216011

Optoma projector hd82 Manual

52
Zoom out
Zoom in
Previous page
1/52
Next page
English
1
Table of contents
Table of Contents ...................................................................................1
Usage Notice ..........................................................................................2
Safety Information .........................................................................................2
Precautions....................................................................................................3
Eye Safety Warnings .....................................................................................5
Introduction.............................................................................................6
Package Overview.........................................................................................6
Product Overview ..........................................................................................7
Main Unit ................................................................................................................ 7
Connection Ports ................................................................................................... 8
Remote Control ...................................................................................................... 9
Backup Remote Control ....................................................................................... 10
Coin Cell Battery Replacement ............................................................................ 10
Installation ............................................................................................ 11
Connecting the Projector ............................................................................. 11
Connect to Notebook/DVI/VGA-In ....................................................................... 11
Connect to Video/SCART .................................................................................... 12
Powering On/Off the Projector.....................................................................13
Powering On the Projector ................................................................................... 13
Powering Off the projector ...................................................................................14
Warning Indicator ................................................................................................. 14
Adjusting the Projected Image.....................................................................15
Adjusting the Projector’s Height ...........................................................................15
Adjusting Projected Image Position Using PureShift ...........................................16
Adjusting Projection Image Size ..........................................................................18
User Controls .......................................................................................19
Remote Control ...........................................................................................19
On-screen Display Menus ...........................................................................21
How to operate .................................................................................................... 21
Menu Tree ............................................................................................................ 22
Image ................................................................................................................... 23
Display ................................................................................................................28
System ................................................................................................................. 31
Setup .................................................................................................................... 35
Appendices...........................................................................................38
Troubleshooting ...........................................................................................38
Image Problems .................................................................................................. 38
Other Problems ................................................................................................... 39
Projector Status Indication .................................................................................. 40
Remote Control Problems ................................................................................... 41
Replacing the Lamp.....................................................................................42
Compatibility Modes ....................................................................................44
RS232 Commands and Protocol Function List............................................45
Ceiling Mount Installation ............................................................................48
Optoma Global Ofces ................................................................................49
Regulation & Safety Notices ........................................................................51
2
Usage Notice
Safety Information
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous volt-
age” within the product’s enclosure that may be of sufcient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servic-
ing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of
the projector and to protect from over heating, it is recommended to
install the projector in a location that does not block ventilation. As an
example, do not place the projector on a crowded coffee table, sofa,
bed, etc. Do not put the projector in an enclosure such as a book case
or a cabinet that restricts air ow.
2. Do not use the projector near water or moisture. To reduce the risk of
re and/or electric shock, do not expose the projector to rain or mois-
ture.
3. Do not install near heat sources such as radiators, heaters, stoves or
any other apparatus such as ampliers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specied by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused.
Physical damage/abuse would be (but not limited to):
▀■ Unit has been dropped.
▀■ Power supply cord or plug has been damaged.
▀■ Liquid has been spilled on to the projector.
▀■ Projector has been exposed to rain or moisture.
▀■ Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch
dangerous voltage points and short out parts that could result in re or
electric shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
English
3
Usage Notice
Precautions
Please follow all warnings, precautions and main-
tenance as recommended in this user’s guide.
When the lamp reaches
the end of its life, the
projector will not turn
back on until the lamp
module has been
replaced. To replace
the lamp, follow the
procedures listed under
“Replacing the Lamp”
section on page 42.
▀■ Warning-
Do not look into the projector’s lens when the
lamp is on. The bright light may hurt your
eyes.
▀■ Warning-
To reduce the risk of re or electric shock, do
not expose this projector to rain or moisture.
▀■ Warning-
Please do not open or disassemble the projec-
tor as this may cause electric shock.
▀■ Warning-
When replacing the lamp, please allow the
unit to cool down. Follow instructions as
described on page 42.
▀■ Warning-
This projector will detect the life of the lamp it-
self. Please be sure to change the lamp when
it shows warning messages.
▀■ Warning-
Reset the “Lamp Reset” function from the on-
screen display “System|Lamp Setting” menu
after replacing the lamp module (refer to page
34).
▀■ Warning-
When switching the projector off, please
ensure the cooling cycle has been completed
before disconnecting power. Allow 90 seconds
for the projector to cool down.
▀■ Warning-
Do not use lens cap when projector is in
operation.
▀■ Warning-
When the lamp is approaching to the end of its
life time, the message “Replacement suggest-
ed” will show on the screen. Please contact
your local reseller or service center to change
the lamp as soon as possible.
Note
Note
4
Usage Notice
Do:
▀■ Turn off and unplug the power plug from the AC outlet before
cleaning the product.
▀■ Use a soft dry cloth with mild detergent to clean the display
housing.
▀■ Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Do not:
▀■ Block the slots and openings on the unit provided for ventila-
tion.
▀■ Use abrasive cleaners, waxes or solvents to clean the unit.
▀■ Use under the following conditions:
- In extremely hot, cold or humid environments.
Ensure that the ambient room temperature is within 5
- 35°C
Relative Humidity is 5 - 35°C, 80% (Max.), non-condensing
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic eld.
- In direct sunlight.
English
5
Usage Notice
Eye Safety Warnings
▀■ Avoid staring/facing directly into the projector beam at all
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise
students when they are asked to point out something on the
screen.
▀■ In order to minimize the lamp power, use room blinds to re-
duce ambient light levels.
6
Introduction
POWER
TEMP
LAMP
STANDBY
Image- Shift
Menu
Mode
Edge Mask
Oversc an
16:9
4:3
Letter -Box
Native
HDMl1 HDMl2
S-Video
Video
YPbPr
DVI
/
Re-Syn c
VGA
Screen
UP
DOWN
Bright ness Power Off
Power On
Contra st PureEngin e
DB
Brite Mode
PURE
Power Cord 1.8m
Package Overview
Unpack and inspect the box contents to ensure all
parts listed below are in the box. If something is
missing, please contact Optoma customer service.
Documentation :

User’s Manual

Warranty Card

Quick Start Card

WEEE Card
Due to different applica-
tions in each Country,
some regions may have
different accessories.
