543178
94
Zoom out
Zoom in
Previous page
1/101
Next page
Usage Notice ...................................................................................................................... 3
Safety Information ........................................................................................................................3
Class B emissions limits ................................................................................................................................... 3
Important Safety Instruction ........................................................................................................................... 3
Precautions .....................................................................................................................................5
Eye Safety Warnings .....................................................................................................................7
Introduction ....................................................................................................................... 8
Product Features ...........................................................................................................................8
Package Overview ........................................................................................................................9
Product Overview .......................................................................................................................10
Main Unit ......................................................................................................................................................... 10
Control Panel ...................................................................................................................................................11
Rear View.........................................................................................................................................................12
Remote Control ............................................................................................................................................... 13
Installation ........................................................................................................................ 14
Connecting the Projector ............................................................................................................14
Connect to Computer / Notebook ............................................................................................................... 14
Connect to Video Sources ..............................................................................................................................15
Installing or Removing the Optional Lens ..............................................................................16
Removing the Existing Lens From the Projector .......................................................................................16
Installing the New Lens ................................................................................................................................. 17
Powering On/Off the Projector ................................................................................................18
Powering On the Projector ............................................................................................................................18
Powering Off the Projector ............................................................................................................................20
Warning Indicator ..........................................................................................................................................20
Adjusting the Projected Image ..................................................................................................21
Adjusting the Projector’s Height .................................................................................................................. 21
Adjusting Projected Image Position Using Lens Shift ...........................................................21
Adjusting the vertical image position .........................................................................................................22
Adjusting the horizontal image position ....................................................................................................23
Lens Shift Range Diagram .............................................................................................................................23
Adjusting the Zoom / Focus .........................................................................................................................24
Adjusting Projection Image Size (XGA) ...................................................................................................... 25
Adjusting Projection Image Size (WXGA) .................................................................................................. 26
Adjusting Projection Image Size (WUXGA) ............................................................................................... 27
User Controls ................................................................................................................... 28
Control Panel ...............................................................................................................................28
Remote Control ...........................................................................................................................29
On-screen Display Menus ..........................................................................................................31
How to operate ...............................................................................................................................................31
Menu Tree ........................................................................................................................................................ 32
Image ............................................................................................................................................34
Display ..........................................................................................................................................40
Setup .............................................................................................................................................43
Options .........................................................................................................................................56
LAN_RJ45 .....................................................................................................................................65
Table of Contents
Table of Contents
Appendices ...................................................................................................................... 75
Troubleshooting ..........................................................................................................................75
Image Problems ..............................................................................................................................................75
Intermission Problems ...................................................................................................................................77
HDMI Q & A ...................................................................................................................................................78
Projector Status Indication ............................................................................................................................79
Remote Control Problems .............................................................................................................................80
Audio Problems ..............................................................................................................................................80
Replacing the Lamp .......................................................................................................................................81
Cleaning the Projector ................................................................................................................83
Compatibility Modes ..................................................................................................................84
Video Compatibility ....................................................................................................................................... 84
Video timing detail describe .........................................................................................................................84
Computer Compatibility - VESA standards ............................................................................................... 85
RS232 Commands .......................................................................................................................88
RS232 Protocol Function List .....................................................................................................89
Telnet Commands .......................................................................................................................93
AMX Device Discovery commands .........................................................................................93
PJLink™ supported commands ................................................................................................94
Trademarks ..................................................................................................................................96
Ceiling Installation ......................................................................................................................97
Optoma Global Ofces ...............................................................................................................98
Regulation & Safety notices .....................................................................................................100
Operation conditions ................................................................................................................101
English
3
Safety Information
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of import operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THE PROJECTOR TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Read these instructions –before using this projector.
2. Keep these instructions –for future reference.
3. Follow all instructions.
4. Install in accordance with the manufacturer’s instructions :
A. Do not block any ventilation openings. To ensure reliable
operation of the projector and to protect it from overheating,
put the projector in a position and location that will not
interfere with its proper ventilation. For example, do not
place the projector on a bed, sofa, carpet, or similar surface
that may block the ventilation openings. Do not put it in an
enclosure, such as a bookcase or a cabinet that may keep air
from owing through its ventilation openings.
B. Do not use this projector near water or moisture. To reduce
the risk of re or electric shock, do not expose the projector to
rain or moisture.
C. Do not install near any heat sources, such as radiators, heaters,
stoves or other apparatus (including ampliers) that produce heat.
5. Clean only with a dry cloth.
6. Only use attachments/accessories specied by the manufacturer.
7. Refer all servicing to qualied service personnel. Servicing is required
when the projector has been damaged in any way, such as:
r Power supply cord or plug is damaged.
r Liquids have spilled or objects have fallen into the apparatus.
r The projector has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Usage Notice
English
4
Do not attempt to service this projector yourself. Opening or
removing covers may expose you to dangerous voltages or
other hazards. Please call Optoma to be referred to an
authorized service center near you.
8. Do not let objects or liquids enter the projector as they may touch
dangerous voltage points or short-out parts that could result in a
re or electric shock.
9. See projector enclosure for safety related markings.
10. The projector should not be adjusted or repaired by anyone
except properly qualied service personnel.
Usage Notice
English
5
Usage Notice
Precautions
Please follow all warnings, precautions and
maintenance as recommended in this user’s
guide.
Warning - Do not look into the projector’s lens when the lamp is
on. The bright light may damage your eyes.
Warning - To reduce the risk of re or electric shock, do not
expose this projector to rain or moisture.
Warning - Please do not open or disassemble the projector as this
may cause electric shock.
Warning - When replacing the lamp, please allow unit to cool down,
and follow all replacement instructions. See page 81.
Warning - This projector will detect the life of the lamp itself. Please
be sure to change the lamp when it shows warning
messages.
Warning - Use the “Lamp Reset” function from the on-screen display
“Options|Lamp Setting” menu after replacing the lamp
module (see page 63).
Warning - When switching the projector off, please ensure the
cooling cycle has been completed before disconnecting
the power. Allow 90 seconds for the projector to cool
down.
Warning - Do not use the lens cap when projector is in operation.
Warning - When the lamp is approaching the end of its life, the
message “Lamp is approaching the end of its useful
life” displays on the screen. Please contact your local
reseller or service center to change the lamp as soon
as possible.
When the
lamp reaches
the end of its
life, the
projector will
not turn back
on until the
lamp
module has
been replaced.
To replace the
lamp, follow
the procedures
listed under
“Replacing the
Lamp” on page
81.
v
English
6
Do:
v Turn off the product before cleaning.
v Use a soft cloth moistened with a mild detergent to clean the
display housing.
v Disconnect the power plug from the AC outlet if the product
is not being used for a long period of time.
Do not:
v Block the ventilation slots and openings on the unit.
v Use abrasive cleaners, waxes or solvents to clean the unit.
v Use under the following conditions:
- In extremely hot, cold or humid environments. Ensure that
the ambient room temperature is within 5-40 °C and relative
humidity is 10-85% (max.), non-condensing.
- In areas susceptible to excessive dust and dirt.
- Near any appliance that generates a strong magnetic eld.
- In direct sunlight.
Usage Notice
English
7
Usage Notice
Eye Safety Warnings
Avoid staring directly into the projector’s beam of light at all times.
Minimize standing facing into the beam. Keep your back to the
beam as much as possible.
Using a stick or laser pointer is recommended to avoid the need
for the presenter to enter the beam.
Ensure that projectors are located out of the line of sight from
the screen to the audience; this ensures that, when presenters
look at the audience, they do not also have to stare at the
projector lamp. The best way to achieve this is by ceiling-
mounting the projector rather than placing it on oor or table
top.
When projector is used in a classroom, adequately supervise
students when they are asked to point out something on the
screen.
In order to minimize the lamp power needed, use room blinds
to reduce ambient light levels.
English
8
Introduction
Product Features
This product is a single chip 0.7” XGA, 0.67 WUXGA and 0.65”
WXGA series DLP
®
projector. Outstanding features include:
u Texas Instruments Single chip DLP
®
Technology
u Computer Compatibility:
Apple Macintosh, iMac, and VESA Standards:
UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA
u Video Compatibility:
NTSC, NTSC4.43
PAL/PAL-M/PAL-N/SECAM
SDTV and EDTV compatible
HDTV compatible (720p, 1080i, 1080p)
u Auto source detection with user denable settings
u
Fully featured IR remote control with wired remote
control
u User friendly multilingual On Screen Menu
u Advanced digital keystone correction and high
quality full screen image re-scaling
u User friendly control panel
u Macintosh and PC compatible
u HDMI compatible
u Closed Captioning equipped
u DisplayPort compatible
u Full 3D Support
u Eco AV Mute
u Wireless dongle support (via VGA port)
u USB Charger
English
9
Package Overview
This projector comes with all the items shown below. Check to
make sure your unit is complete. Contact your dealer
immediately if anything is missing.
Projector with lens cap
IR Remote Control
(with 2 x AAA Batteries)
Option Lens
(Standard lens/
Long throw lens/
Short throw lens)
Power Cord 1.8m VGA Cable 1.8m
USB Cable
(A to B) 1.8m
(optional)
Documentation:
þ
User’s Manual
þ
Warranty Card
þ
Quick Start Card
þ
WEEE Card
Introduction
v Due to the
difference in
applications for
each country,
some regions
may have
different
accessories.
For European
warrant
information
please
visit www.
optomaeurope.
com
English
10
Product Overview
Main Unit
2
1
7 69 8
11 10
5
4
3
12 13
19 18 17 16
14
15
1.
Front IR Receiver
10. Focus
2.
Top Cover 11.
Lens CAP
3.
Lens Release Button
12. Power Button
4.
Vertical and Horizontal Lens 13. LED Indicators
Shift Adjustment Controls 14. Input/Output Connections
5.
Control Panel 15. Back IR Receiver
6.
Lamp Cover 16. Main Power Switch
7.
Tilt-Adjustment foot 17. Power Socket
8.
Zoom 18. Security Bar
9.
