676053
18
Zoom out
Zoom in
Previous page
1/53
Next page
English
18
USING THE PROJECTOR
Powering on / off the projector
OK
OK
or
Powering on
1. Connect one end of the power lead to the AC adapter and the AC adapter to the DC IN connector on
the projector.
2. Connect the other end of the power lead to the electrical outlet. When connected, the On/Standby LED
will turn red.
3. Connect the signal/source cable.
4. Turn on the projector by pressing the "
" button either on the projector or the remote control.
5. A start up screen will display in approximately 5 seconds and the On/Standby LED will turn solid blue.
Note: During start up, the touch control panel LED will be fl ashing blue.
Powering off
1. Turn off the projector by pressing the "
" button either on the projector or the remote control.
2. The following message will be displayed:
Power off?
PowerKey: OFF No operation: Cancel
3. Press the " " button again to con rm, otherwise the message will disappear after 5 seconds. When
you press the " " button for the second time, the projector will shut down.
4. The cooling fans will continue to operate for about 5 seconds for the cooling cycle. During the cooling
cycle, the On/Standby LED is solid red. If you wish to turn the projector back on, you must wait until
the cooling cycle has  nished and then simply press the "
" button again to turn on the projector.
5. Disconnect the AC adapter from the projector and the power lead from the electrical outlet.
Selecting an input source
The projector enables you to connect various input sources using cable connections, wireless network, Bluetooth,
or simply plugging in a SD card. For connecting sources to the projector, please refer to page 14.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma ML330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma ML330 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info