492720
29
Zoom out
Zoom in
Previous page
1/35
Next page
© Calibre UK Limited Issue 2.00 30 March 2012, W: www.calibreuk.com
T:+44 1274 394125 F: +44 1274 730960 E: techsupport@calibreuk..com 25
3.11. System
This selection contains functions which are more applicable to system operation than to picture
adjustment.
3.11.1. User
Settings: USER 1, 2, 3, 4
A predefined setting stored under a user name can be selected. Several settings of the HQView-5xx
can be stored under a user name. Thus, different users can store their preferred HQView-5xx settings
and recall these profiles by picking up their user name from this menu.
Note: Using the Web interface, (any number of) settings can also be stored/restored to/from a PC disc
drive.
3.11.2. Names/Profiles
The Names/Profiles menu provides input masks to rename the generic input channels and user
names. User names and input channel names can be changed to any word with a maximum of 12
alpha numeric characters with a value range of 0-9, A-Z and blank.
The Names/Profiles menu allows the user to store profiles under a certain user name. It also allows to
copy user profiles by loading a profile stored under one user name and save it under another user
name. Reset Profile allows to restore default HQView-5xx settings for the currently selected user.
3.11.3. Input Config
Inputs can be configured through the following sub-menus:
VGA Setup:
Submenu for adjusting analogue computer video. A button for automatic setup of frequency and phase
of the sampling clock is provided. This automatic adjustment is strongly recommended. Frequency
(Clock) and phase can also be altered manually.
DVI/HDMI Setup:
The DVI-I connector will accept either DVI-D or VGA analogue inputs. The DVI-I channel can be
configured accordingly.
The equalisation of the DVI interface can be boosted to allow for extended cable length.
The automatic HDMI and DVI Color Space and Range settings can be overwritten in this menu. Range
can be set to limited video mode or full range. The color space can be set to RGB or YCbCr.
SDI Setup:
For 3GSDI Level B type input modes the stream can be chosen.
SDI audio input is routed to the HDMI and 3GSDI output connector by default. HQView-5xx can also
be set to monitor audio on the SPDIF connector. SDI Audio on the HDMI/3GSDI connector and SPDIF
connector are mutually exclusive.
Two consecutive SDI audio channels can be output on the HDMI/3GSDI output interface. The group
can be chosen. Or all eight SDI audio channels can be transmitted.
Component Setup:
The component interface of the HQView-5xx is configured through this submenu. The Colour Space
can be set to YPbPr or RGB. The sync signal can be stripped from the Green or Y channel with the
setting 3 Wire or from the separate sync line with the setting 4 Wire. The Auto setting will automatically
detect a sync signal and set-up the HQView-5xx accordingly. This is set in under Synchronisation.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma HQView-500 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma HQView-500 Series in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info