Lens 19. Kensington™ Lock
Introduction
English
11
Introduction
Control Panel
2 31 4
6 5
1. Source / ◄
2. Keystone + / ▲
3. Re-Sync / ►
4. Menu
5. Enter
6. Keystone - / ▼
English
12
Rear View
2021
1
2
3
5
6
7
8
4
19 17
9
10
11
13
12
14
24
23
25
26
27
28
29
22
15
16
18
Introduction
1. Temp LED 16. 12V OUT Connector
2. Lamp LED 17. WIRED REMOTE (3.5mm jack)
3. HDMI Connector 18.
AUDIO IN L/R RCA (YPbPr)
Connectors
4. VGA 2/ YPbPr Connector 19.
AUDIO IN L/R RCA (Video/
S-Video) Connectors
5. DVI-D Connector 20. VIDEO Connector
6. 3D SYNC OUT 21. S-VIDEO Connector
7. DisplayPort 22. YPbPr Connectors
8. RJ-45 Connector 23. BNC Connectors
9. USB Power 24. Power Socket
10. VGA OUT 25. Main Power Switch
11. AUDIO OUT 3.5mm Jack 26. AUDIO IN (VGA1) Connector
12. AUDIO 2 IN (VGA2) Connector 27. VGA 1/ SCART/ YPbPr Connector
13. Back IR Receiver 28. Power Button
14. SERVICE 29. Power LED
15. RS-232 Connector
v AUDIO2-IN:
Share with DVI
& BNC audio
input.
English
13
Remote Control
1
2
3
7
8
11
14
24
23
161718
26
27
28
9
12
13
15
21
22
19
20
6
25
5
10
4
1. Power On
2. Audio
3. Function 2 (Assignable)
4. Enter
5. Four Directional Select Keys
6. Display mode
7. AV Mute
8. V Keystone +/-
9. Information Panel
10. S-Video/2 (Number Button
for password input)
11. Re-Sync
12. HDMI/3
13. DVI/6
14. 3D/0
15. DisplayPort/9
16. Video/5
17. YPbPr/8
18. BNC/7
19. VGA-2/4
20. VGA-1/1
21. Remote code 01~99
22. Remote code All
23. 12V Trigger On/Off
24. Format (Aspect Ratio)
25. Menu
26. Function 1 (Assignable)
27. Test Pattern
28. Power Off
Introduction
v Due to the
difference in
applications for
each country,
some regions
may have
different
accessories.
English
14
v Due to the
difference in
applications
for each
country, some
regions may
have different
accessories.
v AUDIO2-IN:
Share with DVI
& BNC audio
input.
Connecting the Projector
Connect to Computer / Notebook
3
1
9
2
11
10
5
12
4
3D Adapter
6
7
8
1. Power Cord
2. VGA Cable
3. Audio-in Cable *
4. HDMI Cable *
5. DVI-D Cable *
6. 3D Sync Cable *
7. DisplayPort Cable *
8. USB Power Charger *
9. VGA-out Cable (Available for VGA1 VGA signal loop through)
10. Audio-out (Optional RCA to 3.5mm jack cable)
11. RS-232 Cable *
12. BNC Cable *
*(Optional accessory)
Installation
English
15
Connect to Video Sources
4
DVD Player, Set-top Box,
HDTV receiver
DVD Player, Set-top Box,
HDTV receiver
1
2 3
7
7
9
6
5
4
Video Output
10
8
2
1. Power Cord
2. Component Cable *
3. HDMI Cable *
4. BNC Cable *
5. Audio-in Cable *
6. Video Cable *
7. S-Video Cable *
8.
VGA Cable
9.
SCART to RGB & S-Video Adapter *
10.
RGB to Component Adapter *
*(Optional accessory)
v Due to the
difference in
applications
for each
country, some
regions may
have different
accessories.
v AUDIO2-IN:
Share with DVI
& BNC audio
input.
Installation
English
16
Caution
• Do not shake or place excessive pressure on the projector or the
lens components as the projector and lens components contain
precision parts.
• Before removing or installing the lens, be sure to turn off the
projector, wait until the cooling fans stop, and turn off the main
power switch.
• Do not touch the lens surface when removing or installing the lens.
• Keep ngerprints, dust or oil off the lens surface. Do not scratch
the lens surface.
• Work on a level surface with a soft cloth under it to avoid scratching.
• If you remove and store the lens, attach the lens cap to the
projector to keep off dust and dirt.
Removing the Existing Lens From the Projector
1. Push down and
release the top cover
to open.
2. Push the LENSE
RELEASE button to
the unlock position.
3. Grasp the lens.
4. Rotate the lens
counterclockwise.
The existing lens will
be disengaged.
Installing or Removing the Optional Lens
v Removal of
the plastic
body cap
before
inserting a
lens for the
rst time.
Installation
English
17
5. Pull out the existing
lens slowly.
Installing the New Lens
Remove both end caps from the lens.
1. Align the notches and
correctly position the
electrical contact pad as
shown in the picture.
Electrical
contact
pins
2. Rotate the lens
clockwise until you feel
it click into place.
v Electrical
contact pins
should be in
the direction as
shown in the
picture.
Installation
English
18
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cover.
2. Connect the power cord to the projector.
3. Turn On the connected devices.
4. Ensure the Power LED turns red and then press the power
button to turn On the projector.
The Power LED will now ash blue.
The startup screen will display in approximately 30 seconds. The
rst time you use the projector, you can select your preferred
language and Power Mode setup after the startup screen display.
If the connected device is a PC, ensure the display is set to output
to the projector via the connected output. (Check the user manual
of the PC to determine the appropriate Fn key combination to
change display output.)
v Turn on the
projector rst
and then
select the
signal sources.
Installation
English
19
See Security Setting on page 46 if security lock is enabled.
5. If more than one input device is connected, press the “Source”
button sequentially to switch between devices.
For direct source selection, see page 29.
Installation
English
20
Powering Off the Projector
1. Press POWER to turn off the projector lamp, a message displays on the
projector’s screen.
2. Press POWER again to conrm, otherwise the message disappears
after 15 seconds.
3.
The cooling fans continue to operate for about 180 seconds for
cooling cycle
and the Power Led will turn blue. When the light is
solid red, the projector has entered standby mode.
(If you wish to turn the projector back on, you must wait until the
projector has completed the cooling cycle and has entered standby
mode. Once in standby mode, simply press POWER to restart the
projector.)
4. Turn off the main power switch. Disconnect the power cord from
the electrical outlet and the projector.
5. Do not turn on the projector immediately following a power off
procedure.
Warning Indicator
v When the LAMP LED indicator lights red, the projector will
automatically shut itself down. Please contact your local reseller
or service center. See pages 79-80.
v When the TEMP LED is on a steady (not ashing) red, the
projector will automatically shut itself down. Under normal
conditions, the projector can be switched on again after it has
cooled down. If the problem persists, you should contact your
local dealer or our service center. See pages 79-80.
v When the TEMP LED ashes red, it indicates the fan has failed.
Please contact your local dealer or our service center. See pages
79-80.
Installation
English
21
Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with elevator foot for adjusting the image height.
To raise the image:
Use screw in foot
u
to rise the image to the desired height angle and
ne-tune the display angle.
To lower the image:
Use screw in foot
u
to lower the image to the desired height angle
and to ne-tune the display angle.
1 1
Adjusting Projected Image Position
Using Lens Shift
v Suggest to
loosen the
screw before
lens shift
adjustment
and tighten up
after nished
adjustment.
Horizontal Lens
Shift Lever
Vertical Lens
Shift Lever
Lens Release
Screw for ensure
the lens position
Installation
English
23
Adjusting the horizontal image position
With the lens in the center position the
horizontal image position can be adjusted
to the left or right by up to a maximum of
5% of the image width. Please consult the
Lens Shift Range diagram below for
further clarication.
Left Side
(W/2) x 10% (W/2) x 10%
Right Side
Screen Width
(W)
Lens Shift Range Diagram
W
H
H5%
H50%
H15%
W5% W5%
When W and H at 0% offset position
The max. H up shift=Hx55%
The max. H down shift=Hx15%
The max. W shift=Wx5%
When max. W shift is Wx5%
Max. H shift=Hx50%
When max. H shift is Hx55%
Max. W shift=Hx0%
WXGA / WUXGA
When W and H at 0% offset position
The max. H up shift=Hx50%
The max. H down shift=Hx10%
The max. W shift=Wx5%
When max. W shift is Wx5%
Max. H shift=Hx45%
When max. H shift is Hx50%
Max. W shift=Hx0%
W
H
H5%
H45%
H10%
W5% W5%
XGA
Installation
English
24
Adjusting the Zoom / Focus
You may turn the zoom ring to zoom in or out. To focus the image,
rotate the focus ring until the image is clear. The projector will focus
at distances. See pages 25-27.
Use the keystone buttons to correct image distortion. They can be
found on the remote control and on the projector’s control panel.
Installation
English
25
Adjusting Projection Image Size (XGA)
Height
Diagonal
Width
HdHd
4.9' (1.50m)
8.9' (2.72m)
14.4' (4.40m)
20.2'(6.16m)
26.2'(8.00m)
32.0' (9.76m)
6.6' (2.00m)
18.4' (5.60m)
30.2' (9.20m)
42.0'(12.80m)
53.8' (16.40m)
65.6'(20.00m)
1.6' (0.50m)
3.3' (1.00m)
4.9' (1.50m)
6.6' (2.00m)
8.2' (2.50m)
9.8' (3.00m)
STD lens: offset=50%
Screen
(Diagonal)
Max.
46.1’’
(117.2cm)
83.7’’
(212.5cm)
135.3’’
(343.8cm)
189.5’’
(481.3cm)
246.1’’
(625.0cm)
300.2’’
(762.5cm)
Min.
36.9’’
(93.8cm)
66.9’’
(170.0cm)
108.3’’
(275.0cm)
151.6’’
(385.0cm)
196.9’’
(500.0cm)
240.2’’
(610.0cm)
Screen size
Max
(WxH).
36.9’’x27.7’’
93.8x70.3cm
66.9’’x50.2’’
170.0 x127.5cm
108.3’’x81.2’’
275.0 x206.3cm
151.6’’ x113.7’’
385.0 x288.8cm
196.9’’ x147.6’’
500.0 x375.0cm
240.2’’ x180.1’’
610.0 x457.5cm
Min.
(WxH)
29.5’’ x22.1’’
75.0 x56.3cm
53.5’’x40.2’’
136.0 x102.0cm
86.6’’x65.0’’
220.0 x165.0cm
121.3’’x90.9’’
308.0 x231.0cm
157.5’’x118.1’’
400.0 x300.0cm
192.1’’ x144.1’’
488.0 x366.0cm
Distance
4.9’ (1.50m) 8.9’ (2.72m) 14.4’ (4.40m) 20.2’ (6.16m) 26.2’ (8.00m) 32.0’ (9.76m)
Long lens: offset=50%
Screen
(Diagonal)
Max.
49.2’’
(125.0cm)
137.8’’
(350.0cm)
226.4’’
(575.0cm)
315.0’’
(800.0cm)
403.5’’
(1025.0cm)
492.1’’
(1250.0cm)
Min.