2 x AA Batteries
Projector with lens cap
VGA Cable 2.0m
(Europe Only)
Note
Note
Remote Control
Composite Video Cable
1.8m
(Not Available in European Version)
HDMI Cable 2.0m
(Europe Only)
SCART RGB/S-Video
Adapter
(Europe Only)
Power
OnOff
MENU
Re-Sync
Source
Image Shift
Backup Remote Control
CR2025
3V
Backup Remote Battery 12V Trigger Connector
(EMEA/USA*2, ASIA*1)
English
7
Introduction
Product Overview
1. Power Button
2. LED Indicators
3. IR Receivers
4. Tilt-Adjustment Feet
5. Focus
6. Zoom
7. Lamp Replacement Cover
8. Connection Ports
9. Vertical Lens Shift Adjustment
10. Horizontal Lens Shift Adjustment
11. IR Transmitter for Use with Panoview Motorised Screens
POWER
TEMP
LAMP
STANDBY
Main Unit
1
8
7
3
4
5
6
4
2
3
11
9
10
3
8
Introduction
A
B
12V TRIGGER
VIDEO
S-VIDEO
RS232
Y/G
Pb/B
Pr/R
VGA/SCART
DVI-D
HDMI 1
HDMI 2
v1.3 with Deep Color
Connection Ports
1. 12V Trigger A
2. 12V Trigger B
3. RS232
4. Composite Video
5. S-Video
6. Component Video
7. VGA Input
8. DVI-D Input (PC Digital and DVI-HDCP)
9. HDMI 1
10. HDMI 2
11. Power Socket
1
4 11
2
5 7 8 9 106
3
English
9
Introduction
Image-Shift
Menu
Mode
Edge Mask
Overscan
16:9
4:3
Letter-Box
Native
HDMl1 HDMl2
S-Video
Video
YPbPr
DVI
/
Re-Sy nc
VGA
Screen
UP
DOWN
Brightness Power Off
Power On
Contrast PureE ngine
DB
Brite Mode
PURE
Remote Control
1. Power On
2. Power Off
3. PureEngine
4. Brite Mode
5. Image Shift
6. Four Directional Select
Keys
7. Mode
8. Edge Mask
9. Screen Up/Down
10. Re-Sync
11. VGA
12. DVI
13. Video
14. HDMI 2
15. S-Video
16. Native
17. YPbPr
18. HDMI 1
19. 16:9
20. 4:3
21. Letter-Box
22. Overscan
23. Menu
24. Enter
25. DynamicBlack
26. Contrast
27. Brightness
1
26
2
3
4
5
6
20
19
18
17
9
10
12
13
25
11
15 1416
27
21
7
8
23
22
24
10
Introduction
Power
OnOff
MENU
Re-Sync
Source
Image Shift
Backup Remote Control
1. Power Off
2. Power On
3. Enter
4. Four Directional Select
Keys
5. Image Shift
6. Source
7. Re-Sync
8. Menu
1
3
5
6
8
7
2
4
Before using the
remote control for the
rst time, remove the
transparent insulation
tape.
Note
Note
Coin Cell Battery Replacement
M
n
O
2
-
L
i
C
E
L
L
3
V
O
L
T
S
J
A
P
A
N
H
CR2025
3
V
O
L
T
S
C
R
2
0
2
5
M
3
V
O
L
T
S
CR2025
1 2
3 4
Note
Note
Backup remote con-
trol is magnetically at-
tached to the bottom
of the projector.
Power
OnOff
MENU
Re-Sync
Source
Image Shift
English
11
Installation
Due to the difference
in applications for each
country, some regions
may have different ac-
cessories.
1............................................................... RS232 Cable (Optional Accessory)
2.................................................................... VGA Input Cable (Europe Only)
3.................................................................... DVI Cable (Optional Accessory)
4..........................................................DVI/HDMI Cable (Optional Accessory)
5....................................................................................................Power Cord
Note
Note
A
B
12V TRIGGER
VIDEO
S-VIDEO
RS232
Y/G
Pb/B
Pr/R
VGA/SCART
DVI-D
HDMI 1
HDMI 2
v1.3 with Deep Color
E62405SP
R
VGA,DVI
VGA,DVI
Connecting the Projector
4
5
1
2
3
Connect to Notebook/DVI/VGA-In
12
Installation
Due to the difference
in applications for each
country, some regions
may have different ac-
cessories.
1...............................RCA Component Cable for YPbPr (Optional Accessory)
2....................... Composite Video Cable (Not Available in European Version)
3............................................................. S-Video Cable (Optional Accessory)
4............................................... SCART RGB/S-Video Adapter (Europe Only)
5.................................................................... DVI Cable (Optional Accessory)
6............................................................................HDMI Cable (Europe Only)
7....................................................................................................Power Cord
Note
Note
A
B
12V TRIGGER
VIDEO
S-VIDEO
RS232
Y/G
Pb/B
Pr/R
VGA/SCART
DVI-D
HDMI 1
HDMI 2
v1.3 with Deep Color
E62405SP
R
DVD player, Set-top Box
HDTV receiver
DVD player, Set-top Box
HDTV receiver
Video Output
S-Video Output
Connecting the Projector
4
5
1
2
3
Connect to Video/SCART
6
7
12V Trigger B is pro-
grammable trigger.
Note
Note
English
13
Installation
POWER
TEMP
LAMP
STANDBY
Powering On the Projector
1. Remove the lens cap.
2. Securely connect the power cord and signal cable. When
connected, the power led will turn red.
3. Turn on the lamp by pressing
“ ” button on the side of the
projector or on the remote control. The power led will now
ash blue.
The startup screen will display in approximately 30 seconds.
The rst time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source that you want to display on the screen
(computer, notebook, video player, etc). The projector will
detect the source automatically and will display on the
screen. If not, push menu button and go to “SETUP”. Make
sure that the “Source Lock” has been set to “Off”.
▀■If you connected multiple sources at the same time, press
the “Source” key on the remote control to switch between
inputs.
Powering On/Off the Projector
Turn on the projector
rst and then select the
signal sources.
POWER
TEMP
LAMP
STANDBY
1
Note
Note
2
14
Installation
Warning Indicator
▀■ When the “LAMP” indicator led is lit orange, the projector will
automatically shut down. Please call the nearest Optoma
facility for assistance.
▀■ When the “TEMP” indicator turns red, it indicates the projec-
tor has overheated. The projector will shut down automati-
cally.
Under normal conditions, the projector can be switched on
again after it has cooled down.
▀■ When the “TEMP” indicator ashes red, it indicates the fan
has failed.
Powering Off the Projector
1. Press the “ ” button on the remote control or “ ” button on
the side of the projector two times with one second interval
in between to turn off the projector. First push of button will
display the following message on the screen.
Press the button again to conrm the shut down. If the but-
ton is not pressed, the message will disappear in 5 seconds.
2. The cooling fans continue to operate for about 60 seconds
for cooling cycle and the Power LED will turn blue. When
the lights solid red, the projector has entered standby mode.
If you wish to turn the projector back on, you must wait until
the projector has completed the cooling cycle and has en-
tered standby mode. Once in standby mode, simply press “
” button to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
4. Do not turn on the projector immediately following a power
off procedure.
Contact the nearest
service center if the
projector displays these
symptoms. See page
49 for more information.
Note
Note
English
15
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height
Tilt-Adjustment Feet
The projector is equipped with elevator feet for adjusting
the image height.
To raise the image:
Use screw in foot to raise the image to the desired height
angle and ine-tune the display angle .
To lower the image:
Use screw in foot to lower the image to the desired height
angle and ine-tune the display angle .
1
16
Installation
Horizontal Lens
Shift Lever
Adjusting Projected Image Position
Using PureShift
The PureShift feature provides a lens shift function that can be
used to adjust the position of the projected image either hori-
zontally or vertically within the range detailed below. PureShift
is a unique system that provides lens shift while maintaining
a much higher ANSI contrast ratio than traditional lens shift
system.
Vertical Lens
Shift Lever
▀■ Adjusting the vertical image position
The minimum vertical image offset is xed at 5% of the image
height above the centre of the projector lens. This can not be
changed. The vertical image height can be adjusted between
5% and 30% of the image height. Note that the maximum verti-
cal image height adjustment can be limited by the horizontal
image position. For example it is not possible to achieve the
maximum vertical image position height detailed above if the
horizontal image position is at maximum. Please consult the
PureShift Range diagram below for further clarication.
