear 30 hours before suggested replacement of lamp.
Lamp Reset
Resets the lamp hour counter after replacing the lamp.
Setup lter settings menu
Optional Filter Installed
Set the warning message setting.
Yes: Display warning message after 500 hours of use.
Note: “Filter Usage Hours / Filter Reminder / Filter Reset” will only appear when “Optional Filter Installed” is “Yes”.
No: Turn off warning message.
Filter Usage Hours
Display the lter time.
Filter Reminder
Choose this function to show or hide the warning message when the changing lter message is displayed. The
available options include Off, 300hr, 500hr, 800hr, and 1000hr.
Filter Reset
Reset the dust lter counter after replacing or cleaning the dust lter.
Setup power settings menu
Direct Power On
Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the “Power” key on the projector keypad or on the remote control.
Signal Power On
Choose “On” to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the “Power” key on the projector Keypad or on the remote control.
Note:
If the “Signal Power On” option is turned “On”, the power consumption of the projector in standby
mode will be over 3W.
Due to the ErP directive, this feature is not available on models found in EMEA.
English
63
USING THE PROJECTOR
Auto Power Off (min.)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has nished (in minutes).
Sleep Timer (min.)
Congure the sleep timer.
Sleep Timer (min): Sets the countdown timer interval. The countdown timer will start, with or without
a signal being sent to the projector. The projector will automatically power off when the countdown has
nished (in minutes).
Note: The Sleep Timer is reset every time when the projector is powered off.
Always On: Check to set the sleep timer always on.
Quick Resume
Set the quick resume setting.
On: If the projector is accidentally turned off, this feature allows the projector to be instantly powered
on again, if selected within a period of 100 seconds.
Off: The fan will start cooling the system after 10 seconds when user turns off the projector.
Power Mode (Standby)
Set the power mode setting.
Active: Choose “Active” to return to normal standby.
Eco: Choose “Eco.” to save power dissipation further < 0.5W.
Note: The fans will still run in active standby if “Signal Power On” is enabled.
USB Power
Set the USB power settings.
On: The projector is always powered on by a USB power source.
Off: The USB Power function is off.
Auto: The projector is automatically powered on by a USB power source.
Setup security menu
Security
Enable this function to prompt for a password before using the projector.
On: Choose “On” to use security verication when the turning on the projector.
Off: Choose “Off” to be able to switch on the projector without password verication.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.
English
64
USING THE PROJECTOR
Setup HDMI link settings menu
Note:
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control
them on the same power on or power off status using the HDMI Link control feature in the projector’s
OSD. This lets one device or multiple devices in a group power on or power off via HDMI Link Feature
in a typical conguration, your DVD player may be connected to the projector through an amplier or
home theater system.
HDMI
Apmlier
HDMI
DVD Player
HDMI Link
Enable/disable the HDMI Link function. The inclusive TV, power on link, and power off link options will only
available if the setting is set to “On”.
Inclusive of TV
Set to “Yes” if you prefer both TV and projector to be automatically turned off at the same time. To prevent both
devices to be turned off at the same time, set the setting to “No”.
Power On Link
CEC power on command.
Mutual: Both projector and CEC device will be turned on simultaneously.
PJ -> Device: The CEC device will be turned on only after the projector is switched on.
Device -> PJ: The projector will be switched on only after the CEC device is turned on.
Power Off Link
Enable this function to let both HDMI Link and projector to be automatically turned off at the same time.
Setup test pattern menu
Test Pattern
Select the test pattern from green grid, magenta grid, white grid, white or disable this function (off).
Setup remote settings menu
IR Function
Set the IR function setting.
On: Choose “On”, the projector can be operated by the remote control from top IR receiver.
Off: Choose “Off”, the projector can’t be operated by the remote control. By selecting “Off”, you will be
able to use the Keypad keys.
User1/ User2/ User3 (Type 1)
Assign the default function for User1, User2, or User3 between HDMI 2, test pattern, brightness, contrast, sleep
timer, color matching, color temp, gamma, projection, lamp settings, zoom, freeze, and MHL.
English
65
USING THE PROJECTOR
User1/ User2/ User3 (Type 2)
Assign the default function for User1, User2, or User3 between HDMI 2, test pattern, LAN, brightness, contrast,
sleep timer, color matching, color temp, gamma, projection, lamp settings, zoom, freeze, and MHL.
User1/ User2/ User3 (Type 3, Type 4. and Type 5)
Assign the default function for User1, User2, or User3 between test pattern, brightness, contrast, sleep timer, color
matching, color temp, gamma, projection, lamp settings, zoom, and freeze.
Setup projector ID menu
Projector ID
ID denition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command.
Setup options menu
Language
Select the multilingual OSD menu between English, German, French, Italian, Spanish, Portuguese, Polish, Dutch,
Swedish, Norwegian/Danish, Finnish, Greek, traditional Chinese, simplied Chinese, Japanese, Korean, Russian,
Hungarian, Czechoslovak, Arabic, Thai, Turkish, Farsi, Vietnamese, Indonesian, Romanian, and Slovakian.
Closed Captioning
Closed Captioning is a text version of the program sound or other information displayed on the screen. If the input
signal contains closed captions, you can turn on the feature and watch the channels. The available options include
“Off”, “CC1”, and “CC2”.
Note: Closed Captioning is only available for Video NTSC.
Menu Settings
Set the menu location on the screen and congure menu timer settings.
Menu Location: Select the menu location on the display screen.
Menu Timer: Set the duration where the OSD menu stays visible on the screen.
Auto Source
If you set this option “On” and press the button on the projector keypad or button on the remote control
then the next available input source is selected automatically. Set “Off” to disable auto source function.
Input Source (WUXGA and 1080P models)
Select the input source between HDMI1/MHL, HDMI2, VGA, and Video.
Input Source (SVGA, XGA, and WXGA models)
Select the input source between HDMI, VGA, and Video.
Input Name (WUXGA and 1080P models)
Use to rename the input function for easier identication. The available options include HDMI1/MHL, HDMI2, VGA,
and Video.
Input Name (SVGA, XGA, and WXGA models)
Use to rename the input function for easier identication. The available options include HDMI, VGA, and Video.