32.8’’
(83.3cm)
91.9’’
(233.3cm)
150.9’’
(383.3cm)
210.0’’
(533.3cm)
269.0’’
(683.3cm)
328.1’’
(833.3cm)
Screen size
Max
(WxH).
39.4’’x29.5’’
100.0x75.0cm
110.2’’x82.7’’
280.0x210.0cm
181.1’’x135.8’’
460.0x345.0cm
252.0’’x189.0’’
640.0x480.0cm
322.8’’x242.1’’
820.0x615.0cm
393.7’’x295.3’’
1000.0x750.0cm
Min.
(WxH)
26.2’’x19.7’’
66.7x50.0cm
73.5’’x55.1’’
186.7x140.0cm
120.7’’x90.6’’
306.7x230.0cm
168.0’’x126.0’’
426.7x320.0cm
215.2’’x161.4’’
546.7x410.0cm
262.5’’x196.9’’
666.7x500.0cm
Distance
6.6’(2.00m) 18.4’(5.60m) 30.2’(9.20m) 42.0’(12.80m) 53.8’(16.40m) 65.6’(20.00m)
Short lens: offset=50%
Screen (Diagonal)
30.8’’
(78.1cm)
61.5’’
(156.3cm)
92.3’’
(234.4cm)
123.0’’
(312.5cm)
153.8’’
(390.6cm)
184.5’’
(468.8cm)
Screen size
24.6’’x18.5’’
62.5x46.9cm
49.2’’x36.9’’
125.0x93.8cm
73.8’’x55.4’’
187.5x140.6cm
98.4’’x73.8’’
250.0x187.5cm
123.0’’x92.3’’
312.5x234.4cm
147.6’’x110.7’’
375.0x281.3cm
Distance
1.6’ (0.50m) 3.3’ (1.00m) 4.9’ (1.50m) 6.6’ (2.00m) 8.2’ (2.50m) 9.8’ (3.00m)
Installation
English
27
Adjusting Projection Image Size (WUXGA)
Height
Diagonal
Width
HdHd
4.9' (1.50m)
6.6' (2.00m)
18.4' (5.60m)
30.2' (9.20m)
42.0' (12.80m)
53.8' (16.40m)
65.6'(20.00m)
1.6' (0.50m)
3.3' (1.00m)
4.9' (1.50m)
6.6' (2.00m)
8.2' (2.50m)
9.8' (3.00m)
8.9' (2.72m)
14.4' (4.40m)
20.2' (6.16m)
26.2 (8.00m)
32.6' (9.95m)
STD lens: offset=55%
Screen
(Diagonal)
Max.
45.2’’
(114.9cm)
82.0’’
(208.3cm)
132.6’’
(336.9cm)
185.7’’
(471.7cm)
241.2’’
(612.6cm)
300.0’’
(761.9cm)
Min.
36.1’’
(91.7cm)
65.4’’
(166.2cm)
105.8’’
(268.8cm)
148.2’’
(376.4m)
192.4’’
(488.8cm)
239.4’’
(608.0cm)
Screen size
(WxHl)
Max
38.3’’x24.0’’
97.4x60.9cm
69.5’’x43.5’’
176.6x110.4cm
112.5’’x70.3’’
285.7x178.6cm
157.5’’x98.4’’
400.0x250.0cm
204.5’’x127.8’’
519.5x324.7cm
254.4’’x159.0’’
646.1x403.8cm
Min.
30.6’’x19.1’’
77.7x48.6cm
55.5’’x34.7’’
140.9x88.1cm
89.8’’x56.1’’
228.0x142.5cm
125.7’’x78.5’’
319.2x199.5cm
163.2’’x102.0’’
414.5x259.1cm
203.0’’x126.9’’
515.5x322.2cm
Hd
Max.
1.2’’ (3.0cm) 2.2’’ (5.5cm) 3.5’’ (8.9cm) 4.9’’ (12.5cm) 6.4’’ (16.2cm) 7.9’’ (20.2cm)
Min.
1.0’’ (2.4cm) 1.7’’ (4.4cm) 2.8’’ (7.1cm) 3.9’’ (10.0cm) 5.1’’ (13.0cm) 6.3’’ (16.1cm)
Distance
4.9’ (1.50m) 8.9’ (2.72m) 14.4’ (4.40m) 20.2’ (6.16m) 26.2’ (8.00m) 32.6’ (9.95m)
Long lens: offset=55%
Screen
(Diagonal)
Max.
48.1’’
(122.2cm)
134.7’’
(342.2cm)
221.3’’
(562.1cm)
307.9’’
(782.1cm)
394.5’’
(1002.1cm)
481.1’’
(1222.0cm)
Min.
32.0’’
(81.3cm)
89.7’’
(227.7cm)
147.3’’
(374.1cm)
204.9’’
(520.5cm)
262.6’’
(666.9cm)
320.2’’
(813.3cm)
Screen size
(WxHl)
Max
40.8’’x25.5’’
103.6x64.8cm
114.2’’x71.4’’
290.2x181.3cm
187.7’’x117.3’’
476.7x297.9cm
261.1’’x163.2’’
663.2x414.5cm
334.5’’x209.1’’
849.7x531.1cm
408.0’’x255.0’’
1036.0x647.7cm
Min.
27.2’’x17.0’’
69.0x43.1cm
76.0’’x47.5’’
193.1x120.7cm
124.9’’x78.1’’
317.2x198.3cm
173.8’’x108.6’’
441.4x275.9cm
222.6’’x139.2’’
565.5x353.4cm
271.5’’x169.7’’
689.7x431.0cm
Hd
Max.
1.3’’ (3.2cm) 3.6’’ (9.1cm) 5.9’’ (14.9cm) 8.2’’ (20.7cm) 10.5’’ (26.6cm) 12.7’’ (32.4cm)
Min.
0.8’’ (2.2cm) 2.4’’ (6.0cm) 3.9’’ (9.9cm) 5.4’’ (13.8cm) 7.0’’ (17.7cm) 8.5’’ (21.6cm)
Distance
6.6’ (2.00m) 18.4’ (5.60m) 30.2’ (9.20m) 42.0’ (12.80m) 53.8’ (16.40m) 65.6’ (20.00m)
Short lens: offset=55%
Screen (Diagonal)
30.1’’ (76.6cm) 60.3’’ (153.1cm) 90.4’’ (229.7cm) 120.6’’ (306.3cm) 150.7’’ (382.9cm) 180.9’’ (459.4cm)
Screen size (WxHl)
25.6’’x16.0’’
64.9x40.6cm
51.1’’x32.0’’
129.9x81.2cm
76.7’’x47.9’’
194.8x121.8cm
102.3’’x63.9’’
259.7x162.3cm
127.8’’x79.9’’
324.7x202.9cm
153.4’’x95.9’’
389.6x243.5cm
Hd
0.8’’ (2.0cm) 1.6’’ (4.1cm) 2.4’’ (6.1cm) 3.2’’ (8.1cm) 4.0’’ (10.1cm) 4.8’’ (12.2cm)
Distance
1.6’ (0.50m) 3.3’ (1.00m) 4.9’ (1.50m) 6.6’ (2.00m) 8.2’ (2.50m) 9.8’ (3.00m)
Installation
English
28
Control Panel
Using the Control Panel
▲/Keystone+
(Up arrow)
•Adjust the image Keystone positively.
Navigates and changes settings in the OSD.
◄/Source
(Left arrow)
Press Source to select an input signal.
Navigates and changes settings in the OSD.
Enter Conrm your item selection.
►/
Re-Sync
(Right arrow)
•Automatically synchronizes the projector to
the input source.
Navigates and changes settings in the OSD.
Menu
Press Menu to launch the on-screen display
(OSD) menu. To exit OSD, Press Menu again.
User Controls
English
30
Using the Remote Control
Remote ID
Press until Power LED is ashing then
press 01~99 to set the particular remote
code.
Remote All Press to set remote code to all.
VGA1
Press VGA1 to choose source from
VGA- IN connector.
S-Video Press S-Video to choose S-Video source.
HDMI Press HDMI to choose HDMI source.
Re-sync
Automatically synchronizes the
projector to the input source.
VGA2
Press VGA2 to choose source from
VGA- IN connector.
Video
Press Video to choose Composite video
source.
DVI
Press DVI to choose source from DVI-D
connector.
BNC Press BNC to choose BNC source.
YPbPr Press YPbPr to choose YPbPr source.
DisplayPort
Press DisplayPort to choose
DisplayPort source.
3D Press 3D to turn on/off 3D menu.
v Due to the
difference in
applications
for each
country, some
regions may
have different
accessories.
User Controls
English
31
On-screen Display Menus
The Projector has multilingual On-screen Display menus that allow you to
make image adjustments and change a variety of settings. The projector will
automatically detect the source.
How to operate
1. To open the OSD menu, press Menu on the Remote Control or
Projector Keypad.
2. When OSD is displayed, use ◄► keys to select any item in the
main menu. While making a selection on a particular page, press
▼ or Enter to enter sub menu.
3. Use ▲▼ keys to select the desired item and adjust the settings by
◄► key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press Enter to conrm, and the screen will return to the main
menu.
6. To exit, press Menu again. The OSD menu back to last level
projector will automatically save the new settings.
Main Menu
Sub Menu
Setting
User Controls
English
32
Menu Tree
IMAGE
Display Mode
Sharpness
Brightness
Advanced
#Tint
#Color
IMAGE | Advanced
BrilliantColor
TM
Noise Reduction
Gamma
Color Temp.