English
17
User Controls
Screen Height
(H)
100%
5%
30%
Distance
(L)
Screen
Maximum Shift
25%
15%W 15%W
Left Side Right Side
Screen Width
(W)
130%(V), 0%(H)
-15%(H) 15%(H)
105%(V)
UP/DOWN
RIGHT/LEFT
H
H x 15%
V
H x 15%
V
V x 25%
Offset max=V x 30%
Offset min=V x 5%
▀■ Adjusting the horizontal image position
With the lens in the centre position the horizontal image position
can be adjusted to the left or right by up to a maximum of 15%
of the image width. Note that the maximum horizontal image
height adjustment can be limited by the vertical image position.
For example it is not possible to achieve the maximum horizon-
tal image position if the vertical image position is at maximum.
Please consult the PureShift Range diagram below for further
clarication.
Screen Height
(H)
100%
5%
30%
Distance
(L)
Screen
Maximum Shift
25%
15%W 15%W
Left Side Right Side
Screen Width
(W)
130%(V), 0%(H)
-15%(H) 15%(H)
105%(V)
UP/DOWN
RIGHT/LEFT
H
H x 15%
V
H x 15%
V
V x 25%
Offset max=V x 30%
Offset min=V x 5%
18
User Controls
This graph is for user’s reference only.
Diagonal
length (inch) size
of 16:9 Screen
Screen Size W X H (16:9) Projection distance (D)
Offset
(Hd)
(m) (feet) (m) (feet)
Width Height Width Height wide tele wide tele (m) (feet)
30 0.66 0.37 2.18 1.23 - 1.51 - 4.97 0.11 0.37
45 1.00 0.56 3.27 1.84 1.49 2.27 4.88 7.45 0.17 0.55
50 1.11 0.62 3.63 2.04 1.65 2.52 5.43 8.28 0.19 0.61
60 1.33 0.75 4.36 2.45 1.98 3.03 6.51 9.93 0.22 0.74
70 1.55 0.87 5.08 2.86 2.32 3.53 7.60 11.59 0.26 0.86
80 1.77 1.00 5.81 3.27 2.65 4.04 8.68 13.24 0.30 0.98
90 1.99 1.12 6.54 3.68 2.98 4.54 9.77 14.90 0.34 1.10
100 2.21 1.25 7.26 4.09 3.31 5.05 10.85 16.55 0.37 1.23
120 2.66 1.49 8.72 4.90 3.97 6.05 13.02 19.86 0.45 1.47
150 3.32 1.87 10.89 6.13 4.96 7.57 16.28 24.83 0.56 1.84
200 4.43 2.49 14.53 8.17 6.61 10.09 21.70 33.11 0.75 2.45
300 6.64 3.74 21.79 12.26 9.92 15.14 32.55 49.66 1.12 3.68
Screen Height
(H)
100%
5%
30%
Distance
(L)
Screen
Maximum Shift
25%
15%W 15%W
Left Side Right Side
Screen Width
(W)
130%(V), 0%(H)
-15%(H) 15%(H)
105%(V)
UP/DOWN
RIGHT/LEFT
H
H x 15%
V
H x 15%
V
V x 25%
Offset max=V x 30%
Offset min=V x 5%
▀■ PureShift Range Diagram
Adjusting Projection Image Size
English
19
User Controls
Image-Shift
Menu
Mode
Edge Mask
Overscan
16:9
4:3
Letter-Box
Native
HDMl1 HDMl 2
S-Video
Vide o
YPbPr
DVI
/
Re-S ync
VGA
Screen
UP
DOWN
Brightness Power Off
Power On
Contrast PureEngine
DB
Brite Mode
PURE
Using the Remote Control
Power On
Refer to the “Power On the Projector”
section on page 13.
Brightness
Adjust the brightness of the image.
Power Off
Refer to the “Power Off the Projector”
section on page 14.
Contrast
Control the degree of difference between
the lightest and darkest parts of the
picture.
PureEngine
The PureEngine is a collection of ad-
vanced image processing technologies
that enhances the quality of the displayed
image.
DynamicBlack
Enable the projector to automatically
optimize the display of dark movie scenes
enabling them to be shown in incredible
detail. (refer to page 26)
/
Brite Mode
Increase the brightness of the image.
(refer to page 34)
Image-Shift
Shift the projected image position verti-
cally.
Enter
Conrm your item selection.
Four Directional
Select Keys
Use directional select keys to select items
or make adjustments to your selection.
Menu
Display or exit the on-screen display
menus for projector.
Mode
Select the display mode from Cinema,
Bright, Photo, Reference and User.
Overscan
Mask off a few pixels on each edge of the
image to be displayed. Use the function
to adjust if image source happens to have
noise near any edge of the display image.
Power
OnOff
MENU
Re-Sync
Source
Image Shift
Remote Control
20
User Controls
Edge Mask
Choose “On” to mask off a few pixels on
each edge of the image to be displayed.
Use Edge Mask “On” if image source
happens to have encoding error near any
edge of the displayable image.
Up
Use this button to screen up.
Down
Use this button to screen down.
4:3
Scale the image at a 4:3 aspect ratio.
Letter Box
Enable the viewing of the letterboxed
nonanamorphically enhanced movie at
full screen width. Part of the original im-
age will be lost if the image aspect ratio is
less than 2.35:1..
Re-Sync
Automatically synchronize the projector to
the input source.
16:9
Scale the image at a 16:9 aspect ratio.
Native
The input source will be displayed without
scaling.
VGA
Press “VGA” to choose source from
VGA connector.
HDMI 1
Press “HDMI 1” to choose source from
HDMI 1 connector.
HDMI 2
Press “HDMI 2” to choose source from
HDMI 2 connector.
DVI
Press “DVI” to choose Analog and Digital
signal source from DVI connector.
YPbPr
Press “YPbPr” to choose Component
Video source.
S-Video
Press “S-Video” to choose S-video
source.
Video
Press “Video” to choose Composite Video
source.
Source
Press “Source” to choose DVI, RGB,
Component, S-Video, Composite Video,
and HDMI source.
Image-Shift
Menu
Mode
Edge Mask
Overscan
16:9
4:3
Letter-Box
Native
HDMl1 HDMl 2
S-Video
Vide o
YPbPr
DVI
/
Re-S ync
VGA
Screen
UP
DOWN
Brightness Power Off
Power On
Contrast PureEngine
DB
Brite Mode
PURE
Power
OnOff
MENU
Re-Sync
Source
Image Shift
English
21
User Controls
The Projector has multilingual On-screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or
Control Panel.
2 When OSD is displayed, use keys to select any item in the
main menu. While making a selection on a particular page, press
or “Enter” key to enter sub menu.
3. Use keys to select the desired item and adjust the settings
by key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Enter” or “Menu” to conrm, and the screen will return to the
main menu.
6. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
On-screen Display Menus
Main Menu
Setting
Sub Menu
22
User Controls
Menu Tree
%ULJKW0RGH
2Q2II
1R<HV
2Q/%;1DWLYH2II$XWR
2Q2II
2Q2II
97ULJJHU%
3URMHFWLRQ
+'0,+'0,'9,'9*$&RPSRQHQW69LGHR9LGHR
(QJOLVK'HXWVFK)UDQ©DLV,WDOLDQR(VSD³RO3RUWXJX¬V
3ROVNL1HGHUODQGV̷͚͑͘͘͏͐6XRPL6YHQVND
1RUVN'DQVNˢ˨˨ˤ˪˦˧˙0DJ\DU ÎHģWLQD ₼㠖僐浣
₼㠖丏⇢㡴㦻崭뼑霢꽩᧒ᥱᦎᦫ7¾UN©H
/DQJXDJH
,0$*(
0RGH
&RQWUDVW
6KDUSQHVV
&RORU
7LQW
,0$*(_$'9$1&('
'\QDPLF%ODFN
3XUH(QJLQH'HPR
3XUH'HWDLO
3XUH0RWLRQ
&RORU7HPS
,0$*(_$'9$1&('_3XUH(QJLQH
9,PDJH6KLIW
5*%*DLQ%LDV
6XSHU:LGH
7HVW3DWWHUQ
2Q2II$872
/%;1DWLYH
6<67(0_/$036(77,1*6
%DFNJURXQG&RORU
0HQX/RFDWLRQ
3XUH&RORU
&LQHPD%ULJKW3KRWR5HIHUHQFH8VHU
%ULJKWQHVV
$
GYDQFHG
:DUP0HGLXP&ROG
2II&LQHPD&LQHPD
5HG*DLQ*UHHQ*DLQ%OXH*DLQ5HG%LDV*UHHQ%LDV%OXH
%LDV5HVHW
3XUH(QJLQH
)LOP9LGHR*UDSKLFV6WDQGDUG
2Q2II
/DPS+RXUV
1RQH*ULG:KLWH3DWWHUQ
'DUN%OXH%ODFN*UD\
*DPPD
%:([WHQVLRQ
1RLVH5HGXFWLRQ
/DPS5HPLQGHU 2Q2II
(GJH0DVN
)RUPDW
2YHUVFDQ
9.H\VWRQH
/DPS6HWWLQJV
,QSXW6RXUFH
/DPS5HVHW
6(783
',63/$<
6<67(0
97ULJJHU$
,PDJH$,
2Q2II
3KDVH7UDFNLQJ+3RVLWLRQ93RVLWLRQ
$
XWR3RZHU2IIPLQ
6LJQDO
6RXUFH/RFN
5HVHW &XUUHQW$OO
+LJK$OWLWXGH 2Q2II
:KLWH/HYHO%ODFN/HYHO6DWXUDWLRQ+XH,5(
&RORU6SDFH 5*%<&E&U
English
23
User Controls
Image
Mode
There are many factory presets optimized for various types of im-
ages.
Cinema: For home theater.
Bright: Maximum brightness input.
Photo: Optimized for displaying photographic images.
Reference: This mode is intended to reproduce, as close as
possible, the image the way the movie director intended. Color,
color temperature, brightness, contrast and gamma settings are
all congured to standard reference levels.
User: User’s settings.
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
Press the to decrease the contrast.
Press the to increase the contrast.
Brightness
Adjust the brightness of the image.
Press the to darken image.
Press the to lighten the image.
24
User Controls
Color
Adjust a video image from black and white to fully saturated color.
Press the to decrease the color saturation in the image.
Press the to increase the color saturation in the image.
Tint
Adjust the color balance of red and green.
Press the to increase the amount of green in the image.
Press the to increase the amount of red in the image.
Sharpness
Adjust the sharpness of the image.
Press the to decrease the sharpness.
Press the to increase the sharpness.
English
25
User Controls
Image | Advanced
Noise Reduction
The motion Adaptive Noise Reduction reduces the amount of vis-
ible noise interlaced signals. The range is from “0” to “10”. (0:Off)
Gamma
This allows you to set up gamma curve type. After the initial setup
and ne tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
Film: for home theater.
Video: for video or TV source.
Graphics: for image source.
Standard: for standardized setting.
B/W Extension
Black and White Extension can stretch the black and white levels
to automatically increase the contrast of input image. This unit has
2 pre-set modes that allow the user to switch among the pre-sets
to obtain different image effects. (Off/On)
Color Temp
If set to cold temperature, the image looks bluish (cold image). If
set to warm temperature, the image tends to looks reddish (warm
image).
26
User Controls
PureEngine
The PureEngine is a collection of advanced image processing
technologies that enhances the quality of the displayed image.
DynamicBlack
DynamicBlack enables the projector to automatically optimize the
display of dark movie scenes enabling them to be shown in incred-
ible detail.
RGB Gain/Bias
Press into the next menu as below and then use or to se-
lect item. Use or to select Red, Green, or Blue for brightness
(Gain) and contrast (Bias).
English
27
User Controls
Image | Advanced
| PureEngine
PureDetail
PureDetail is an edge enhancement tool that enables the edges in
the projected image is be enhanced thus providing more perceived
detail.
PureColor
This adjustable item utilizes a new color-processing algorithm and
enhancements to enable the picture’s vividness to be signicantly
increased. The range is from “0” to “5”.
PureMotion
PureMotion uses sophisticated algorithms to ensure that the natu-
ral motion in the image is preserved.
PureEngine Demo
This feature enables you to see the difference in the image quality
between the raw unprocessed image and the image processed as
processed by the PureEngine. Use this mode to check the adjust-
ments that you make to the PureEngine settings.
28
User Controls
Format
Use this function to choose your desired aspect ratio.
4:3: This format is for 4x3 input sources.
16:9: This format is for 16x9 input sources, like HDTV and DVD
enhanced for Widescreen TV.
Native: This format displays the original image without any scal-
ing.
Display
Input Signal
Display area
Picture area
Display on Screen
English
29
User Controls
LBX: This format is for non-16x9, letterbox source and for users
who use external anamorphic lens to display 2.35:1 aspect ratio
using full resolution.
Detail informations about LBX mode :
1. Some Letter-Box DVDs are not enhanced for 16x9 TVs. In
this situation, the image will not look right when displayed in
16:9 mode.
In this situation, please try to using the 4:3 mode to view the
DVD.
If the content is not 4:3, there will be black bars around the
image in 16:9 display. For this type of content, you can use
LBX mode to ll the image on the 16:9 display.
2. If you use an external anamorphic lens, this LBX mode also
allows you to watch a 2.35:1 content (include Anamorphic
DVD and HDTV lm source) that support anamorphic wide is
enhanced for 16x9 Display in a wide 2.35:1 image.
In this case, there are no black bars. Lamp power and verti-
cal resolution are fully utilized.
Overscan
Overscan function removes the noise in a video image. Overscan
the image to remove video encoding noise on the edge of video
source.
Edge Mask
Press the to reduce the size of an image.
Press the to magnify an image on the projection screen.
V Image Shift
Shift the projected image position vertically.
V Keystone
Press the or to adjust image distortion vertically and make a
squarer image.
Each I/O has differ-
ent setting of “Over-
scan”.
Note
Note
30
User Controls
“SuperWide“ is Off“
as default.
How to use “Super-
Wide”
1. Obtain a 2.0:1 aspect
ratio screen
2. Switch SuperWide
ON
3. Align the projector
image correctly on
the screen
4. Enjoy movies without
black bars
Note
Note
SuperWide
SuperWide is a feature that uses a special 2.0:1 aspect ratio
screen enabling both 16:9 and 2.35:1 aspect ratio movies to be
shown without black bars at the top and bottom of the screen
Off: Your desired aspect ratio can be selected - 4:3, 16:9, LBX
and Native.
On: Only formats 4:3 and 16:9 can be selected.
Auto: To solve the differences of the lm formats, the option can
keep the format in the same ratio.
English
31
User Controls
Menu Location
Choose the menu location on the display screen.
Projection
Front-Projection
This is the default selection. The image is projected straight on
the screen.
Rear-Desktop
When selected, the image will appear reversed.