High Altitude
When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin.
Display Mode Lock
Choose “On” or “Off” to lock or unlock adjusting display mode settings.
English
66
USING THE PROJECTOR
Keypad Lock
When the keypad lock function is “On”, the Keypad will be locked. However, the projector can be operated by the
remote control. By selecting “Off”, you will be able to reuse the Keypad.
Information Hide
Enable this function to hide the information message.
Off: Choose “On” to hide the info message.
On: Choose “Off” to show the “searching” message.
Logo
Use this function to set the desired startup screen. If changes are made, they will take effect the next time the
projector is powered on.
Default: The default startup screen.
Neutral: Logo is not displayed on startup screen.
Background Color
Use this function to display a blue, red, green, grey color, none, or logo screen when no signal is available.
Note: If the background color is set to “None”, then the background color is black.
Setup reset menu
Reset OSD
Return the factory default settings for OSD menu settings.
Reset to Default
Return the factory default settings for Setup menu settings.
Network menu (Type 2)
Network LAN menu
Network Status
Display the network connection status (read-only).
MAC Address
Display the MAC address (read-only).
DHCP
Use this option to enable or disable the DHCP function.
On: Projector will obtain an IP address automatically from your network.
Off: To assign IP, subnet mask, gateway, and DNS conguration manually.
Note: Exiting OSD will automatically apply the entered values.
IP Address
Display the IP address.
Subnet Mask
Display subnet mask number.
Gateway
Display the default gateway of the network connected to the projector.
English
67
USING THE PROJECTOR
DNS
Display the DNS number.
How to use web browser to control your projector
1. Turn “On” the DHCP option on projector to allow a DHCP server to automatically assign an IP address.
2. Open the web browser in your PC and type in the projector’s IP address (“Network > LAN > IP
Address”).
3. Enter the user name and password, and click “Login”.
The projector’s conguration web interface opens.
Note:
The default user name and password is “admin”.
The steps in this section is based on Windows 7 operating system.
Making a direct connection from your computer to the projector*
1. Turn “Off” the DHCP option on the projector.
2. Congure the IP address, Subnet Mask, Gateway, and DNS on projector (“Network > LAN”).
3. Open Network and Sharing Center page on your PC, and assign the identical network parameters to
your PC as set on projector. Click “OK” to save the parameters.
4. Open the web browser on your PC and type in to the URL eld the IP address, assigned in step 3.
Then press “Enter” key.
Reset
Reset all values for LAN parameters.
Network control menu
Crestron
Use this function to select the network function (port: 41794).
For more information, please visit http://www.crestron.com and www.crestron.com/getroomview.
Extron
Use this function to select the network function (port: 2023).
PJ Link
Use this function to select the network function (port: 4352).
English
68
USING THE PROJECTOR
AMX Device Discovery
Use this function to select the network function (port: 9131).
Telnet
Use this function to select the network function (port: 23).
HTTP
Use this function to select the network function (port: 80).
Setup network control settings menu
LAN_RJ45 function
For simplicity and ease of operation, the projector provides diverse networking and remote management features.
The LAN / RJ45 function of the projector through a network, such as remotely manage: Power On / Off, brightness,
and contrast settings. Also, you can view the projector status information, such as: Video- Source, Sound-Mute, etc.
(Ethernet)
Projector
Wired LAN terminal functionalities
This projector can be controlled by using a PC (laptop) or other external device via LAN / RJ45 port and compatible
with Crestron / Extron / AMX (Device -Discovery) / PJLink.
Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.
Extron is a registered trademark of Extron Electronics, Inc. of the United States.
AMX is a registered trademark of AMX LLC of the United States.
PJLink applied for trademark and logo registration in Japan, the United States of America, and other
countries by JBMIA.
The projector is supported by the specied commands of the Crestron Electronics controller and related software,
for example RoomView®.
http://www.crestron.com/
This projector is compliant to support Extron device(s) for reference.
http://www.extron.com/
This projector is supported by AMX ( Device Discovery ).
http://www.amx.com/
This projector supports all commands of PJLink Class1 (Version 1.00).
http://pjlink.jbmia.or.jp/english/
For more detailed information about the various types of external devices which can be connected to the LAN /
English
69
USING THE PROJECTOR
RJ45 port and remote control the projector, as well as the supported commands for these external devices, please
contact the Support-Service directly.
LAN RJ45
1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop).
2. On the PC (Laptop), select Start > Control Panel > Network Connections.
3. Right-click on the Local Area Connection, and select Property.
4. In the Properties window, select the General tab, and select Internet Protocol (TCP / IP).
English
70
USING THE PROJECTOR
5. Click “Properties”.
6. Type in the IP address and Subnet mask, then press “OK”.
7. Press the “Menu” button on the projector.
8. Open on projector Network > LAN.
9. Enter the following connection parameters:
± DHCP: Off
± IP Address: 192.168.0.100
± Subnet Mask: 255.255.255.0
± Gateway: 192.168.0.254
± DNS: 192.168.0.1
10. Press “Enter” to conrm settings.
11. Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher
installed.
12. In the Address bar, input the projectors IP address: 192.168.0.100.
13. Press “Enter”.
English
71
USING THE PROJECTOR
The projector is setup for remote management. The LAN / RJ45 function displays as follows:
Information page
Main page
Tool page
Contact IT helpdesk
English
72
USING THE PROJECTOR
RS232 by Telnet Function
There is alternative RS232 command control way, in projector so called “RS232 by TELNET” for LAN / RJ45
interface.
Quick Start-Guide for “RS232 by Telnet”
Check and get the IP address on OSD of the projector.
Make sure that the PC / laptop can access the web-page of the projector.
Make sure that “Windows Firewall” setting is set disabled in case of “TELNET” function ltering out by
PC / laptop.
.
1. Select Start > All Programs.> Accessories > Command Prompt.
2. Input the command format as follows:
± telnet ttt.xxx.yyy.zzz 23 (“Enter” key pressed)
± (ttt.xxx.yyy.zzz: IP-Address of the projector)
3. If Telnet-Connection ready, and user can have RS232 command input, then “Enter” key pressed, the
RS232 command will be workable.