Color Space
Color Space
RGB Gain/Bias
Color Matching (saved by signal)
Exit
*3D
SETUP | Security
Security Setting
Security Timer
Change Password
Exit
Auto/RGB/YUV
Warm/Standard/Cool/Cold
Film/Graphics/1.8/2.0/2.2/2.6/3D
Presentation/Bright/Movie/sRGB/Blackboard/DICOM SIM./3D
Auto/RGB(0-255)/RGB(16-235)/YUV
Red Gain/Green Gain/Blue Gain/Red Bias/Green Bias/Blue Bias/Reset/Exit
Automatic/Frequency/Phase/H. Position/V. Position/Exit
White Level/Black Level/IRE/Exit
Red/Green/Blue/Cyan/Magenta/Yellow/White/Reset/Exit
Format
Edge Mask
Digital Zoom Zoom/H Zoom/V Zoom/Exit
H Image Shift
V Image Shift
V Keystone
DISPLAY
4:3/16:9/LBX/Native/Auto (XGA)
4:3/16:10/LBX/Native/Auto (WXGA/WUXGA)
3D Mode DLP-Link/VESA 3D
3D->2D
3D Format
3D Sync Invert
Exit
3D/L/R
Auto/SBS/Top and Bottom/Frame Sequential
On/Off
Language
SETUP
Screen Type
(WXGA/WUXGA only)
Projection
Menu Location
Signal(RGB)
Security
Projector ID
Signal(Video)
Audio Settings
On/Off
Month/Day/Hour/Exit
Control Settings
SETUP | Audio Settings
Internal Speaker
Mute
Volume
Audio Input
Exit
On/Off
On/Off
0~10
Default /Audio 1/Audio 2/Audio 3/Audio 4
SETUP | Advanced
SETUP | Network
Logo
Logo Capture
Closed Captioning
Exit
Optoma/Neutral/User
Off/CC1/CC2
Contrast
Reset
Advanced
Crestron/Extron/PJ Link/AMX Device Discovery/Telnet/Exit
LAN Settings
Network Status/DHCP/IP Address/Subnet Mask/Gateway/DNS/Apply/MAC Address/Exit
16:9/16:10
Network
DISPLAY | 3D
*HDMI only
Bahasa Indonesia
v (#) “Color” and
“Tint” is only
supported in
for YUV video
sources..
v (*) “3D” is only
available when
a compatible
signal is
supplied..
User Controls
English
33
Function 1
Function 2
IR Function
Remote Code
Brightness/Contrast/Color/Color Temp./Gamma
Source Lock/Projection/Lamp Settings/Mute/Digital Zoom
Exit
On/Off
All / 1 ~ 99
OPTIONS
Source Lock
High Altitude
Information Hide
Keypad Lock
Display Mode Lock
Background Color
On/Off
On/Off
Lamp Setting
Reset Current/All
On/Off
On/Off
Input Source
HDMI/DVI-D/BNC/VGA 1/VGA 2/Component/S-Video/Video/Display Port/Exit
On/Off
On/Off
OPTIONS | Advanced
Direct Power On
Auto Power Off (min)
Sleep Timer (min)
On/Off
Signal Power On On/Off
Power Mode (Standby)
Exit
Active/ECO
OPTIONS | Lamp Setting
Lamp Hour
Lamp Reset
Power
Exit
Yes/No
370w/360w/350w/340w/330w/320w/310w/300w/290w/280w
On/Off
OPTIONS | Remote Setting
Test Pattern
Information
Blue/Black/Red/Green/White
12V Trigger
Remote Setting
Advanced
None/Grid(White)/Grid(Green)/Grid(Meganta)/White
Lamp Reminder
Brightness Mode
STB/Eco
User Controls
English
34
Image
Display Mode
There are many factory presets optimized for various types of images.
4
Presentation: Good color and brightness from PC input.
4
Bright: Maximum brightness from PC input.
4
Movie: For home theater.
4
sRGB: Standardised accurate color.
4
Blackboard: This mode should be selected to achieve optimum color
settings when projecting onto a blackboard (green).
4
DICOM SIM: This display mode simulates the grayscale/gamma
performance of equipment used for “Digital Imaging
and Com munications in Medicine” (DICOM).
Important: This mode should NEVER be used for medical diagnosis, it is
for education/training purposes only.
4
3D: User adjustable setting for 3D viewing.
Brightness
Adjust the brightness of the image.
4
Press ◄ to darken image.
4
Press ► to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and
darkest parts of the picture.
4
Press ◄ to decrease the contrast.
4
Press ► to increase the contrast.
User Controls
English
35
Image
Sharpness
Adjusts the sharpness of the image.
4
Press ◄ to decrease the sharpness.
4
Press ► to increase the sharpness.
Color
Adjusts a video image from black and white to full color saturation.
4
Press ◄ to decrease the amount of color in the image.
4
Press ► to increase the amount of color in the image.
Tint
Adjusts the color balance of red and green.
4
Press ◄ to increase the amount of green in the image.
4
Press ► to increase the amount of red in the image.
Advanced
Enter the Advanced menu. Select advanced display options such as Noise
Reduction, BrilliantColor
TM
, Gamma, Color Temp., Color Space, RGB
Gain/Bias, Color Matching, and Exit. See page 36 for more information.
User Controls
English
36
Image | Advanced
Noise Reduction
The motion Adaptive Noise Reduction reduces the amount of visible
noise in interlaced signals. The range is from “0” to “10”. (0=Off)
BrilliantColor
TM
This adjustable item utilizes a new color-processing algorithm and
system level enhancements to enable higher brightness while providing
true, more vibrant colors in picture. The range is from 0 to 10. If you
prefer a stronger enhanced image, adjust toward the maximum setting.
For a smoother, more natural image, adjust toward the minimum setting.
Gamma
Choose the Gamma type from Film, Graphics, 1.8, 2.0, 2.2, 2.6 or 3D.
Color Temp
Adjust the color temperature. Cold temperature, the screen looks colder;
with Warm temperature, the screen looks warmer.
Color Space
Select an appropriate color matrix type from AUTO, RGB, YUV.
4
For HDMI only: Select color matrix from Auto, RGB (0-255), RGB (16-
235), YUV.
RGB Gain/Bias
This setting is used to adjust the balance of red, green and blue in grays/
white. Enter the RGB Gain/Bias menu. Select the Red/Green/Blue Gain
for brightness adjustments and Bias for contrast adjustments for the whole
picture. See page 37 for more details
Color Matching
Enter the Color Matching menu. See page 38 for more details.
User Controls
English
37
Image | Advanced | RGB Gain/
Bias
This setting is used to adjust the balance of red, green and blue in
grays/white.
Gain
Set RGB Gain to adjust the Brightness of the follow in brighter shades:
4
Red—balance the gain value for red.
4
Green—balance the gain value for green.
4
Blue—balance the gain value for blue.
Bias
Set RGB Gain to adjust the Brightness of the follow in darker shades:
4
Red—balance the bias value for red.
4
Green—balance the bias value for green.
4
Blue—balance the bias value for blue.
User Controls
English
38
Image | Advanced | Color
Matching
Colors (Except White)
Press ▲▼ to select a color and press Enter to adjust the hue, saturation,
and gain settings.
Press ▲▼ to select Hue, Saturation, or Gain and press ◄► to adjust the
settings.
v Green, Blue,
Cyan,Yellow,
Magenta can be
separate adjust
by each color
HSG.
User Controls
English
39
Image | Advanced | Color
Matching
White
Press ▲▼ to select White and press Enter.
Press ▲▼ to select Red, Green, or Blue and press ◄► to adjust the
settings.
Reset
Reset all Color Setting values to the factory default.
v White can be
adjust Red,
Green, Blue
color by each.
User Controls
English
40
Display
Format
Use this function to choose your desired aspect ratio.
4
4:3: This format is for 4x3 input sources not enhanced for Wide screen TV.
4
16:9 (XGA) | 16:10 (WXGA/WUXGA): This format is for 16x9 input
sources, like HDTV and DVD enhanced for Wide screen TV.
4
LBX: This format is for non-16x9, letterbox source and for users who
use an external 16x9 lens to display 2.35:1 aspect ratio using full
resolution.
4
Native: Depends on the resolution of the input source – No scaling is
performed.
4
Auto: Automatically selects the appropriate format.
XGA
WXGA/WUXGA
User Controls
English
41
Display
Digital Zoom
4
Press ◄ to reduce the size of the image.
4
Press ► to magnify an image on the projected screen.
Edge Mask
Edge Mask function removes the noise in a video image. Edge Mask the
image to remove video encoding noise on the edge of video source.
H Image Shift
Shifts the projected image position horizontally.
4
Press to move the image left on the projected screen.
4
Press to move the image right on the projected screen.
V Image Shift
Shifts the projected image position vertically.
4
Press to move the image up on the projected screen.
4
Press to move the image down on the projected screen.
V Keystone
Press ◄ or ► to compensate for vertical images distortion when the
projector is positioned at an angle to the screen.
3D
Enter the 3D menu. Select 3D options such as 3D Mode, 3D->2D, 3D
Format, and 3D Sync Invert. See page 42 for more information.
User Controls
English
42
Display | 3D
3D Mode
4
DLP Link: Select DLP Link to use optimized settings for DLP Link 3D
Glasses.
4
VESA 3D: Select VESA 3D to use optimized settings for IR-based 3D
images.
3D2D
Press or to select projector display 3D content in 2D (Left) or 2D(Right)
without using 3D glasses to enjoy 3D content. This setting can also be used
for dual projector passive 3D installations.
3D Format
4
Auto: When a 3D identication signal is detected, the 3D format is
selected automatically. (For HDMI 1.4 3D sources only)
4
SBS: Display 3D signal in Side-by-Side format.
4
Top and Bottom: Display 3D signal in Top and Bottom format.
4
Frame Sequential: Display 3D signal in Frame Sequential format.
3D Sync. Invert
Press or to enable or disable the 3D Sync invert function to invert
images.
User Controls
English
43
Setup
Language
Enter the Language menu. Select the multilingual OSD menu.
See page 45 for more information.
Projection
Select projection method:
4
Front Desktop
The factory default setting.
4
Rear Desktop
When you select this function, the projector reverses the image so you
can project from behind a translucent screen.
4
Front Ceiling
When you select this function, the projector turns the image upside
down for ceiling-mounted projection.
4
Rear Ceiling
When you select this function, the projector reverses and turns the
image upside down at same time. You can project from behind a
translucent screen with ceiling mounted projection.
Screen Type (WXGA/WUXGA only)
Press ◄► to set the aspect ratio to 16:9 or 16:10. This function only
supports WXGA/WUXGA.
Menu Location
Choose the menu location on the display screen.
User Controls
English
44
Setup
Security
Enter the Security menu. Access the projector’s security features.
See page 46 for more information.
Signal (RGB)
Enter the Signal (RGB) menu. Set projector signal properties. The function
is available when input source is support VGA 1/VGA 2/BNC.
See page 49 for more information.
Signal(Video)
Enter the Signal (Video) menu. Set projector signal properties. The
function is available when input source is support Video signal.
See page 50 for more information.
Projector ID
Select a two digit projector ID from All through 99.
Audio Settings
Enter the Audio menu. Set audio level properties. See page 51 for more
information.
Advanced
Enter the Advanced menu. Select the screen display during startup.
See page 52 for more information.
Network
Allows access to controls for web, PJ-Link, and IP commands. See page
53 for more information.
User Controls
English
45
Setup | Language
Language
Choose the multilingual OSD menu. Press ENTER ( ) into the sub
menu and then use the Left () or Right () key to select your preferred
language.