Front-Ceiling
When selected, the image will turn upside down.
Rear-Ceiling
When selected, the image will appear reversed in upside down
position.
Image AI
Image AI improves the contrast of the picture by optimizing the
brightness of the lamp according to the picture content.
System
Rear-Desktop and
Rear-Ceiling are to be
used with a translucent
screen.
Note
Note
32
User Controls
On: The dynamic image performance manager is active in mak-
ing sure your greatest pleasure from seeing a movie dynami-
cally with the most dark details revealed, vivid and bright image
performed all the way.
Off: The dynamic image performance manager is on standby.
Test Pattern
Display a test pattern. There are Grid, White pattern and None.
Background Color
Use this feature to display a “Dark Blue”, “Black”, or “Gray” screen
when no signal is available.
12V Trigger A
12V trigger A provides a standard trigger for motorized screens.
12V Trigger B
English
33
User Controls
Off: disables the trigger.
On: enables the trigger and the programmable sub-menu. The
sub-menu is accessed by selecting the ON option then press-
ing the ENTER button on the remote control. Checking an op-
tion in the sub-menu will activate the trigger when the selected
display mode is selected. In the example below 16:9 has been
selected – this means that Trigger B will be active when the
projector display mode is set to 16:9. The trigger will be inactive
for all the other display mode options.
Auto235: When AUTO235 is enabled the projector will automat-
ically detect when a 2.35:1 ratio presentation is being shown
and will activate the trigger on this port which, in turn, can be
used to activate a motorised anamorphic lens assembly. The
AUTO235 setting and a motorised anamorphic lens assembly
can be used in this way to provide a fully automated “Constant
Height” projection system
34
User Controls
Lamp Hour
Display the cumulative lamp operating time.
Lamp Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed. The message will
appear up 30 hours before suggested replacement of lamp.
Bright Mode
Choose “On” to increase the brightness. Choose “Off” to return
normal mode.
Lamp Reset
Reset the lamp life hour after replacing the lamp.
System | Lamp
Settings
English
35
User Controls
Language
Choose the multilingual OSD menu. Press or into the sub
menu and then use the or key to select your preferred lan-
guage. Press “Select (Enter)” to nalize the selection.
Input Source
Enable input sources. Press or into the next menu as below
and then use or to select. Press “Select (Enter)” to nalize
the selection. The projector will not search inputs that are de-se-
lected.
Setup
36
User Controls
Source Lock
When this function is turned off, the projector will search for other
signals if the current input signal is lost. When this function is
turned on, it will search for a specied connection port.
High Altitude
Choose “On” to turn on High Altitude mode. Operates the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Auto Power Off
Set the interval of power-off of the system, if there is no signal
input. (In minutes).
Signal
RGB/HDTV Source Video Source
Phase: Change the display data frequency to match the fre-
quency of your computer’s graphic card. When you experience
a vertical ickering bar, use this function to make an adjust-
ment.
Tracking : Synchronize the signal timing of the display with the
graphics card. If you experience an unstable or ickering im-
age, use this function to correct it.
H Position: Adjust the horizontal position.
V Position: Adjust the vertical position.
“Signal” is not sup-
ported when the source
is HDMI or DVI-D.
Note
Note
English
37
User Controls
White Level : Allow user adjust White Level when inputting
SVideo or Video/CVBS signals.
Black Level : Allow user adjust Black Level when inputting
SVideo or Video/CVBS signals.
Saturation : Adjust a video image from black and white to fully
saturated color. Press the to decrease the amount of color in
the image. Press the to increase the amount of color in the
image.
Hue : Adjust the color balance of red and green. Press the
to increase the amount of green in the image. Press the to
increase the amount of red in the image.
IRE : Adjust measurement of composite video signals.
Color Space
Select an appropriate color matrix type from RGB or YCbCr.
Reset
Return the adjustments and settings to factory default values.
Current : Return the current menu’s settings to factory default.
All : Return the settings for all menus to factory default values.
“IRE” is only supported
on NTSC signal.
Note
Note
38
Appendices
Image Problems
No image appears on-screen
Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the “Replacing the Lamp” section.
Make sure you have removed the lens cap and the projector is
switched on.
Image is out of focus
Make sure the Lens cap is removed.
Adjust the Focus Ring on the projector lens.
Make sure the projection screen is between the required distance
4.9 to 32.8 feet (1.5 to 10.0 meters) from the projector. See page
18.
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will
show the best image in 16: 9 format on projector side.
If you play the LBX format DVD title, please change the format as
LBX in projector OSD.
If you play 4:3 format DVD title, please change the format as 4:3 in
projector OSD.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
Please setup the display format as 16:9 (wide) aspect ratio type on
your DVD player.
Troubleshooting
If you experience a problem with your projector,
please refer to the following information. If a prob-
lem persists, please contact your local reseller or
service center.
English
39
Appendices
Image is too small or too large
Adjust the zoom lever on the top of the projector.
Move the projector closer to or further from the screen.
Press [Menu] on the projector panel, go to “Display-->Format”. Try
the different settings.
Image has slanted sides:
If possible, reposition the projector so that it is centered on the
screen and below the bottom of the screen.
Use “Display-->V Keystone” from the OSD to make an adjustment.
Image is reversed
Select “System-->Projection” from the OSD and adjust the projec-
tion direction.
Other Problems
The projector stops responding to all controls
If possible, turn off the projector, then unplug the power cord and
wait at least 20 seconds before reconnecting power.
Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the “Replacing the Lamp” section on
page 42.
40
Appendices
Projector Status Indication
LED states
Message
Power LED
(Red)
Power LED
(Blue)
Temp-LED
(Red)
Lamp-LED
(Orange)
Standby State
(Input power cord)
Standby State
(Burn in mode)
Flashing
Power on and Lamp
lighting
*
Power off (Cooling)
Error (Lamp fail)
Error (Thermal fail)
Error (Fan fail)
Flashing
Error (Over Temp.)
Steady light =>
No light =>
Note
Note
* Power LED be ON when OSD appears, be OFF when OSD disappears.
POWER
TEMP
LAMP
STANDBY
POWER
TEMP
LAMP
STANDBY
English
41
Appendices
On Screen Messages
Fan failed:
The projector will switch off automatically.
Over temperature:
The projector will switch off automatically.
Replacing the lamp:
Lamp is approaching the end of it’s rated life.
Replcement suggested.
Remote Control Problems
If the remote control does not work
Check the operating angle of the remote control is within ±25° both
horizontally and vertically of on of the IR receivers on the projector.
Make sure there are not any obstructions between the remote con-
trol and the projector. Move to within 6 m (20 ft) of the projector.
Make sure batteries are inserted correctly.
Replace batteries if they are exhausted.
42
Appendices
Replacing the Lamp
The projector automatically detects the lamp life. When the
lamp life is nearing the end of use, you will receive a warning
message.
When you see this message, please contact your local
reseller or service center to change the lamp as soon as
possible. Make sure the projector has been cooled down for
at least 30 minutes before changing the lamp.
Warning: Lamp compartment is hot! Allow it to cool down before
changing lamp!
Warning: To reduce the risk of personal injury, do not drop the lamp
module or touch the lamp bulb. The bulb may shatter and cause
injury if it is dropped.
English
43
Appendices
Lamp Replacing Procedure:
1. Switch off the power to the projector by pressing the Power
button.