Specication for “RS232 by TELNET”:
1. Telnet: TCP.
2. Telnet port: 23 (for more detail, kindly please get contact with the service agent or team).
3. Telnet utility: Windows “TELNET.exe” (console mode).
4. Disconnection for RS232-by-Telnet control normally: Close
5. Windows Telnet utility directly after TELNET connection ready.
± Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for
Telnet-Control application.
± Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command for
Telnet-Control.
± Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 (ms).
English
73
USING THE PROJECTOR
Info menu
Info menu
View the projector information as listed below:
Regulatory
Serial Number
Source
Resolution
Refresh Rate
Display Mode
Power Mode (Standby)
Lamp Hours
Network Status (Type 2 only)
IP Address (Type 2 only)
Projector ID
Filter Usage Hours
Brightness Mode
FW Version
English
74
MAINTENANCE
Replacing the lamp
The projector automatically detects the lamp life. When the lamp life is nearing the end of use, a warning message
will appear on the screen.
Warning
Lamp Warning
Lamp life exceeded.
When you see this message, please contact your local reseller or service center to change the lamp as soon as
possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp.
Warning: If ceiling mounted, please use caution when opening the lamp access panel. It is
recommended to wear safety glasses if changing the bulb when ceiling mounted. Caution must be used
to prevent any loose parts from falling out of projector.
Warning: Lamp compartment is hot! Allow it to cool down before changing lamp!
Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The
bulb may shatter and cause injury if it is dropped.
English
75
MAINTENANCE
Replacing the lamp (continued)
3
1
2
6
4
5
Procedure:
1. Switch off the power to the projector by pressing the " " button on the remote control or the projector
keypad.
2. Allow the projector to cool down for at least 30 minutes.
3. Disconnect the power cord.
4. Unscrew the screw on the cover. 1
5. Remove the cover. 2
6. Unscrew the screw on the lamp module. 3
7. Lift up the lamp handle. 4
8. Remove the lamp cord. 5
9. Remove the lamp module carefully. 6
10. To replace the lamp module, reverse the previous steps.
11. Turn on the projector and reset the lamp timer.
12. Lamp Reset: (i) Press "Menu" (ii) Select "Setup" (iii) Select "Lamp Settings"
(iv) Select "Lamp
Reset"
(v) Select "Yes".
Note:
The screw on the lamp cover and the lamp cannot be removed.
The projector cannot be turned on if the lamp cover has not been placed back on the projector.
Do not touch the glass area of the lamp. Hand oil can cause the lamp shatter. Use a dry cloth to clean
the lamp module if it was accidentally touched.
English
76
MAINTENANCE
Installing and cleaning the dust lter
Installing the dust lter
Note: Dust lters are only required/supplied in the selected regions with excessive dust.
Cleaning the dust lter
We recommend you to clean the dust lter every three months. Clean it more often if the projector is used in a
dusty environment.
Lamp replacing
Procedure:
1. Switch off the power to the projector by pressing the " " button on the remote control or the projector
keypad.
2. Disconnect the power cord.
3. Remove the dust lter carefully. 1
4. Clean or replace the dust lter. 2
5. To install the dust lter, reverse the previous steps.
1
2
English
77
ADDITIONAL INFORMATION
Compatible resolutions
Digital compatibility
B0/Established
Timing
B0/Standard Timing B0/Detail Timing B1/Video Mode B1/Detail Timing
720x400 @ 70Hz SVGA: Native timing: 640x480p @ 60Hz 720x480p @ 60Hz
640x480 @ 60Hz 800x600 @ 120Hz
640x480 @ 67Hz 1024x768 @ 120Hz XGA: 1024x768 @ 60Hz 720x480p @ 60Hz 1280x720p @ 60Hz
640x480 @ 72Hz 1280x800 @ 60Hz WXGA: 1280x800 @ 60Hz;
1280x720 @ 60Hz
1280x720p @ 60Hz 1366x768 @ 60Hz
640x480 @ 75Hz 1280x1024 @ 60Hz 1080P: 1920x1080 @ 60Hz 1920x1080i @ 60Hz 1920x1080i @ 50Hz
800x600 @ 56Hz 1680x1050 @ 60Hz WUXGA: 1920x1200 @
60Hz
720(1440)x480i @ 60Hz 1920x1080p @ 60Hz
800x600 @ 60Hz 1280x720 @ 60Hz 1920x1080p @ 60Hz
800x600 @ 72Hz 1280x720 @ 120Hz 720x576p @ 50Hz
800x600 @ 75Hz 1600x1200 @ 60Hz 1280x720p @ 50Hz
832x624 @ 75Hz XGA/WXGA: 1920x1080i @ 50Hz
1024x768 @ 60Hz 1440x900 @ 60Hz 720(1440)x576i @ 50Hz
1024x768 @ 70Hz 1024x768 @ 120Hz 1920x1080p @ 50Hz
1024x768 @ 75Hz 1280x800 @ 60Hz 1920x1080p @ 24Hz
1280x1024 @ 75Hz 1280x1024 @ 60Hz 1920x1080p @ 30Hz
1152x870 @ 75Hz 1680x1050 @ 60Hz
1280x720 @ 60Hz
1280x720 @ 120Hz
1600x1200 @ 60Hz