User Controls
English
46
Setup | Security
Security Setting
Enable or disable the security password.
4
Enabled—the current password is required to power on the projector
and access the Security menu.
4
Disabled—no password is required for any function.
When security is enabled, the following screen displays at startup and
before access to the Security menu is allowed:
v The default
password: 1, 2,
3, 4, 5.
User Controls
English
47
Setup | Security
Security Timer
Enter the Security Timer sub menu.
Enter the Months, Days, and hours that the projector can be used without
entering the password. Exiting to the Setup menu activates the Security
Timer.
Once activated, the projector requires a password on the specied dates
and times to allow power on and access to the security menu.
If the projector is in use and the Security Timer is active, the following
screen displays 60 seconds before the password is required.
v No password
is required to
access Setup
| Security
unless the
Security Timer
or Security
Setting are
enabled.
User Controls
English
48
Setup | Security
Change Password
Use this submenu to change the security password for the projector.
1. Select Change Password from the Security submenu. The Conrm
Change Password dialog box displays.
2. Select Yes.
3. Enter the default password <1> <2> <3> <4> <5>.
A second password screen displays.
4. Enter the new password twice for verication.
v If the incorrect
password is
entered three
times, the
device auto
shutdowns after
10 seconds.
v If the new
passwords
do not match,
the password
screen
redisplays.
User Controls
English
49
Setup | Signal (RGB)
Automatic
Set Automatic to On or Off to lock or unlock the Phase and Frequency
features.
4
Off—disable auto lock.
4
On—enable auto lock.
Frequency
Change the display data frequency to match the frequency of your
computer’s graphics card. If you experience a vertical ickering bar, use
this function to make an adjustment.
Phase
Phase synchronizes the signal timing of the display with the graphics
card. If you experience an unstable or ickering image, use this function
to correct it.
H. Position
4
Press ◄ to move the image left.
4
Press ► to move the image right.
V. Position
4
Press ◄ to move the image down.
4
Press ► to move the image up.
User Controls
English
50
Setup | Signal (Video)
White Level
Allow user to adjust Black Level when input source is Video or S-Video
signals. Press ◄► to adjust the White Level.
Black Level
Allow user to adjust Black Level when input source is Video or S-Video
signals. Press ◄► to adjust the Black Level.
IRE
Press ◄► to adjust measurement of video signals.
User Controls
English
51
Setup | Audio Settings
Internal Speaker
4
Off—turn off the internal speaker.
4
On–turn on the internal speaker.
Mute
Toggle the audio on or off.
4
Off—the speaker volume and audio out are turned on.
4
On–the speaker volume and audio out are turned off.
Volume
Press to decrease the volume.
Press to increase the volume.
Audio Input
Press ◄► to select audio source input.
User Controls
English
52
Setup | Advanced
Logo
Select the screen to display during startup.
4
Optoma—the supplied default startup screen.
4
Neutral— is Background Color.
4
User—customized screen capture using the Logo Capture function.
Logo Capture
Capture a displayed screen to use as the startup screen.
1. Display the desired screen on the projector.
2. Select Logo Capture from the Advanced menu.
A conrmation screen displays.
3. Select OK. Screen capture in progress will display.
When nished, Screen capture Succeeded will display.
The captured screen is saved as User in the logo menu.
Closed Captioning
Select the screen to display closed captioning
4
Off–the supplied default setting.
4
CC1/CC2–closed captioning type select.
v Only one
startup screen
can be saved
at once.
Subsequent
captures
overwrite
previous les
limited in
1920 x
1200 (Refer
Appendices
Timing Table)
User Controls
English
53
Setup | Network
LAN Settings
Enter the LAN Settings menu. See page 54 for more information.
Control Settings
Enter the Control Settings menu. See page 55 for more information.
User Controls
English
54
Setup | LAN Settings
If the connection is successful, the OSD display will show the following
dialogue box.
4
Network State—to display network information.
4
DHCP:
On: Assign an IP address to the projector from the DHCP server
automatically.
Off: Assign an IP address manually.
4
IP Address—Select an IP address
4
Subnet Mask—Select subnet mask number.
4
Gateway—Select the default gateway of the network connected to the
projector.
4
DNS—Select DNS number.
4
Apply—Press Enter to apply the selection.
4
MAC Address—Read only.
v Network
sub-menu
can only be
accessed if a
network cable
is connected.
User Controls
English
55
Setup | Control Settings
Crestron
Press ◄► to check to enable/disable Crestron.
Extron
Press ◄► to check to enable/disable Extron.
PJ Link
Press ◄► to check to enable/disable PJ Link.
AMX Device Discovery
Press ◄► to check to enable/disable AMX Device Discovery.
Telent
Press ◄► to check to enable/disable Telnet.
User Controls
English
56
Options
Input Source
Enter the Input Source submenu. Select the sources to scan for at startup.
See page 59 for more information.
Source Lock
Lock the current source as the only available source, even if the cable is
unplugged.
4
On—only the current source is recognized as an input source.
4
Off—all sources selected in Options | Input Source are recognized as
an input source.
High Altitude
Adjust the fan speed to reect the environment.
4
On—increases fan speed for high temperature, humidity, or altitude.
4
Off—regular fan speed for normal conditions.
Information Hide
Suppress informational messages on the projected screen.
4
On—no status messages appear on screen during operation.
4
Off— status messages appear as normal on screen during operation.
User Controls
English
57
Options
Keypad Lock
Lock the buttons on the projector top panel.
4
On—a warning message displays to conrm keypad lock.
4
Off—projector keypad functions as normal.
Display Mode Lock
Press ◄► to select display mode function whether lock or not. When
Display Mode Lock set to On, the Display Mode function can’t be adjusted
by user.
Test Pattern
Display a test pattern. There are Grid (White, Green, Magenta), White and
None.
Background Color
Select the desired background color for the projected image when no
source is detected.
Remote Settings
Enter the Remote settings. See page 60 for more information.
12V Trigger
Press ◄► to select 12V Trigger whether output or not.
User Controls
English
58
Options
Advanced
Enter the Advanced menu. See pages 61 for more details.
Lamp Setting
Enter the Lamp Setting menu. See pages 63-64 for more details.
Information
Show the projector information.
Reset
Reset all Options to default factory settings.
v When Power
mode (Standby)
is set to Eco,
the VGA &
Audio pass-
through, RS232
and RJ45 will
be deactivated
when the
projector is in
standby.
User Controls
English
59
Options | Input Source
Input Source
Use this option to enable / disable input sources. Press ▲ or ▼ to select a
source, then press ◄ or to enable / disable it. Press (Enter) to nalize
the selection. The projector will not search inputs that are de-selected.
v If all sources
are deselected,
the projector
cannot display
any images.
Always leave at
least one source
selected.
User Controls
English
60
Options | Remote Settings
Function 1
Set F1 key as a hotkey for Brightness, Contrast, Color, Color Temp. or
Gamma function.
Function 2
Set F2 key as a hotkey for Source Lock, Projection, Lamp Settings, Mute,
Digital Zoom or Volume function.
IR Function
Enable or Disable projector’s IR function.
Remote Code
Press ◄► to set Remote custom code and press (Enter) to change to
the setting.
User Controls
English
61
Options | Advanced
Direct Power On
Enable or disable Direct Power On.
4
On—the projector powers on automatically when AC power is supplied.
4
Off— the projector must be powered on as normal.
Signal Power On
Enable or disable Signal Power On.
4
On—the projector powers on automatically when an active signal is detected.
4
Off— disable the power on trigger by active signal is detected.
1. Only available on Standby Mode is Active.
2. If projector is turned off with keeping input the signal source (the last
image source showing on screen), it will not re-start unless:
a. Terminate the last image source and input any signal source again.
b. Unplug and re-plug the projector power again.
3. Signal power on will ignore “source lock” setting.
Auto Power Off (min)
Set the Auto Power Off interval. The projector powers off the lamp after
30 minutes of no signal by default. The following warning is displayed 60
seconds before power off.
User Controls
English
62
Options | Advanced
Sleep Timer (min)
Set the Sleep Timer interval. The projector powers off after the specied
time period of inactivity (regardless of signal). The following warning is
displayed 60 seconds before power off.
Power Mode (Standby)
4
Eco.: Choose “Eco.” to save power dissipation further < 0.5W.
4
Active: Choose “Active” to return to normal standby and the VGA
out port will be enabled.
User Controls
English
63
Options | Lamp Setting
Lamp Hour
Displays the number of hours the lamp has been active. This item is for
display only.
Lamp Reset
After replacing the lamp, reset the lamp counter to accurately reect the
new lamp’s life span.
1. Select Lamp Reset.
A conrmation screen displays.
2. Select Yes to reset the lamp counter to zero.
Lamp Reminder
Enable or disable the lamp life span reminder.
4
On—a warning message displays when remaining lamp life is less than
30 hours.
4
Off—no warning message displays.
User Controls
English
64
Options | Lamp Setting
Brightness Mode
Select the lamp brightness mode.
4
Bright—the default setting.
4
Eco—lower brightness setting to conserve lamp life.
Power
Press ◄► to select the lamp mode for 370W brightness or 280W
brightness to save lamp life. The function is only available when
Brightness Mode is Power.
User Controls
English
65
LAN_RJ45
For simplicity and ease of operation, the Optoma projector provides
diverse networking and remote management features.
The LAN/RJ45 function of the projector through a network, such as
remotely manage: Power On/Off, Brightness and Contrast settings. Also,
projector status information, such as: Video-Source, Sound-Mute, etc.
Wired LAN Terminal functionalites
The projector can be controlled by a PC (Laptop) or other external device
via LAN/RJ45 port and compatible with Crestron / Extron / AMX
(Device Discovery) / PJLink.
4
Crestron is a registered trademark of Crestron Electronics, Inc. of the United
States.
4
Extron is a registered trademark of Extron Electronics, Inc. of the United
States.
4
AMX is a registered trademark of AMX LLC of the United States.
4
PJLink applied for trademark and logo registration in Japan, the United
States of America, and other countries by JBMIA.
Supported External Devices
This projector is supported by the specied commands of the Crestron
Electronics controller and related software (ex, RoomView
®
).
http://www.crestron.com/
This projector is compliant to support Extron device(s) for reference.
http://www.extron.com/
This projector is supported by AMX ( Device Discovery ).
http://www.amx.com/
This projector supports all commands of PJLink Class1 (Version 1.00).
http://pjlink.jbmia.or.jp/english/
For more detail of information about the diverse types of external devices
which can be connected to the LAN/RJ45 port and remote/control the
projector, as well as the related control commands supporting for each
external device, kindly please get contact with the Support-Service
directly.
v Projector
connects to
LAN, please
use Ethernet
Normal Cable.
v Peer-to-peer
(PC connects
to Projector
directly),
please use
Ethernet
Crossover
Cable.