2. Allow the projector to cool down at least 30 minutes.
3. Disconnect the power cord.
4. Unlock the lamp cover.
5. Push up and remove the cover.
6. Use a screwdriver to remove the screw from the lamp mod
-
ule.
7. Pull out the lamp module.
To replace the lamp module, reverse the previous steps.
8. Turn on the projector and do “Lamp Reset” after the lamp
module is replaced.
Lamp Reset: (i)Press “Menu” -> (ii)Select “System” ->
(iii)Select “Lamp Settings” ->(iv)Select “Lamp Reset” ->
(v)Select “Yes”.
2
1
4
3
44
Appendices
Compatibility Modes
Mode Resolution
V.Frequency
(Hz)
AAnalog Digital
SVGA
800 x 600 56
800 x 600 60
800 x 600 72
800 x 600 75
800 x 600 85
XGA
1024 x 768 60
1024 x 768 70
1024 x 768 75
1024 x 768 85
WXGA
1280 x 768 60
1280 x 800 60
HD
1280 x 720 60
1280 x 1024 60
1280 x 1024 75
1920 x 1080 24
1920 x 1080 60
SXGA+ 1400 x 1050 60
UXGA 1600 x 1200 60
Power Book G4
SVGA 800 x 600 60
800 x 600 75
800 x 600 85
XGA 1024 x 768 60
1024 x 768 70
1024 x 768 75
1024 x 768 85
WXGA 1280 x 768 60
HD 1280 x 720 60
1280 x 1024 60
1280 x 1024 75
SXGA+ 1400 x 1050 60
UXGA 1600 x 1200 60
iMAC
XGA 1024 x 768 60
English
45
Appendices
RS232 Commands and Protocol
Function List
Pin no. Name I/O (From Projector Side)
1 NC __
2 RXD IN
3
TXD
OUT
4 NC __
5 NC __
6 NC __
7 RS232 RTS
8 RS232 CTS
9 NC __
RS232 Pin Assignments
31 5
6
9
46
Appendices
RS232 Protocol Function List
RS232 Command Table.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Baud Rate : 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control : None
UART16550 FIFO: Disable
Projector Return (Pass): P
Projector Return (Fail): F XX=01-99, projector's ID, XX=00 is for all projectors
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SEND to projector Note : There is a <CR> after all ASCII commands
0D is the HEX code for <CR> in ASCII code
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
232 ASCII Code HEX Code Function Description
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX00 1 7E 30 30 30 30 20 31 0D Power ON
~XX00 2 7E 30 30 30 30 20 32 0D Power OFF
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX01 1 7E 30 30 30 31 20 31 0D Resync
~XX12 1 7E 30 30 31 32 20 31 0D HDMI 1
~XX12 15 7E 30 30 31 32 20 31 35 0D HDMI 2
~XX12 2 7E 30 30 31 32 20 32 0D DVI
~XX12 14 Component YPbPr
~XX12 5 7E 30 30 31 32 20 35 0D VGA
~XX12 7 7E 30 30 31 32 20 37 0D Direct Source Selection VGA SCART
~XX12 8 7E 30 30 31 32 20 38 0D VGA Component
~XX12 9 7E 30 30 31 32 20 39 0D S-video
~XX12 10 7E 30 30 31 32 20 31 30 0D Video
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX20 1 7E 30 30 32 30 20 31 0D Display Mode Cinema
~XX20 2 7E 30 30 32 30 20 32 0D Bright
~XX20 3 7E 30 30 32 30 20 33 0D Photo
~XX20 4 7E 30 30 32 30 20 34 0D Reference
~XX20 5 7E 30 30 32 30 20 35 0D User
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX21 n 7E 30 30 32 31 20 a 0D Brightness n= 0 (a=30) - +100 (a=31 30 30)
~XX22 n 7E 30 30 32 32 20 a 0D Contrast n= 0 (a=30) - +100 (a=31 30 30)
~XX23 n 7E 30 30 32 33 20 a 0D Sharpness n= 1 (a=31) - +15 (a=31 35)
~XX44 n 7E 30 30 34 34 20 a 0D Color n= 0 (a=30) - +100 (a=31 30 30)
~XX45 n 7E 30 30 34 35 20 a 0D Tint n= 0 (a=30) - +100 (a=31 30 30)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX196 n 7E 30 30 31 39 36 20 a 0D Image/Advanced Noise Reduction n= 0 (a=30) - 10 (a=31 30)
~XX35 1 7E 30 30 33 35 20 31 0D Image/Advanced/Gamma Film
~XX182 n 7E 30 30 31 38 32 20 a 0D Curve Type n=-7 (a=2D 37) - +7 (a=37)
~XX183 n 7E 30 30 31 38 33 20 a 0D Offset n=-5 (a=2D 35) - +5 (a=35)
~XX35 2 7E 30 30 33 35 20 32 0D Video
~XX184 n 7E 30 30 31 38 34 20 a 0D Curve Type n=-7 (a=2D 37) - +7 (a=37)
~XX185 n 7E 30 30 31 38 35 20 a 0D Offset n=-5 (a=2D 35) - +5 (a=35)
~XX35 3 7E 30 30 33 35 20 33 0D Graphics
~XX186 n 7E 30 30 31 38 36 20 a 0D Curve Type n=-7 (a=2D 37) - +7 (a=37)
~XX187 n 7E 30 30 31 38 37 20 a 0D Offset n=-5 (a=2D 35) - +5 (a=35)
~XX35 4 7E 30 30 33 35 20 34 0D Standard
~XX188 n 7E 30 30 31 38 38 20 a 0D Curve Type n=-7 (a=2D 37) - +7 (a=37)
~XX189 n 7E 30 30 31 38 39 20 a 0D Offset n=-5 (a=2D 35) - +5 (a=35)
~XX43 n 7E 30 30 34 33 20 a 0D B/W Extension n= Off /On (a=30/31)
~XX36 1 7E 30 30 33 36 20 31 0D Color Temp. Warm
~XX36 2 7E 30 30 33 36 20 32 0D Medium
~XX36 3 7E 30 30 33 36 20 33 0D Cold
~XX24 n 7E 30 30 32 34 20 a 0D RGB Gain\Bias Red Gain n= -50 (a=2D 35 30) - +50 (a=35 30)
~XX25 n 7E 30 30 32 35 20 a 0D Green Gain n= -50 (a=2D 35 30) - +50 (a=35 30)
~XX26 n 7E 30 30 32 36 20 a 0D Blue Gain n= -50 (a=2D 35 30) - +50 (a=35 30)
~XX27 n 7E 30 30 32 37 20 a 0D Red Bias n= -50 (a=2D 35 30) - +50 (a=35 30)
~XX28 n 7E 30 30 32 38 20 a 0D Green Bias n= -50 (a=2D 35 30) - +50 (a=35 30)
~XX29 n 7E 30 30 32 39 20 a 0D Blue Bias n= -50 (a=2D 35 30) - +50 (a=35 30)
~XX33 1 7E 30 30 33 33 20 31 0D Reset
~XX41 n 7E 30 30 34 31 20 a 0D Image/Advanced/PureEngine PureDetail n=Off/1/2/3 (a=30/31/32/33)
~XX42 n 7E 30 30 34 32 20 a 0D PureColour n=Off/1/2/3/4/5 (a=30/31/32/33/34/35)
~XX190 n 7E 30 30 31 39 30 20 a 0D PureMotion n=Off/Low/Med/High (a=30/31/32/33/34)
~XX197 n 7E 30 30 31 39 37 20 a 0D Pure Demo n=Off/H Spilt/V Spilt=0/1 (a=30/31/32)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX39 1 7E 30 30 33 39 20 31 0D Input Source Filters HDMI 1
~XX39 7 7E 30 30 33 39 20 37 0D HDMI 2
~XX39 2 7E 30 30 33 39 20 32 0D DVI-D
~XX39 8 7E 30 30 33 39 20 38 0D Component
~XX39 5 7E 30 30 33 39 20 35 0D VGA
~XX39 9 7E 30 30 33 39 20 39 0D S-Video
~XX39 10 7E 30 30 33 39 20 31 30 0D Video
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX60 1 7E 30 30 36 30 20 31 0D Format 4:3
~XX60 2 7E 30 30 36 30 20 32 0D 16:9
~XX60 5 7E 30 30 36 30 20 35 0D LBX
~XX60 6 7E 30 30 36 30 20 37 0D Native
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX61 n 7E 30 30 36 31 20 a 0D Overscan n= 0 (a=30) – 4 (a=34)
~XX62 n 7E 30 30 36 32 20 a 0D Edge masking n=0 (a=30) -5 (a=35)
