475897

Optoma Pico PK120 Manual

4
Zoom out
Zoom in
Previous page
1/19
Next page
4
Ch a r g e t h e Ba t t e r y SW I t c h on / of f
co n n e c t In p u t So u r c e -
vI D e o I n
co n n e c t In p u t So u r c e Da t a t r a n S f e r
co n n e c t In p u t So u r c e - vga
4
1
1. Insert the plug. (
)
2. Connect the charger. (
~
)
3. During charging, the LED indicator
lights amber. (
)
The battery will not charge
while the projector is operating.
Turn the projector off.
4. The LED Charge Indicator lights
green when the battery is fully
charged. This process may take up
to 2.5 hours.
3
RESET
DC IN
UNIVERSAL I/O
4
RESET
DC IN
UNIVERSAL I/
O
2
RESET
DC IN
UNIVERSAL I/O
Press the Power button for 3 seconds to
switch the projector on or off.
For rst time use, the Language screen
appears.
1. Highlight the desired language.
( )
2. Select the item. ( )
RESET
DC IN
UNIVERSAL I/O
1
2
Connect the VGA device. (
~
)
Insert the universal connector
with the arrow mark facing up.
<Note>
1. For LED indicator information, see page
18.
2. After the projector is turned off, the
battery may not start charging right away
due to over temperature protection. The
projector will automatically start charging
once it cools off.
3. The battery has a lifespan and ages
every time it is charged and discharged. It
will gradually loose its charging capability as
it ages. Replace the battery at the end of its
lifespan.
In S e r t mI c r o SD ca r D
DC IN
RESET
micro SD
PK120 is designed to project image
from the internal memory or via a
microSD card.
Insert a microSD card into the slot
with the gold contacts facing down.
RESET
DC IN
UNIVERSAL I/O
1
2
Connect a laptop or PC using the
supplied Male USB Cable to transfer
data to the Projector internal memory
or the inserted microSD card. After
connecting, switch the projector on.
1. Connect the AV input source.
(
~
)
2. Connect external speakers to the
audio out connector of the projector.
(
)
<Note>
1. All other brand and product names are
trademarks or registered trademarks of their
respective companies.
2. The cables connecting the video output
devices are not supplied, please contact the
device vendor.
3. iPod nano/iPod touch/iPhone/iPod classic
(version 5 and above)
4. Designed for iPod/iPhone/Mobile phone/
PMP with TV out functions. Using with
devices with audio signal voltage > 0.3Vrms
is not recommended.
5. The optional USB cable for iPod
Connector is used to charge the iPod device
using a computer.
RESET
DC IN
UNIVERSAL I/O
3
RESET
DC IN
UNIVERSAL I/O
1
2
RESET
DC IN
UNIVERSAL I/
O
1
2
RESET
DC IN
UNIVERSAL I/O
1
2
or
or
<Note>
The laptop/PC can only detect the input
source when the projector is switched on.
The projection will stop when this connection
is made.
<Note>
To remove the microSD card, push the •
card to eject it from the slot.
Do not remove the microSD card while •
the projector is projecting image from
the card. This can cause data loss or
damage the card.
Supports microSD card size up to 32GB.•
When th
e L
ED indicator lights red,
the battery is low. Replace the battery
immediately or connect the power
adapter to charge the battery.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma Pico PK120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma Pico PK120 in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Optoma Pico PK120

Optoma Pico PK120 Quick start guide - English - 2 pages

Optoma Pico PK120 User Manual - German - 19 pages

Optoma Pico PK120 User Manual - French - 19 pages

Optoma Pico PK120 User Manual - Spanish - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info