1080P and WUXGA:
1280x720 @ 60Hz
1280x800 @ 60Hz
1280x1024 @ 60Hz
1400x1050 @ 60Hz
1600x1200 @ 60Hz
1280x768 @ 60Hz
1440x900 @ 60Hz
1280x720 @ 120Hz
1024x768 @ 120Hz
English
78
ADDITIONAL INFORMATION
Analog compatibility
B0/Established
Timing
B0/Standard Timing B0/Detail Timing B1/Video Mode B1/Detail Timing
720x400 @ 70Hz SVGA: Native timing: 1366x768 @ 60Hz
640x480 @ 60Hz 800x600 @ 120Hz
640x480 @ 67Hz 1024x768 @ 120Hz XGA: 1024x768 @ 60Hz
640x480 @ 72Hz 1280x800 @ 60Hz WXGA: 1280x800 @ 60Hz;
1280x720 @ 60Hz
640x480 @ 75Hz 1280x1024 @ 60Hz 1080P: 1920x1080 @ 60Hz
800x600 @ 56Hz 1680x1050 @ 60Hz WUXGA: 1920x1200 @
60Hz
800x600 @ 60Hz 1280x720 @ 60Hz
800x600 @ 72Hz 1280x720 @ 120Hz
800x600 @ 75Hz 1600x1200 @ 60Hz
832x624 @ 75Hz XGA/WXGA:
1024x768 @ 60Hz 1440x900 @ 60Hz
1024x768 @ 70Hz 1024x768 @ 120Hz
1024x768 @ 75Hz 1280x800 @ 60Hz
1280x1024 @ 75Hz 1280x1024 @ 60Hz
1152x870 @ 75Hz 1680x1050 @ 60Hz
1280x720 @ 60Hz
1280x720 @ 120Hz
1600x1200 @ 60Hz
1080P and WUXGA:
1280x720 @ 60Hz
1280x800 @ 60Hz
1280x1024 @ 60Hz
1400x1050 @ 60Hz
1600x1200 @ 60Hz
1280x768 @ 60Hz
1440x900 @ 60Hz
1280x720 @ 120Hz
1024x768 @ 120Hz
English
79
ADDITIONAL INFORMATION
True 3D video compatibility
Input resolution
HDMI 1.4a 3D
Input
Input timing
1280x720P @ 50Hz Top - and - Bottom
1280x720P @ 60Hz Top - and - Bottom
1280x720P @ 50Hz Frame packing
1280x720P @ 60Hz Frame packing
1920x1080i @ 50 Hz Side- by-Side (Half)
1920x1080i @ 60 Hz Side- by-Side (Half)
1920x1080P @ 24 Hz Top - and- Bottom
1920x1080P @ 24 Hz Frame packing
HDMI 1.3
1920x1080i @ 50Hz
Side-by-Side(Half) SBS mode is on
1920x1080i @ 60Hz
1280x720P @ 50Hz
1280x720P @ 60Hz
800x600 @ 60Hz
1024x768 @ 60Hz
1280x800 @ 60Hz
1920x1080i @ 50Hz
Top-and-Bottom TAB mode is on
1920x1080i @ 60Hz
1280x720P @ 50Hz
1280x720P @ 60Hz
800x600 @ 60Hz
1024x768 @ 60Hz
1280x800 @ 60Hz
480i HQFS 3D format is Frame sequential
Note:
If 3D input is 1080p@24hz, the DMD should replay with integral multiple with 3D mode.
Support NVIDIA 3DTV Play if there is no patent fee from Optoma. 1080i@25hz and 720p@50hz will
run in 100 hz; other 3D timing will run in 120hz.
1080p@24hz will run in 144Hz.
English
80
ADDITIONAL INFORMATION
Image size and projection distance
WUXGA
Desired
Distance (m)
Screen size Top Screen size Top
(Min zoom) (Max zoom)
Diagonal (inch) W (cm) x H (cm)
From base to
top of image
(cm)
Diagonal (inch) W (cm) x H (cm
From base to
top of image
(cm)
1.2 27.06 58 x 36 40 35 76 x 47 52
2 45 97 x 61 67 59 126 x 79 87
2.5 56 121 x 76 83 73 158 x 99 109
3 68 146 x 91 100 88 190 x 118 130
3.5 79 170 x 106 117 103 221 x 138 152
4 90 194 x 121 134 117 253 x 158 174
5 113 243 x 152 167 147 316 x 197 217
6 135 291 x 182 200 176 379 x 237 261
7 158 340 x 212 234 205 442 x 276 304
8 180 389 x 243 267 235 505 x 316 347
9 203 437 x 273 301 264 569 x 355 391
10.2 230 495 x 310 341 299.15 644 x 403 443
Note: Zoom ratio is 1.3x.
Desired image size Distance (m) Top (cm)
Diagonal (inch) W (cm) x H (cm) Max zoom Min zoom
From base to top of
image
34 73 x 46 1.2 1.5 50
50 108 x 67 1.7 2.2 74
60 129 x 81 2.0 2.7 89
70 151 x 94 2.4 3.1 104
80 172 x 108 2.7 3.5 118
90 194 x 121 3.1 4.0 133
100 215 x 135 3.4 4.4 148
120 258 x 162 4.1 5.3 178
150 323 x 202 5.1 6.7 222
200 431 x 269 6.8 8.9 296
250 538 x 337 8.5 11.1 370
300 646 x 404 10.2 13.3 444
Note: Zoom ratio is 1.3x.
English
81
ADDITIONAL INFORMATION
1080p
Desired
Distance (m)
Screen size Top Screen size Top
(Min zoom) (Max zoom)
Diagonal (inch) W (cm) x H (cm)
From base to
top of image
(cm)
Diagonal (inch) W (cm) x H (cm
From base to
top of image
(cm)
1.2 26.33 58 x 33 38 34 76 x 43 49
2 44 97 x 55 63 57 126 x 71 82
2.5 55 121 x 68 79 71 158 x 89 103
3 66 146 x 82 95 86 190 x 107 124
3.5 77 170 x 96 111 100 221 x 124 144
4 88 194 x 109 127 114 253 x 142 165
5 110 243 x 137 158 143 316 x 178 206
6 132 291 x 164 190 171 379 x 213 247
7 154 340 x 191 222 200 442 x 249 289
8 176 389 x 219 254 228 505 x 284 330
9 197 437 x 246 285 257 569 x 320 371
10.5 230 510 x 287 333 299.62 663 x 373 433
Note: Zoom ratio is 1.3x.
Desired image size Distance (m) Top (cm)
Diagonal (inch) W (cm) x H (cm) Max zoom Min zoom
From base to top of
image
34 75 x 42 1.2 1.5 49
50 111 x 62 1.8 2.3 72
60 133 x 75 2.1 2.7 87
70 155 x 87 2.5 3.2 101
80 177 x 100 2.8 3.6 116
90 199 x 112 3.2 4.1 130
100 221 x 125 3.5 4.6 144
120 266 x 149 4.2 5.5 173
150 332 x 187 5.3 6.8 217
200 443 x 249 7.0 9.1 289
250 553 x 311 8.8 11.4 361
300 664 x 374 10.5 13.7 433
Note: Zoom ratio is 1.3x.