~XX64 n 7E 30 30 36 34 20 a 0D V Image Shift n= -50 (a=2D 35 30) - +50 (a=35 30)
~XX66 n 7E 30 30 36 36 20 a 0D V Keystone n= -16 (a=2D 31 36) - +16 (a=31 36)
~XX199 n 7E 30 30 31 39 39 20 a 0D SuperWide n=0ff/On/Auto (a=30/31/32)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX70 1 7E 30 30 37 30 20 31 0D Language English
~XX70 2 7E 30 30 37 30 20 32 0D German
~XX70 3 7E 30 30 37 30 20 33 0D French
~XX70 4 7E 30 30 37 30 20 34 0D Italian
~XX70 5 7E 30 30 37 30 20 35 0D Spanish
~XX70 6 7E 30 30 37 30 20 36 0D Portuguese
~XX70 7 7E 30 30 37 30 20 37 0D Polish
~XX70 8 7E 30 30 37 30 20 38 0D Dutch
~XX70 9 7E 30 30 37 30 20 39 0D Swedish
~XX70 10 7E 30 30 37 30 20 31 30 0D Norwegian/Danish
~XX70 11 7E 30 30 37 30 20 31 31 0D Finnish
~XX70 12 7E 30 30 37 30 20 31 32 0D Greek
~XX70 13 7E 30 30 37 30 20 31 33 0D Traditional Chinese
~XX70 14 7E 30 30 37 30 20 31 34 0D Simplified Chinese
~XX70 15 7E 30 30 37 30 20 31 35 0D Japanese
~XX70 16 7E 30 30 37 30 20 31 36 0D Korean
English
47
Appendices
~XX70 17 7E 30 30 37 30 20 31 37 0D Russian
~XX70 18 7E 30 30 37 30 20 31 38 0D Hungarian
~XX70 19 7E 30 30 37 30 20 31 39 0D Czechoslovak
~XX70 20 7E 30 30 37 30 20 32 30 0D Arabic
~XX70 21 7E 30 30 37 30 20 32 31 0D Thai
~XX70 22 7E 30 30 37 30 20 32 32 0D Turkish
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX71 1 7E 30 30 37 31 20 31 0D Projection Front-Desktop
~XX71 2 7E 30 30 37 31 20 32 0D Rear-Desktop
~XX71 3 7E 30 30 37 31 20 33 0D Front-Ceiling
~XX71 4 7E 30 30 37 31 20 34 0D Rear-Ceiling
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX72 1 7E 30 30 37 32 20 31 0D Menu Location Top Left
~XX72 2 7E 30 30 37 32 20 32 0D Top Right
~XX72 3 7E 30 30 37 32 20 33 0D Center
~XX72 4 7E 30 30 37 32 20 34 0D Bottom Left
~XX72 5 7E 30 30 37 32 20 35 0D Bottom Right
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX106 n 7E 30 30 31 30 36 20 a 0D Auto Power Off (min) n=0 (a=30)-60 (a=36 30) (multiple of 5)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX37 2 7E 30 30 33 37 20 32 0D Color Space RGB
~XX37 3 7E 30 30 33 37 20 33 0D YCbCr
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX73 n 7E 30 30 37 33 20 a 0D Signal Tracking n= 0 (a=30) –200 (a=32 30 30)
~XX74 n 7E 30 30 37 34 20 a 0D Phase n= 0 (a=30) – 100 (a=31 30 30)
~XX75 n 7E 30 30 37 35 20 a 0D H. Position n= 0 (a=30) – 100 (a=31 30 30)
~XX76 n 7E 30 30 37 36 20 a 0D V. Position n= 0 (a=30) – 100 (a=31 30 30)
~XX200 n 7E 30 30 32 30 30 20 a 0D Black Level n=0 (a=30) -100 (a=31 30 30)
~XX201 n 7E 30 30 32 30 31 20 a 0D White Level n=0 (a=30) -100 (a=31 30 30)
~XX202 n 7E 30 30 32 30 32 20 a 0D Saturation n= 0 (a=30) – 100 (a=31 30 30)
~XX203 n 7E 30 30 32 30 33 20 a 0D Hue n= 0 (a=30) – 100 (a=31 30 30)
~XX204 n 7E 30 30 32 30 34 20 a 0D IRE n=0/7.5 (a=30/31)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX100 1 7E 30 30 31 30 30 20 31 0D Source Lock On
~XX100 2 7E 30 30 31 30 30 20 32 0D Off
~XX191 n 7E 30 30 31 39 31 20 a 0D DynamicBlack n=Off/Cinema 1/Cinema 2=1(a=30/31/32)
~XX192 n 7E 30 30 31 39 32 20 a 0D 12V Trigger A n=On/Off (a=30/31)
~XX193 n 7E 30 30 31 39 33 20 a 0D 12V Trigger B n=Off/On/AUTO235 (a=30/31/32)
~XX205 n 7E 30 30 32 30 35 20 a 0D AUTO235 n=4:3/16:9/LBX/ Native (a=31/32/35/36)
~XX104 1 7E 30 30 31 30 34 20 31 0D Background Color Dark Blue
~XX104 2 7E 30 30 31 30 34 20 32 0D Black
~XX104 3 7E 30 30 31 30 34 20 33 0D Gray
~XX194 n 7E 30 30 31 39 34 20 a 0D Image AI n=On/Off (a-31/32)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX108 1 7E 30 30 31 30 38 20 31 0D Lamp Setting Lamp Hour
~XX109 1 7E 30 30 31 30 39 20 31 0D Lamp Reminder On
~XX109 2 7E 30 30 31 30 39 20 32 0D Off
~XX110 1 7E 30 30 31 31 30 20 31 0D Brite Mode On
~XX110 2 7E 30 30 31 31 30 20 32 0D Off
~XX111 1 7E 30 30 31 31 31 20 31 0D Lamp Reset Yes
~XX111 2 7E 30 30 31 31 31 20 32 0D No
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX112 1 7E 30 30 31 31 32 20 31 0D Reset Yes
~XX112 2 7E 30 30 31 31 32 20 32 0D No
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SEND from projector automatically
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
232 ASCII Code HEX Code Function Projector Return Description
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
when Standby/Warming/Cooling/Out of Range/Lamp fail INFOn n : 0/1/2/3/4 = Standby/Warming/Cooling/Lamp fail
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
READ from projector
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
232 ASCII Code HEX Code Function Projector Return Description
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX121 1 7E 30 30 31 32 31 20 31 0D Input Source Commands OKn n: 0/1/2/3/4/5/6/7/8
= None/HDMI 1/HDMI 2/DVI/Component/VGA/S-Video/Video
~XX122 1 7E 30 30 31 32 32 20 31 0D Software Version OKaaaa
~XX123 1 7E 30 30 31 32 33 20 31 0D Display Mode OKn n: 0/1/2/3/4/5
=Cinema/ Bright/ Photo/ Reference/ User
~XX124 1 7E 30 30 31 32 34 20 31 0D Power State OKn n: 0/1=Off/On
~XX125 1 7E 30 30 31 32 35 20 31 0D Brightness OKn
~XX126 1 7E 30 30 31 32 36 20 31 0D Contrast OKn
~XX127 1 7E 30 30 31 32 37 20 31 0D Aspect Ratio OKn n: 0/1/2/3/4
=4x3, 16x9, LBX, Native
~XX128 1 7E 30 30 31 32 38 20 31 0D Color Temperature OKn n: 0/1/2=Warm/Medium/Cold
~XX129 1 7E 30 30 31 32 39 20 31 0D Projection Mode OKn n: 0/1/2/3
=Front-Desktop/Rear-Desktop/Front-Ceiling/Rear-Ceiling
~XX150 1 7E 30 30 31 35 30 20 31 0D Information OKabbbbcdddde a : 0/1=Off/On
bbbb: Lamp Hour
c: source 0/1/2/3/4
= None/HDMI 1/HDMI 2/DVI/Component/VGA/S-Video/Video
dddd: FW version
e : Display mode 0/1/2/3/4/5
=Cinema/ Bright/ Photo/ Reference/ User
~XX151 1 7E 30 30 31 35 31 20 31 0D Model Name OKn n : 0/1/2=HD82/HD82LV
~XX152 1 7E 30 30 31 35 32 20 31 0D RS232 Version No OKn
48
Appendices
Please note that dam-
age resulting from
incorrect installation will
invalidate the warranty.
