492720
32
Zoom out
Zoom in
Previous page
1/35
Next page
© Calibre UK Limited Issue 2.00 30 March 2012, W: www.calibreuk.com
T:+44 1274 394125 F: +44 1274 730960 E: techsupport@calibreuk..com 28
REMOTE CONTROL WEB SERVER
4.1.
Introduction
HQView-5xx features a web server which connects to a PC web browser via TCP/IP. The menu system
of HQView-5xx is mirrored into the web browser and all menu items can be accessed and controlled
through the keyboard or mouse of the PC.
4.2.
Installing the Software
No extra software needs to be installed on a PC. The PC web browser is used as the graphical user
interface for all control items. To connect to the HQView-5xx the TCP/IP address of the unit has to be
entered into the address list box of the web browser in the following format http://xxx.xxx.xxx.xxx. The
TCP/IP address assigned to HQView-5xx can be found in the System/Network Settings menu.
4.3.
Discovery Tool
Calibre provides a DiscoveryTool.exe Windows application to identify Calibre boxes in the network.
Clicking on the link of the recognized box will open a browser and make a connection to the
corresponding box. The box identifier is made up of “PV6S” in the case of HQView-5xx followed by the
6 least significant digits of the MAC address. The MAC address of the box can be found in the
System/Network Settings menu.
4.4.
Software Operation
Once the address has been entered into the web browser starts to load pages from the HQView-5xx
mirroring the menu system of the unit. All menu items are shown as their respective buttons, sliders
and list boxes and can be accessed and altered with the PC mouse or corresponding navigational key
presses. When changes within a submenu make other menu items available immediately when using
the on-screen menu of the HQView-5xx this has to be either done manually by clicking on the refresh
button of the web browser or is done with the next periodic auto refresh.
Various values are set by sliders. For fine increment of a slider value click on the slider and use the
mouse wheel to change the value in steps of 1. Click again and the value is applied.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma HQView-500 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma HQView-500 Series in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info