English
82
ADDITIONAL INFORMATION
SVGA
Diagonal
length
(inch)
Size of
(16:9)
Screen
Screen Size W x H Projection Distance (D)
Offset (Hd)
(m) (inch) (m) (feet)
Width Height Width Height Wide Tele Wide Tele (m) (inch)
36 0.73 0.55 28.80 21.6 1.4 1.6 4.59 5.25 0.08 3.15
40 0.81 0.61 32.00 24 1.6 1.8 5.25 5.91 0.09 3.54
50 1.02 0.76 40.00 30 2.0 2.2 6.56 7.22 0.12 4.72
60 1.22 0.91 48.00 36 2.4 2.6 7.87 8.53 0.14 5.51
70 1.42 1.07 56.00 42 2.8 3.1 9.19 10.17 0.16 6.30
80 1.63 1.22 64.00 48 3.2 3.5 10.50 11.48 0.18 7.09
90 1.83 1.37 72.00 54 3.5 4.0 11.48 13.12 0.21 8.27
100 2.03 1.52 80.00 60 3.9 4.4 12.80 14.44 0.23 9.06
120 2.44 1.83 96.00 72 4.7 5.3 15.42 17.39 0.27 10.63
150 3.05 2.29 120.00 90 5.9 6.6 19.36 21.65 0.34 13.39
180 3.66 2.74 144.00 108 7.1 7.9 23.29 25.92 0.41 16.14
200 4.06 3.05 160.00 120 7.9 8.8 25.92 28.87 0.46 18.11
250 5.08 3.81 200.00 150 9.9 11.0 32.48 36.09 0.57 22.44
300 6.10 4.57 240.00 180 11.8 13.2 38.71 43.31 0.69 27.17
Note:
Vertical Lens Shift values are always calculated from the Center of Projection Lens. Therefore the
distance 5.2 cm (2.05 inch) from the Base to the Center of Projection Lens needs to be added to each
Vertical Lens Shift value.
Zoom ratio is 1.1x.
XGA
Diagonal
length
(inch)
Size of
(16:9)
Screen
Screen Size W x H Projection Distance (D)
Offset (Hd)
(m) (inch) (m) (feet)
Width Height Width Height Wide Tele Wide Tele (m) (inch)
36 0.73 0.55 28.80 21.6 1.4 1.6 4.59 5.25 0.08 3.15
40 0.81 0.61 32.00 24 1.6 1.8 5.25 5.91 0.09 3.54
50 1.02 0.76 40.00 30 2.0 2.2 6.56 7.22 0.12 4.72
60 1.22 0.91 48.00 36 2.4 2.6 7.87 8.53 0.14 5.51
70 1.42 1.07 56.00 42 2.8 3.1 9.19 10.17 0.16 6.30
80 1.63 1.22 64.00 48 3.2 3.5 10.50 11.48 0.18 7.09
90 1.83 1.37 72.00 54 3.5 4.0 11.48 13.12 0.21 8.27
100 2.03 1.52 80.00 60 3.9 4.4 12.80 14.44 0.23 9.06
120 2.44 1.83 96.00 72 4.7 5.3 15.42 17.39 0.27 10.63
150 3.05 2.29 120.00 90 5.9 6.6 19.36 21.65 0.34 13.39
180 3.66 2.74 144.00 108 7.1 7.9 23.29 25.92 0.41 16.14
200 4.06 3.05 160.00 120 7.9 8.8 25.92 28.87 0.46 18.11
250 5.08 3.81 200.00 150 9.9 11.0 32.48 36.09 0.57 22.44
300 6.10 4.57 240.00 180 11.8 13.2 38.71 43.31 0.69 27.17
Note:
Vertical Lens Shift values are always calculated from the Center of Projection Lens. Therefore the
distance 5.2 cm (2.05 inch) from the Base to the Center of Projection Lens needs to be added to each
Vertical Lens Shift value.
Zoom ratio is 1.1x.
English
83
ADDITIONAL INFORMATION
WXGA
Page 82
Diagonal
length
(inch)
Size of
(16:9)
Screen
Screen Size W x H Projection Distance (D)
Offset (Hd)
(m) (inch) (m) (feet)
Width Height Width Height Wide Tele Wide Tele (m) (inch)
36 0.78 0.48 30.53 19.08 1.4 1.6 4.59 5.25 0.06 2.36
40 0.86 0.54 33.92 21.2 1.6 1.8 5.25 5.91 0.07 2.76
50 1.08 0.67 42.40 26.5 2.0 2.2 6.56 7.22 0.09 3.54
60 1.29 0.81 50.88 31.8 2.4 2.7 7.87 8.86 0.10 3.94
70 1.51 0.94 59.36 37.1 2.8 3.1 9.19 10.17 0.12 4.72
80 1.72 1.08 67.84 42.4 3.2 3.6 10.50 11.81 0.13 5.12
90 1.94 1.21 76.32 47.7 3.6 4.0 11.81 13.12 0.15 5.91
100 2.15 1.35 84.80 53 4.0 4.5 13.12 14.76 0.16 6.30
120 2.58 1.62 101.76 63.6 4.8 5.4 15.75 17.72 0.20 7.87
150 3.23 2.02 127.20 79.5 6.0 6.7 19.69 21.98 0.25 9.84
180 3.88 2.42 152.64 95.4 7.2 8.0 23.62 26.25 0.30 11.81
200 4.31 2.69 169.60 106 8.0 8.9 26.25 29.20 0.34 13.39
250 5.38 3.37 212.00 132.5 10.0 11.1 32.81 36.42 0.41 16.14
300 6.46 4.04 254.40 159 12.0 13.4 39.37 43.96 0.50 19.69
Note:
Vertical Lens Shift values are always calculated from the Center of Projection Lens. Therefore the
distance 5.2 cm (2.05 inch) from the Base to the Center of Projection Lens needs to be added to each
Vertical Lens Shift value.
Zoom ratio is 1.1x.