User Controls
English
67
4. In the Properties window, select the General tab, and select Internet
Protocol (TCP/IP).
5. Click Properties.
6. Fill in the IP address and Subnet mask, then press OK.
User Controls
English
68
7. Press the Menu button on the projector.
8. Select OSD-> SETUP-> Network Settings-> Lan Settings.
9. After getting into Network Status, input the following:
4
DHCP: Off
4
IP Address: 10.10.10.10
4
Subnet Mask: 255.255.255.0
4
Gateway: 0.0.0.0
4
DNS: 0.0.0.0
10. Press (Enter) / ► to conrm settings.
11. Open a web browser (ex, Microsoft Internet Explorer with Adobe
Flash Player 9.0 or higher).
12. In the Address bar, input the IP address: 10.10.10.10.
13. Press (Enter) / ►.
The projector is setup for remote management. The LAN/RJ45 function
displays as follows.
v For more
information,
please visit
http://www.
crestron.com
User Controls
English
69
Category Item Input-Length
Crestron Control
IP Address 15
IP ID 3
Port 5
Projector
Projector Name 10
Location 10
Assigned To 10
Network Conguration
DHCP (Enabled) (N/A)
IP Address 15
Subnet Mask 15
Default Gateway 15
DNS Server 15
User Password
Enabled (N/A)
New Password 10
Conrm 10
Admin Password
Enabled (N/A)
New Password 10
Conrm 10
For more information, please visit http://www.crestron.com.
User Controls
English
70
Preparing Email Alerts
1. Make sure that user can access the homepage of LAN RJ45
function by web browser (for ex-ample, Microsoft Internet
Explorer v6.01/v8.0).
2. From the Homepage of LAN/RJ45, click Alert Settings.
3. By default, these input boxes in Alert Settings are blank.
4. For Sending alert mail, input the following:
4
The SMTP eld is the mail server for sending out email
(SMTP protocol). This is a required eld.
4
The To eld is the recipient’s email address (for example,
the projector administrator). This is a required eld.
4
The Cc eld sends a carbon copy of the alert to the
specied email address. This is an optional eld (for
example, the projector administrator’s assistant).
User Controls
English
71
4
The From eld is the sender’s email address (for example,
the projector administrator). This is a required eld.
4
Select the alert conditions by checking the desired boxes.
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal”
communication by dedicated RS232 command control, there is alternative
RS232 command control way, so called “RS232 by TELNET” for LAN/
RJ45 interface.
v Fill in all elds
as specied.
User can click
Send Test
Mail to test
what setting
is correct. For
successful
sending an
email alert,
you must
select alert
conditions and
enter a correct
email address.
User Controls
English
72
Quick Start-Guide for “RS232 by TELNET”
Check and get the IP-Address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that “Windows Firewall” setting to be disabled in case of
“TELNET” function ltering out by laptop/PC.
1. Start => All Programs => Accessories => Command Prompt.
2. Input the command format like the below:
telnet ttt.xxx.yyy.zzz 23 (“Enter” key pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
3. If Telnet-Connection ready, and user can have RS232
command input, then “Enter” key pressed, the RS232
command will be workable.
User Controls
English
73
How to have TELNET enabled in Windows VISTA / 7
By default installation for Windows VISTA, “TELNET” function is not
included. But end-user can have it by way of “Turn Windows features On
or Off” to be enabled.
1. Open “Control Panel” in Windows VISTA.
2. Open “Programs”.
User Controls
English
74
3 Select “Turn Windows features on or off” to open.
4. Have “Telnet Client” option checked, then press “OK”
button.
Specsheet for “RS232 by TELNET” :
1. Telnet: TCP.
2. Telnet port: 23 (for more detail, kindly please get contact
with the service agent or team).
3. Telnet utility: Windows “TELNET.exe” (console mode).
4. Disconnection for RS232-by-Telnet control normally: Close
Windows Telnet utility directly after TELNET connection
ready.
Limitation 1 for Telnet-Control: there is less than 50 bytes for successive
network payload for Telnet-Control application.
Limitation 2 for Telnet-Control: there is less than 26 bytes for one
complete RS232 command for Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232
command must be more than 200 (ms).
(*, In Windows XP built-in “TELNET.exe” utility, “Enter” key pressed
will have “Carriage-Return” and “New-Line” code.)
User Controls
English
75
Troubleshooting
If you experience a problem with your projector, please refer to the
following information. If a problem persists, please contact your local
reseller or service center.
Image Problems
No image appears on-screen
4
Ensure all the cables and power connections are correctly and
securely connected as described in the Installation section.
4
Ensure all the pins of connectors are not bent or broken.
4
Check if the projection lamp has been securely installed. Please
refer to the Replacing the Lamp section.
4
Make sure you have removed the lens cap and the projector is
switched on.
Partial, scrolling or incorrectly displayed image
4
Press Re-Sync on the remote.
4
If you are using a PC:
For Windows 95, 98, 2000, XP:
1. Open the My Computer icon, the Control Panel folder, and
then double click on the Display icon.
2. Select the Settings tab.
3. Verify that your display resolution setting is lower than or
equal to UXGA (1600 x 1200).
4. Click on the Advanced Properties button.
If the projector is still not projecting the whole image, you
will also need to change the monitor display you are using.
Refer to the following steps.
5. Verify the resolution setting is lower than or equal to UXGA
(1600 x 1200).
6. Select the Change button under the Monitor tab.
7. Click on Show all devices. Next, select Standard monitor
types under the SP box; choose the resolution mode you
need under the “Models” box.
8. Verify that the resolution setting of the monitor display is
lower than or equal to UXGA (1600 x 1200). (*)
Appendices
English
76
4
If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. Example: [Fn]+[F4]
Acer
[Fn]+[F5]
Asus [Fn]+[F8]
Dell
[Fn]+[F8]
Gateway [Fn]+[F4]
Mac Apple:
System Preference Display Arrangement Mirror
display
IBM/Lenovo
[Fn]+[F7]
[Fn]+[F4]
HP/Compaq
NEC
[Fn]+[F3]
Toshiba [Fn]+[F5]
If you experience difculty changing resolutions or your
monitor freezes, restart all equipment including the projector.
The screen of the Notebook or PowerBook computer
is not displaying your presentation
4
If you are using a Notebook:
Some Notebooks may deactivate their own screens when a
second display device is in use. Each has a different way to
be reactivated. Refer to your computer’s manual for detailed
information.
Image is unstable or ickering
4
Use Phase to correct it. See page 49 for more information.
4
Change the monitor color setting on your computer.
Image has vertical ickering bar
4
Use Frequency to make an adjustment. See page 49 for more
information.
4
Check and recongure the display mode of your graphic card
to make it compatible with the projector.
Image is out of focus
4
Make sure the lens cap is removed.
4
Adjusts the Focus Ring on the projector lens.
4
Make sure the projection screen is between the required
distances from the projector. See pages 25-27 for more
information.
Appendices
English
77
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will
show the best image in 16:9 format in OSD. If you play 4:3 format
DVD title, please change the format as 4:3 in projector OSD. If the
image is still stretched, you will also need to adjust the aspect ratio
by referring to the following:
4
Please setup the display format as 16:9 (wide) aspect ratio type
on your DVD player.
Image is too small or too large
4
Adjust the Zoom Ring on the top of the projector.
4
Move the projector closer to or further from the screen.
4
Press Menu button on the remote control or projector panel, go
to Display | Format and try the different settings.
Image has slanted sides
4
If possible, reposition the projector so that it is centered on the
screen and below the bottom of the screen.
4
Press Keystone +/- on the remote control until the sides are
vertical.
Image is reversed
4
Select Setup | Projection from the OSD and adjust the
projection direction.
Intermission Problems
The projector stops responding to all controls
4
If possible, turn off the projector, then unplug the power cord
and wait at least 60 seconds before reconnecting power.
Lamp burns out or makes a popping sound
4
When the lamp reaches its end of life, it will burn out and
may make a loud popping sound. If this happens, the
projector will not turn on until the lamp module has been
replaced. To replace the lamp, follow the procedures in
Replacing the Lamp on page 81.
Appendices
English
78
HDMI Q & A
What is the difference between a “Standard” HDMI
cable and a “High-Speed” HDMI cable?
Recently, HDMI Licensing, LLC announced that cables would be
tested as Standard or High-Speed cables.
4
Standard (or “category 1”) HDMI cables have been tested to
perform at speeds of 75Mhz or up to 2.25Gbps, which is the
equivalent of a 720p/1080i signal.
4
High Speed (or “category 2”) HDMI cables have been tested
to perform at speeds of 340Mhz or up to 10.2Gbps, which
is the highest bandwidth currently available over an HDMI
cable and can successfully handle 1080p signals including
those at increased color depths and/or increased refresh
rates from the Source. High-Speed cables are also able to
accommodate higher resolution displays, such as WQXGA
cinema monitors (resolution of 2560 x 1600).
How do I run HDMI cables longer than 10 meters?
4
There are many HDMI Adopters working on HDMI solutions
that extend a cable’s effective distance from the typical
10 meter range to much longer lengths. These companies
manufacture a variety of solutions that include active cables
(active electronics built into cables that boost and extend the
cable’s signal), repeaters, ampliers as well as CAT5/6 and
ber solutions.
How can I tell if a cable is an HDMI certied cable?
4
All HDMI products are required to be certied by the
manufacturer as part of the HDMI Compliance Test
Specication. However, there may be instances where cables
bearing the HDMI logo are available but have not been
properly tested. HDMI Licensing, LLC actively investigates
these instances to ensure that the HDMI trademark is
properly used in the market. We recommend that consumers
buy their cables from a reputable source and a company that
is trusted.
For more detail information check:
http://www.hdmi.org/learningcenter/faq.aspx#49
Appendices
English
79
Projector Status Indication
Message
Power LED Power LED Temp LED
Lamp LED
(Blue) (Red) (Red) (Red)
Operating
On 0 0 0
Warm up or
Cooling down
Flashing
(0.5 sec)
0 0 0
Standby
0 On 0 0
T1 temperature
over temperature
0
Flashing
On 0
Thermal break
0 4 0 0
Lamp error
0
Flashing
0 On
Fan error
0
Flashing Flashing
0
Lamp door open
0 7 0 0
DMD error
0 8 0 0
Color wheel
error
0 9 0
0
* Power LED will be ON when OSD appears and OFF when OSD
disappears.