Ceiling Mount Installation
1. To prevent damage to your projector, please use the
Optoma ceiling mount..
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attached a mount to the pro-
jector met the following specications:
Screw type: M6
Maximum screw length: 12mm
Minimum screw length: 10mm
Warning:
1. If you buy ceiling
mount from other
company, please
be sure to use the
correct screw size.
Screw size will be
different on different
mounts. It depends
on the plate thick-
ness.
2. Be sure to keep
at least 10cm gap
between the ceiling
and the bottom of the
projector.
3. Avoid installing the
projector near a heat
source.
Note
Note
220.00mm
(8.66”)
260.00mm
20.00mm
138.50mm
188.10mm
(10.23”)
(0.79”)
(5.45”)
(7.40”)
75.34mm
(2.97”)
370.90mm
(14.60”)
498.57mm
(19.63”)
81.19mm
(3.20”)
97.99mm
(3.86”)
120.00mm
(4.72”)
120.00mm
(4.72”)
English
49
Appendices
Optoma Global Ofces
For service or support please contact your local ofce.
USA
715 Sycamore Drive Tel : 408-383-3700
Milpitas, CA 95035, USA Fax: 408-383-3702
www.optomausa.com Service : services@optoma.com
Canada
5630 Kennedy Road, Mississauga,
ON, L4Z 2A9, Canada Tel : 905-361-2582
www.optoma.ca Fax: 905-361-2581
Europe
42 Caxton Way, The Watford Business Park
Watford, Hertfordshire,
WD18 8QZ, UK Tel : +44 (0) 1923 691 800
www.optoma.eu Fax: +44 (0) 1923 691 888
Service Tel : +44 (0)1923 691865 Service : service@tsc-europe.com
France
Bâtiment E Tel : +33 1 41 46 12 20
81-83 avenue Edouard Vaillant Fax: +33 1 41 46 94 35
92100 Boulogne Billancourt, France Service : savoptoma@optoma.fr
Spain
C/ José Hierro,36 Of. 1C Tel : +34 91 499 06 06
28529 Rivas VaciaMadrid, Fax: +34 91 670 08 32
Spain
Deutschland
Werftstrasse 25 Tel : +49 (0) 211 506 6670
D40549 Düsseldorf, Fax: +49 (0) 211 506 66799
Germany Service : info@optoma.de
Scandinavia
Grev Wedels Plass 2 Tel : +47 32 26 89 90
3015 Drammen Fax: +47 32 83 78 98
Norway Service : info@optoma.de
Latin America
715 Sycamore Drive Tel : 408-383-3700
Milpitas, CA 95035, USA Fax: 408-383-3702
www.optoma.com.br www.optoma.com.mx
50
Appendices
Taiwan
231,台北縣新店市民權路108號5樓
R.O.C. 傳真：+886-2-2218-2313
電話：+886-2-2218-2360 www.optoma.com.tw
服務處：services@optoma.com.tw asia.optoma.com
Hong Kong
Unit A, 27/F Dragon Centre, 79 Wing Hong Street,
Cheung Sha Wan Kowloon, Hong Kong
Tel : +852-2396-8968 Fax: +852-2370-1222
www.optoma.com.hk
China
上海市长宁区凯旋路1205号5楼 电话：+86-21-62947376
邮编: 200052 传真：+86-21-62947375
www.optoma.com.cn
Japan
東京都足立区綾瀬 3-25-18 サポートセンター:0120-46-5040
株式会社オーエスエム
E-Mail: info@osscreen.com http://www.os-worldwide.com/
Korea
WOOMI TECH.CO.,LTD.
4F, Minu Bldg.33-14, Nonhyun-Dong, Tel : +82+2+34430004
Kangnam-Ku, seoul, 135-815, KO-
REA
Fax: +82+2+34430005
English
51
Appendices
Regulation & Safety Notices
This appendix lists the general notices of your Projector.
FCC notice
This device has been tested and found to comply with the limits
for a Class B digital device pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
device generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not oc-
cur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be deter-
mined by turning the device off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
▀■
Reorient or relocate the receiving antenna.
▀■
Increase the separation between the device and re-
ceiver.
▀■
Connect the device into an outlet on a circuit different
from that to which the receiver is connected.
▀■
Consult the dealer or an experienced radio/television
technician for help.
Notice: Shielded cables
All connections to other computing devices must be made
using shielded cables to maintain compliance with FCC
regulations.
Caution
Changes or modications not expressly approved by the
manufacturer could void the user’s authority, which is
granted by the Federal Communications Commission, to
operate this projector.
52
Appendices
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received, in-
cluding interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian
ICES-003.
Remarque à l’intention des utilisateurs
canadiens
Cet appareil numerique de la classe B est conforme a la norme
NMB-003 du Canada.
Declaration of Conformity for EU countries
▀■
EMC Directive 2004/108/EC (including amendments)
▀■
Low Voltage Directive 2006/95/EC
▀■
R & TTE Directive 1999/5/EC (if product has RF func-
tion)
Disposal instructions
Do not throw this electronic device into the
trash when discarding. To minimize pollution
and ensure utmost protection of the global
environment, please recycle it.
… 52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma projector hd82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma projector hd82 in the language / languages: English as an attachment in your email.

The manual is 14,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info