H
Hd
H
5.2 cm
W
D
English
84
ADDITIONAL INFORMATION
Projector dimensions and ceiling mount installation
1. To prevent damage to your projector, please use the Optoma ceiling mount.
2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to
the projector meet the following specications:
Screw type: M4*3
Minimum screw length: 10mm
Unit: mm
Lens
Note: Please note that damage resulting from incorrect installation will void the warranty.
Warning:
If you buy a ceiling mount from another company, please be sure to use the correct screw size.
Screw size will vary depending on the thickness of the mounting plate.
Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector.
Avoid installing the projector near a heat source.
English
85
ADDITIONAL INFORMATION
IR remote control 1 codes
Key legend Description Key code
Power Press to turn on / off the projector. 81
Freeze Press to freeze the projector image. 8B
Aspect Press to change aspect ratio of a displayed image. 98
AV mute Press to turn off/ on projector built-in speaker 8A
Keystone+/up
Press to adjust image distortion caused by tilting the projector.
Press to navigate up.
C6
Mute Press to momentarily turn off / on the audio. 92
Left/Vol-
Press to adjust to decrease the volume.
Press to navigate left.
C8
Enter Conrm your item selection.
-C5 (for OSD)
-CA (for emulation
of USB mouse via
USB)
Right/Vol+
Press to adjust to increase the volume.
Press to navigate right.
C9
Menu Press to display or exit the on-screen display menus for projector. 88
Down/
Keystone-
Press to adjust image distortion caused by tilting the projector.
Press to navigate down.
C7
3D Press to manually select a 3D mode that matches your 3D content. 93
English
86
ADDITIONAL INFORMATION
Key legend Description Key code
HDMI Press to choose HDMI source. 86
VGA Press to choose VGA source. 8E
Video Press to choose video source. CE
Source Press to select an input signal. C3
Brightness
mode
Press to automatically adjust the picture brightness to give an
optimum contrast performance.
87
ReSync Automatically synchronize the projector to the input source. C4
English
87
ADDITIONAL INFORMATION
IR remote control 2 codes
Freeze
Power Switch
L
R
Keystone Volume
Page
-
-
+
-
+
1 2
Menu
3
3D
4
HDMI
5
VGA
6
Video
7
User1
8
User2
9
User3
Source
0
Resync
Page+Mode
Enter
Key
Key
code
Printing-key
denition
Description
Power 81 Power on/off Press to turn on / off the projector.
Switch 3E Switch Press to switch the USB mouse on / off.
Display blank /
audio mute
8A
Press to hide / unhide the screen picture and turn off / on
audio.
Freeze 8B Freeze Press to freeze the projector image.
Mute 92 Press to momentarily turn off / on the audio.
Mouse left click L CB L Use as mouse left click.
Mouse right click R CC R Use as mouse right click.
Four
directional select
keys
C6 Up arrow
Use to select items or make adjustments to
your selection.
C8 Left arrow
C9 Right arrow
C7 Down arrow
Enter
C5 Enter
Conrm your item selection.
CA Enter
Page - C2 Page- Press to page down.
English
88
ADDITIONAL INFORMATION
Key
Key
code
Printing-key
denition
Description
Mode 95 Mode Press to switch Display mode on or off.
Page + C1 Page+ Press to page up.
Keystone
-
+
85 Keystone+
Press to adjust image distortion caused by tilting the
projector.
84 Keystone-
Volume
-
+
8C Volume +
Press to adjust to increase / decrease the volume.
8F Volume -
Aspect ratio / 1 98
/ 1
Press to change aspect ratio of a displayed image.
Use as numeric keypad number "1".
Menu / 2 88 Menu/2
Press to display or exit the on-screen display menus
for projector.
Use as numeric keypad number "2".
3D / 3 93 3D/3
Press to manually select a 3D mode that matches
your 3D content.
Use as numeric keypad number "3".
HDMI / 4 86 HDMI/4
Press to choose HDMI source.
Use as numeric keypad number "4".
VGA / 5 D0 VGA/5
Press to choose VGA source.
Use as numeric keypad number "5".
Video / 6 D1 Video/6
Press to choose composite video source.
Use as numeric keypad number "6".
User1 / 7; User2 / 8;
User3 / 9
D2 User 1/7
User dened keys. Please see page 64 to setup.
Use as numeric keypad numbers "7", "8", and "9"
accordingly.
D3 User 2/8
D4 User 3/9
Source C3 Source Press to select an input signal.
Brightness
mode / 0
96
/ 0
Press to automatically adjust the picture brightness
to give an optimum contrast performance.
Use as numeric keypad number "0".
Re-sync C4 Re-Sync
Press to automatically synchronize the projector to the
input source.
English
89
ADDITIONAL INFORMATION
IR remote control 3 codes
ON
OFF
Menu
VGA1
HDMI1
User2
Contrast
Aspect ratio
DB
Volume
Source
Re-sync
User1
Brightness
Keystone
Mute
User3
Mode
3D
Sleep Timer
Volume
HDMI2
VGA2 Video YPbPr
Key
Custom code
Data
code
Printing-key
denition
Description
Byte 1 Byte 2 Byte 3
Power on 32 CD 02 ON Press to turn on the projector.
Power off 32 CD 2E OFF Press to turn off the projector.
User 1 32 CD 36 User1
User dened keys. Please see page 64 to
setup.
User 2 32 CD 65 User2
User 3 32 CD 66 User3
Brightness 32 CD 41 Brightness Adjust the brightness of the image.
Contrast 32 CD 42 Contrast
Control the degree of difference between the
lightest and darkest parts of the picture.
Display mode 32 CD 05 Mode
Select a display mode for optimized settings
for different applications. Please see page
51.
Keystone 32 CD 07 Keystone
Adjust image distortion caused by tilting the
projector.
Aspect ratio 32 CD 64 Aspect ratio
Press to change aspect ratio of a displayed
image.
English
90
ADDITIONAL INFORMATION
Key
Custom code
Data
code
Printing-key
denition
Description
Byte 1 Byte 2 Byte 3
3D 32 CD 89 3D
Manually select a 3D mode that matches your
3D content.