The digit represents the number of led blinks.
Appendices
English
80
Message Reminders
4
Replacing the lamp:
4
Out of range: (see the following for more information)
Remote Control Problems
If the remote control does not work
4
Check the operating angle for the remote control is
approximately ±15°.
4
Make sure there are no obstructions between the remote control
and the projector. Move to within 7m (23 ft) of the projector.
4
Make sure the batteries are inserted correctly.
4
Replace weak batteries in the remote control.
Audio Problems
There is no sound
4
Adjust the volume on the remote control.
4
Adjust the volume of the audio source.
4
Check the audio cable connection.
4
Test the source audio output with other speakers.
4
Have the projector serviced.
The sound is distorted
4
Check the audio cable connection.
4
Test the source audio output with other speakers.
4
Have the projector serviced.
Appendices
English
81
Replacing the Lamp
The projection lamp should be replaced when it burns out. It should
only be replaced with a certied replacement part, which you can
order from your local dealer.
Important:
4
The lamp contains a certain amount of mercury and should be
disposed of according to local ordinance regulations.
4
Avoid touching the glass surface of the new lamp, doing so
may shorten its operation life.
Warning:
4
Be sure to turn off and unplug the projector at least an hour before
replacing the lamp. Failure to do so could result in a severe burn.
1
2
3
Appendices
English
82
4
1. Switch off the power to the projector by pressing the Power button.
2. Allow the projector to cool down at least 30 minutes.
3. Disconnect the power cord.
4. Unlock the lamp cover.
5. Pull up and remove the cover.
6. Use a screwdriver to remove the screws from the lamp module.
7. Pull out the lamp module.
To replace the lamp module, reverse the previous steps.
After replacing the lamp, the lamp hours counter must be reset. See
page 63 for more information.
Appendices
English
83
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure
trouble-free operation.
Warning:
4
Be sure to turn off and unplug the projector at least an hour before
cleaning. Failure to do so could result in a severe burn.
4
Use only a dampened cloth when cleaning. Do not allow water to
enter the ventilation openings on the projector.
4
If a little water gets into the projector interior while cleaning, leave
unplugged in a well-ventilated room for several hours before using.
4
If a lot of water gets into the projector interior when cleaning, have
the projector serviced.
Cleaning the Lens
You can purchase optic lens cleaner from most camera stores. Refer
to the following to clean the pro-jector lens.
1. Apply a little optic lens cleaner to a clean soft cloth.
(Do not apply the cleaner directly to the lens.)
2. Lightly wipe the lens in a circular motion.
Caution:
4
Do not use abrasive cleaners or solvents.
4
To prevent discoloration or fading, avoid getting cleaner on the
projector case.
Cleaning the Case
Refer to the following to clean the projector case.
1. Wipe off dust with a clean dampened cloth.
2. Moisten the cloth with warm water and mild detergent (such as
used to wash dishes), and then wipe the case.
3. Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive
alcohol-based cleaners.
Appendices
English
84
Compatibility Modes
Video Compatibility
NTSC NTSC M/J, 3.58MHz, 4.43MHz
PAL PAL B/D/G/H/I/M/N, 4.43MHz
SECAM
SECAM B/D/G/K/K1/L, 4.25/4.4
MHz
SDTV 480i/p, 576i/p
HDTV
720p(50/60Hz), 1080i(50/60Hz),
1080P(50/60Hz)
Video timing detail describe
Signal Resolution
Refresh
Rate(Hz)
Notes
TV(NTSC) 720 X 480 60
For Composite
Video/S-Video
TV(PAL, SECAM) 720 X 576 50
SDTV(480i) 720 X 480 60
For Component
SDTV(480p) 720 X 480 60
SDTV(576i) 720 X 576 50
SDTV(576p) 720 X 576 50
HDTV(720p) 1280 X 720 50/60
HDTV(1080i) 1920 X1080 50/60
HDTV(1080p) 1920 X1080 24/50/60
v For wide
screen
resolution
(WXGA), the
compatibility
support is
dependent on
Notebook/PC
models.
Appendices
English
85
Computer Compatibility - VESA standards
Computer Signal (Analog RGB Compatible
www.optoma.com
Appendices
English
86
Input Signal for HDMI/DVI-D
www.optoma.com
Appendices
English
87
True 3D Video Compatibility table
Input
Resolutions
Input timing
HDMI 1.4a
3D Input
1280 x 720p @50Hz Top - and - Bottom
1280 x 720p @60Hz Top - and - Bottom
1280 x 720p @50Hz Frame packing
1280 x 720p @60Hz Frame packing
1920 x 1080i @50Hz Side- by-Side (Half)
1920 x 1080i @60Hz Side- by-Side (Half)
1920 x 1080p @24Hz Top - and - Bottom
1920 x 1080p @24 Hz Frame packing
HDMI 1.3
1920 x 1080i @50Hz
Side-by-Side
(Half)
SBS mode
is on
1920 x 1080i @60Hz
1280 x 720p @50Hz
1280 x 720p @60Hz
1920 x 1080i @50Hz
Top-and-
Bottom
TAB mode
is on
1920 x 1080i @60Hz
1280 x 720P @50Hz
1280 x 720P @60Hz
480i HQFS
Appendices
English
88
RS232 Commands
RS232 Connector
6789
12345
Pin No Specication
1 N/A
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 N/A
Appendices
English
89
RS232 Protocol Function List
RS232 Commands
Baud Rate : 9600 Note : There is a <CR> after all ASCII commands
Data Bits: 8 0D is the HEX code for <CR> in ASCII code
Parity: None
Stop Bits: 1
Flow Control : None
UART16550 FIFO: Disable
Projector Return (Pass): P
Projector Return (Fail): F XX=01-99, projector's ID, XX=00 is for all projectors
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SEND to projector
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
232 ASCII Code HEX Code Function Description
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX00 1 7E 30 30 30 30 20 31 0D Power ON
~XX00 0 7E 30 30 30 30 20 30 0D Power OFF (0/2 for backward compatible)
~XX00 1 ~nnnn 7E 30 30 30 30 20 31 20 a 0DPower ON with Password ~nnnn = ~0000 (a=7E 30 30 30 30)
~9999 (a=7E 39 39 39 39)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX01 1 7E 30 30 30 31 20 31 0D Resync
~XX02 1 7E 30 30 30 32 20 31 0D AV Mute On
~XX02 0 7E 30 30 30 32 20 30 0D Off (0/2 for backward compatible)
~XX03 1 7E 30 30 30 33 20 31 0D Mute On
~XX03 0 7E 30 30 30 33 20 30 0D Off (0/2 for backward compatible)
~XX04 1 7E 30 30 30 34 20 31 0D Freeze
~XX04 0 7E 30 30 30 34 20 30 0D Unfreeze (0/2 for backward compatible)
~XX05 1 7E 30 30 30 35 20 31 0D Zoom Plus
~XX06 1 7E 30 30 30 36 20 31 0D Zoom Minus
~XX12 1 7E 30 30 31 32 20 31 0D Direct Source Commands HDMI
~XX12 2 7E 30 30 31 32 20 32 0D DVI-D
~XX12 4 7E 30 30 31 32 20 34 0D BNC
~XX12 5 7E 30 30 31 32 20 35 0D VGA1
~XX12 6 7E 30 30 31 32 20 36 0D VGA 2
~XX12 8 7E 30 30 31 32 20 38 0D VGA1 Component
~XX12 9 7E 30 30 31 32 20 39 0D S-Video
~XX12 10 7E 30 30 31 32 20 31 30 0D Video
~XX12 13 7E 30 30 31 32 20 31 33 0D VGA 2 Component
~XX12 14 7E 30 30 31 32 20 31 34 0D Component
~XX12 20 7E 30 30 31 32 20 32 30 0D DisplayPort
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX20 1 7E 30 30 32 30 20 31 0D Display Mode Presentation
~XX20 2 7E 30 30 32 30 20 32 0D Bright
~XX20 3 7E 30 30 32 30 20 33 0D Movie
~XX20 4 7E 30 30 32 30 20 34 0D sRGB
~XX20 5 7E 30 30 32 30 20 35 0D User
~XX20 7 7E 30 30 32 30 20 37 0D Blackboard
~XX20 13 7E 30 30 32 30 21 33 0D DICOM SIM.
~XX20 9 7E 30 30 32 30 20 39 0D 3D
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX21 n 7E 30 30 32 31 20 a 0D Brightness n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX22 n 7E 30 30 32 32 20 a 0D Contrast n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX23 n 7E 30 30 32 33 20 a 0D Sharpness n = 1 (a=31) ~ 15 (a=31 35)
~XX44 n 7E 30 30 34 34 20 a 0D Tint n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX45 n 7E 30 30 34 35 20 a 0D Color n = -50 (a=2D 35 30) ~ 50 (a=35 30)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX327 n 7E 58 58 33 32 37 20 a 0D Color Matching Red Hue n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX328 n 7E 58 58 33 32 38 20 a 0D Green Hue n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX329 n 7E 58 58 33 32 39 20 a 0D Blue Hue n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX330 n 7E 58 58 33 33 30 20 a 0D Cyan Hu n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX331 n 7E 58 58 33 33 31 20 a 0D Yellow Hue n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX332 n 7E 58 58 33 33 32 20 a 0D Magenta Hue n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX333 n 7E 58 58 33 33 33 20 a 0D Cyan Hue n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX333 n 7E 58 58 33 33 33 20 a 0D Red Saturation n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX334 n 7E 58 58 33 33 34 20 a 0D Green Saturation n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX335 n 7E 58 58 33 33 35 20 a 0 Blue Saturation n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX336 n 7E 58 58 33 33 36 20 a 0D Cyan Saturation n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX337 n 7E 58 58 33 33 37 20 a 0D Yellow Saturation n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX338 n 7E 58 58 33 33 38 20 a 0D Magenta Saturationn n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX339 n 7E 58 58 33 33 39 20 a 0D Red Gain n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX340 n 7E 58 58 33 34 30 20 a 0D Green Gain n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX341 n 7E 58 58 33 34 31 20 a 0D Blue Gain n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX342 n 7E 58 58 33 34 32 20 a 0D Cyan Gain n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX343 n 7E 58 58 33 34 33 20 a 0D Yellow Gain n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX344 n 7E 58 58 33 34 34 20 a 0D Magenta Gain n=--127(a=2d 31 32 37)~127(a=31 32 37)
~XX345 n 7E 58 58 33 34 35 20 a 0D White/R n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX346 n 7E 58 58 33 34 36 20 a 0D White/G n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX347 n 7E 58 58 33 34 37 20 a 0D White/B n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX215 1 7E 30 30 32 31 35 20 31 0D Reset
~XX24 n 7E 30 30 32 34 20 a 0D RGB Gain/Bias Red Gain n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX25 n 7E 30 30 32 35 20 a 0D Green Gain n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX26 n 7E 30 30 32 36 20 a 0D Blue Gain n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX27 n 7E 30 30 32 37 20 a 0D Red Bias n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX28 n 7E 30 30 32 38 20 a 0D Green Bias n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX29 n 7E 30 30 32 39 20 a 0D Blue Bias n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX33 n 7E 30 30 33 33 20 a 0D Reset n = -50 (a=2D 35 30) ~ 50 (a=35 30)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX34 n 7E 30 30 33 34 20 a 0D BrilliantColor
TM
n = 1 (a=31) ~ 10 (a=31 30)
~XX196 n 7E 30 30 31 39 36 20 a 0D Noise Reduction n = 1 (a=31) ~ 10 (a=31 30)
~XX35 1 7E 30 30 33 35 20 31 0D Gamma Film
~XX35 3 7E 30 30 33 35 20 33 0D Graphics
~XX35 5 7E 30 30 33 35 20 35 0D 1.8
~XX35 6 7E 30 30 33 35 20 36 0D 2.0
~XX35 7 7E 30 30 33 35 20 37 0D 2.2
v Due to the
difference
application for
each model.