Volume + 32 CD 09 Volume + Adjust to increase volume.
Four direction
keys
32 CD 11
Use ▲, ◄, ►, or ▼ to select items or make
adjustments to your selection.
32 CD 10
32 CD 12
32 CD 14
Source 32 CD 18 Source Press “Source” to select an input signal.
Enter key 32 CD 0F Conrm your item selection.
Re-sync 32 CD 04 Re-sync
Automatically synchronizes the projector to
the input source.
Volume - 32 CD 0C Volume - Adjust to decrease volume.
Menu 32 CD 0E Menu
Display or exit the on-screen display menus
for projector.
HDMI 1 32 CD 16 HDMI1
Press “HDMI1” to choose source from
HDMI 1 / MHL connector.
HDMI 2 32 CD 30 HDMI2
Press “HDMI2” to choose source from
HDMI 2 connector.
VGA 1 32 CD 1B VGA1 No function
VGA 2 32 CD 1E VGA2 No function
Video 32 CD 1C Video No function
YPbPr 32 CD 17 YPbPr No function
English
91
ADDITIONAL INFORMATION
IR remote control 4 codes
Freeze
Power Switch
L
R
V Keystone Volume
Page+
-
+
-
+
1 2
Menu
3
3D
4
HDMI
5
VGA
6
Video
7
User1
8
User2
9
User3
Source
0
Resync
Page
-
Laser
Enter
Key
Key
code
Printing-key
definition
Description
Power 81 Power on/off Press to turn on / off the projector.
Switch 3E Switch Press to switch the USB mouse on / off.
Display blank /
audio mute
8A
Press to hide / unhide the screen picture and turn off / on
audio.
Freeze 8B Freeze Press to freeze the projector image.
Mute 92 Press to momentarily turn off / on the audio.
Mouse left click L CB L Use as mouse left click.
Mouse right click R CC R Use as mouse right click.
Four
directional select
keys
C6 Up arrow
Use to select items or make adjustments to
your selection.
C8 Left arrow
C9 Right arrow
C7 Down arrow
Enter
C5 Enter
Conrm your item selection.
CA Enter
Page - C2 Page- Press to page down.
English
92
Key
Key
code
Printing-key
definition
Description
Laser N/A Laser Use as laser pointer.
Page + C1 Page+ Press to page up.
V Keystone
-
+
85 Keystone+
Press to adjust image distortion caused by tilting the
projector.
84 Keystone-
Volume
-
+
8C Volume +
Press to adjust to increase / decrease the volume.
8F Volume -
Aspect ratio / 1 98
/ 1
Press to change aspect ratio of a displayed image.
Use as numeric keypad number "1".
Menu / 2 88 Menu/2
Press to display or exit the on-screen display menus
for projector.
Use as numeric keypad number "2".
3D / 3 93 3D/3
Press to manually select a 3D mode that matches
your 3D content.
Use as numeric keypad number "3".
HDMI / 4 86 HDMI/4
Press to choose HDMI source.
Use as numeric keypad number "4".
VGA / 5 D0 VGA/5
Press to choose VGA source.
Use as numeric keypad number "5".
Video / 6 D1 Video/6
Press to choose composite video source.
Use as numeric keypad number "6".
User1 / 7; User2 / 8;
User3 / 9
D2 User 1/7
User dened keys. Please see page 45 to setup.
Use as numeric keypad numbers "7", "8", and "9"
accordingly.
D3 User 2/8
D4 User 3/9
Source C3 Source Press to select an input signal.
Brightness
mode / 0
96
/ 0
Press to automatically adjust the picture brightness
to give an optimum contrast performance.
Use as numeric keypad number "0".
Re-sync C4 Re-Sync
Press to automatically synchronize the projector to the
input source.
English
93
ADDITIONAL INFORMATION
Troubleshooting
If you experience a problem with your projector, please refer to the following information. If a problem persists,
please contact your local reseller or service center.
Image problems
No image appears on-screen
Ensure all the cables and power connections are correctly and securely connected as described in the
"Installation" section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please refer to the "Replacing the Lamp"
section.
Ensure that the "AV Mute" feature is not turned on.
Image is out of focus
Adjust the Focus Ring on the projector lens.
Make sure the projection screen is between the required distance from the projector. (Please refer to
pages 79-83).
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16: 9 format
on projector side.
If you play the LBX format DVD title, please change the format as LBX in projector OSD.
If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD.
Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player.
Image is too small or too large
Adjust the Zoom Lever on the top of the projector.
Move the projector closer to or further from the screen.
Press "Menu" on the projector panel, go to "Display > Aspect Ratio". Try the different settings.
Image has slanted sides:
If possible, reposition the projector so that it is centered on the screen and below the bottom of the
screen.
Use "Display > Keystone" from the OSD to make an adjustment.
Image is reversed
Select "Setup > Projection" from the OSD and adjust the projection direction.
Blurry double image
Press "3D" button and switch to "Off" to avoid normal 2D image is blurry double image.
English
94
ADDITIONAL INFORMATION
Two images, side-by-side format
Press "3D" button and switch to "SBS" for input signal is HDMI 1.3 2D 1080i side-by-side.
Image does not display in 3D
Check if the battery of 3D glasses is drained.
Check if the 3D glasses is turned on.
When the input signal is HDMI 1.3 2D (1080i side-by-side half), press "3D" button and switch to "SBS".
Other problems
The projector stops responding to all controls
If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before
reconnecting power.
Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this
happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp,
follow the procedures in the "Replacing the Lamp" section on pages 74-75.
Remote control problems
If the remote control does not work
Check the operating angle of the remote control is pointed within ±15° to the IR receiver on the
projector.
Make sure there are not any obstructions between the remote control and the projector. Move to within
6 m (20 ft) of the projector.
Make sure batteries are inserted correctly.
Replace batteries if they are exhausted.
English
95
ADDITIONAL INFORMATION
Warning indicators
When the warning indicators (see below) light up or ash, the projector will automatically shutdown:
"LAMP" LED indicator is lit red and if "On/Standby" indicator ashes red.
"TEMP" LED indicator is lit red and if "On/Standby" indicator ashes red. This indicates the projector
has overheated. Under normal conditions, the project can be switched back on.
"TEMP" LED indicator ashes red and if "On/Standby" indicator ashes red.
Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or
ash, please contact your nearest service center for assistance.
LED lightning messages
Message
Power LED Power LED
Temp-LED
Lamp-LED
(Red) (Green or Blue) (Red) (Red)
Standby state
(Input power cord)
Steady light
Power on (Warming)
Flashing
(0.5 sec off /
0.5 sec on)
Power on & Lamp
lighting
Steady light
Power off (Cooling)
Flashing
(0.5 sec off /
0.5 sec light). Back
to red steady light
when cooling fan
turns off.
Quick Resume (100
secs)
Flashing
(0.25 sec off /
0.25 sec on)
Error (Lamp fail) Flashing Steady light
Error (Fan failure) Flashing Flashing
Error (Over Temp) Flashing Steady light
Power off:
Power Off
Power Off?
Press power key again.
Lamp warning:
Warning
Lamp Warning
Lamp life exceeded.
English
96
ADDITIONAL INFORMATION
Temperature warning:
Warning
TEMPERATURE TOO HIGH
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 45 degree C.
If the problem persists in spite of the above.
Please contact a service center for repair.
Fan failed:
Warning
FAN LOCKED
The projector will switch off automatically
Please contact a service center for repair.
Out of display range:
HDMI
Out Of Range
Power down warning:
Power Down
Power Down Timer Active
Power down in sec.
Security timer alarm:
Warning
Security Timer Alarm
Time Out in sec.
English
97
ADDITIONAL INFORMATION
Specications
Optical Description
Native resolution 1080P / WUXGA / SVGA / XGA / WXGA
Lens Manual zoom and manual focus
Image size (diagonal)
1080P:
- 26”~299”
WUXGA:
- 27”~299”
SVGA / XGA / WXGA:
- 27.78”~304.4”
Projection distance
1080P / WUXGA:
- 1m ~ 10m (focus range)
SVGA / XGA / WXGA:
- 1m ~ 12m (focus range)
Electrical Description
Color reproduction 1073.4 Million color
Scan rate
- Horizontal scan rate: 15.375~91.146 KHz
- Vertical scan rate: 50~ 85 Hz (120Hz for 3D feature projector)
Built-in speaker Yes, 10W
USB power out
- WUXGA_1080P: 5V ~ 1.5A
- SVGA_XGA_WXGA: 5V ~ 1A
Power requirement 100 - 240V AC 50/60Hz
Input current 2.8-1.0 A
Mechanical Description
Installation orientation Front, Rear, Ceiling - Top, Rear - Top
Dimensions
- 316 mm (W) x 243.5 mm (D) x 98 mm (H) (without feet)
- 316 mm (W) x 243.5 mm (D) x 108.5 mm (H) (with feet)
Weight 2.9 kg
Environmental conditions Operating in 5 ~ 40°C , 10% to 85% humidity (non-condensing)
Note: All specications are subject to change without notice.
English
98
ADDITIONAL INFORMATION
Optoma global ofces
For service or support, please contact your local ofce.
USA
3178 Laurelview Ct. 888-289-6786
Fremont, CA 94538, USA 510-897-8601
www.optomausa.com services@optoma.com
Canada
3178 Laurelview Ct. 888-289-6786
Fremont, CA 94538, USA 510-897-8601
www.optomausa.com services@optoma.com
Latin America
3178 Laurelview Ct. 888-289-6786
Fremont, CA 94538, USA 510-897-8601
www.optomausa.com services@optoma.com
Europe
Unit 1, Network 41, Bourne End Mills
Hemel Hempstead, Herts,
HP1 2UJ, United Kingdom +44 (0) 1923 691 800
www.optoma.eu +44 (0) 1923 691 888
Service Tel : +44 (0)1923 691865 service@tsc-europe.com
Benelux BV
Randstad 22-123 +31 (0) 36 820 0252
1316 BW Almere +31 (0) 36 548 9052
The Netherlands
www.optoma.nl
France
Bâtiment E +33 1 41 46 12 20
81-83 avenue Edouard Vaillant +33 1 41 46 94 35
92100 Boulogne Billancourt, France savoptoma@optoma.fr
Spain
C/ José Hierro,36 Of. 1C +34 91 499 06 06
28522 Rivas VaciaMadrid, +34 91 670 08 32
Spain
Deutschland
Wiesenstrasse 21 W +49 (0) 211 506 6670
D40549 Düsseldorf, +49 (0) 211 506 66799
Germany info@optoma.de
Scandinavia
Lerpeveien 25 +47 32 98 89 90
3040 Drammen +47 32 98 89 99
Norway info@optoma.no
PO.BOX 9515
3038 Drammen
Norway
Korea
WOOMI TECH.CO.,LTD. +82+2+34430004
4F, Minu Bldg.33-14, Kangnam-Ku, +82+2+34430005
Seoul,135-815, KOREA
korea.optoma.com
Japan
東京都足立区綾瀬3-25-18
株式会社オーエス info@os-worldwide.com
コンタクトセンター:0120-380-495 www.os-worldwide.com
Taiwan
12F., No.213, Sec. 3, Beixin Rd., +886-2-8911-8600
Xindian Dist., New Taipei City 231, +886-2-8911-6550
Taiwan, R.O.C. services@optoma.com.tw
www.optoma.com.tw asia.optoma.com
Hong Kong
Unit A, 27/F Dragon Centre,
79 Wing Hong Street, +852-2396-8968
Cheung Sha Wan, +852-2370-1222
Kowloon, Hong Kong www.optoma.com.hk
China
5F, No. 1205, Kaixuan Rd., +86-21-62947376
Changning District +86-21-62947375
Shanghai, 200052, China www.optoma.com.cn
www.optoma.com
*36.7AZ01G002-A*
P/N:36.7AZ01G002-A
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma S322e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma S322e in the language / languages: English as an attachment in your email.

The manual is 18,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Optoma S322e

Optoma S322e User Manual - German - 99 pages

Optoma S322e User Manual - Dutch - 99 pages

Optoma S322e User Manual - French - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info