Function is
dependent
on the model
purchased.
Appendices
English
90
~XX35 8 7E 30 30 33 35 20 38 0D 2.6
~XX35 9 7E 30 30 33 35 20 39 0D 3D
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX36 3 7E 30 30 33 36 20 30 0D Color Temp. Warm
~XX36 0 7E 30 30 33 36 20 31 0D Standard
~XX36 1 7E 30 30 33 36 20 32 0D Cool
~XX36 2 7E 30 30 33 36 20 33 0D Cold
~XX37 1 7E 30 30 33 37 20 31 0D Color Space Auto
~XX37 2 7E 30 30 33 37 20 32 0D RGB\ RGB(0-255)
~XX37 3 7E 30 30 33 37 20 33 0D YUV
~XX37 4 7E 30 30 33 37 20 34 0D RGB(16 - 235)
~XX73 n 7E 30 30 37 33 20 a 0D Signal (RGB) Frequency n = -5 (a=2D 35) ~ 5 (a=35) By signal
~XX74 n 7E 30 30 37 34 20 a 0D Phase n = 0 (a=30) ~ 31 (a=33 31) By signal
~XX91 1 7E 30 30 39 31 20 31 0D Automatic Enable
~XX91 0 7E 30 30 39 31 20 30 0D Disable
~XX75 n 7E 30 30 37 35 20 a 0D H. Position n = -5 (a=2D 35) ~ 5 (a=35) By timing
~XX76 n 7E 30 30 37 36 20 a 0D V. Position n = -5 (a=2D 35) ~ 5 (a=35) By timing
~XX200 n 7E 30 30 32 30 30 20 a 0D Signal(Video) White Level
~XX201 n 7E 30 30 32 30 30 21 a 0D Black Level
~XX204 1 7E 30 30 32 30 30 21 31 0D 0
~XX204 0 7E 30 30 32 30 30 21 30 0D 7.5
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX60 1 7E 30 30 36 30 20 31 0D Format 4:3
~XX60 2 7E 30 30 36 30 20 32 0D 16:9
~XX60 3 7E 30 30 36 30 20 33 0D 16:10(WXGA/WUXGA Model)
~XX60 5 7E 30 30 36 30 20 35 0D LBX
~XX60 6 7E 30 30 36 30 20 36 0D Native
~XX60 7 7E 30 30 36 30 20 37 0D Auto
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX62 n 7E 30 30 36 32 20 a 0D Digital Zoom Zoom n = -5 (a=2D 35) ~ 25 (a=32 35)
~XX504 n 7E 58 58 35 30 34 20 a 0D H Zoom n = 0 (a=30) ~ 100 (a=31 30 30)
~XX505 n 7E 58 58 35 30 35 20 a 0D V Zoom n = 0 (a=30) ~ 100 (a=31 30 30)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX61 n 7E 30 30 36 31 20 a 0D Edge mask n = 0 (a=30) ~ 10 (a=31 30)
~XX63 n 7E 30 30 36 33 20 a 0D H Image Shift n = -100 (a=2D 31 30 30) ~ 100 (a=31 30 30)
~XX64 n 7E 30 30 36 34 20 a 0D V Image Shift n = -100 (a=2D 31 30 30) ~ 100 (a=31 30 30)
~XX66 n 7E 30 30 36 36 20 a 0D V Keystone n = -40 (a=2D 34 30) ~ 40 (a=34 30)
~XX230 1 7E 30 30 32 33 30 20 31 0D 3D Mode DLP-Link
~XX230 3 7E 30 30 32 33 30 20 33 0D IR
~XX400 0 7E 30 30 34 30 30 20 30 0D 3D2D 3D
~XX400 1 7E 30 30 34 30 30 20 31 0D L
~XX400 2 7E 30 30 34 30 30 20 32 0D R
~XX405 0 7E 30 30 34 30 35 20 30 0D 3D Format Auto
~XX405 1 7E 30 30 34 30 35 20 31 0D SBS
~XX405 2 7E 30 30 34 30 35 20 32 0D Top and Bottom
~XX405 3 7E 30 30 34 30 35 20 33 0D Frame sequential
~XX231 0 7E 30 30 32 33 31 20 30 0D 3D Sync Invert On
~XX231 1 7E 30 30 32 33 31 20 31 0D Off
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX70 1 7E 30 30 37 30 20 31 0D Language English
~XX70 2 7E 30 30 37 30 20 32 0D German
~XX70 3 7E 30 30 37 30 20 33 0D French
~XX70 4 7E 30 30 37 30 20 34 0D Italian
~XX70 5 7E 30 30 37 30 20 35 0D Spanish
~XX70 6 7E 30 30 37 30 20 36 0D Portuguese
~XX70 7 7E 30 30 37 30 20 37 0D Polish
~XX70 8 7E 30 30 37 30 20 38 0D Dutch
~XX70 9 7E 30 30 37 30 20 39 0D Swedish
~XX70 10 7E 30 30 37 30 20 31 30 0D Norwegian/Danish
~XX70 11 7E 30 30 37 30 20 31 31 0D Finnish
~XX70 12 7E 30 30 37 30 20 31 32 0D Greek
~XX70 13 7E 30 30 37 30 20 31 33 0D Traditional Chinese
~XX70 14 7E 30 30 37 30 20 31 34 0D Simplified Chinese
~XX70 15 7E 30 30 37 30 20 31 35 0D Japanese
~XX70 16 7E 30 30 37 30 20 31 36 0D Korean
~XX70 17 7E 30 30 37 30 20 31 37 0D Russian
~XX70 18 7E 30 30 37 30 20 31 38 0D Hungarian
~XX70 19 7E 30 30 37 30 20 31 39 0D Czechoslovak
~XX70 20 7E 30 30 37 30 20 32 30 0D Arabic
~XX70 21 7E 30 30 37 30 20 32 31 0D Thai
~XX70 22 7E 30 30 37 30 20 32 32 0D Turkish
~XX70 23 7E 30 30 37 30 20 32 33 0D Farsi
~XX70 25 7E 30 30 37 30 20 32 35 0D Vietnamese
~XX70 26 7E 30 30 37 30 20 32 36 0D Indonesian
~XX70 27 7E 30 30 37 30 20 32 37 0D Romanian
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX71 1 7E 30 30 37 31 20 31 0D Projection Front-Desktop
~XX71 2 7E 30 30 37 31 20 32 0D Rear-Desktop
~XX71 3 7E 30 30 37 31 20 33 0D Front-Ceiling
~XX71 4 7E 30 30 37 31 20 34 0D Rear-Ceiling
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX72 1 7E 30 30 37 32 20 31 0D Menu Location Top Left
~XX72 2 7E 30 30 37 32 20 32 0D Top Right
~XX72 3 7E 30 30 37 32 20 33 0D Centre
~XX72 4 7E 30 30 37 32 20 34 0D Bottom Left
~XX72 5 7E 30 30 37 32 20 35 0D Bottom Right
Appendices
English
91
(WXGA/WUXGA Model)
~XX90 1 7E 30 30 39 31 20 31 0D Screen Type 16:10
~XX90 0 7E 30 30 39 31 20 30 0D 16:9
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX77 n 7E 30 30 37 37 20 aabbcc 0D Security Security Timer Month/Day/Hour n = mm/dd/hh
mm= 00 (aa=30 30) ~ 12 (aa=31 32)
dd = 00 (bb=30 30) ~ 30 (bb=33 30)
hh= 00 (cc=30 30) ~ 24 (cc=32 34)
~XX78 1 7E 30 30 37 38 20 31 0D Security Settings On
~XX78 0 ~nnnn 7E 30 30 37 38 20 32 20 a 0D Off(0/2 for backward compatible)
~nnnn = ~0000 (a=7E 30 30 30 30)
~9999 (a=7E 39 39 39 39)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a=39 39)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX80 1 7E 30 30 38 30 20 31 0D Mute On
~XX80 0 7E 30 30 38 30 20 30 0D Off (0/2 for backward compatible)
~XX310 0 7E 30 30 33 31 30 20 30 0D Internal Speaker Off
~XX310 1 7E 30 30 33 31 30 20 31 0D On
~XX81 n 7E 30 30 38 31 20 a 0D Volume(Audio) n = 0 (a=30) ~ 10 (a=31 30)
~XX89 0 7E 30 30 38 39 20 30 0D Audio Input Default
~XX89 1 7E 30 30 38 39 20 31 0D Audio1
~XX89 3 7E 30 30 38 39 20 33 0D Audio2
~XX89 4 7E 30 30 38 39 20 34 0D Audio3
~XX89 5 7E 30 30 38 39 20 35 0D Audio4
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX82 1 7E 30 30 38 32 20 31 0D Logo Optoma
~XX82 2 7E 30 30 38 32 20 32 0D User
~XX82 3 7E 30 30 38 32 20 33 0D Neutral
~XX83 1 7E 30 30 38 33 20 31 0D Logo Capture
~XX88 0 7E 30 30 38 38 20 30 0D Closed Captioning Off
~XX88 1 7E 30 30 38 38 20 31 0D cc1
~XX88 2 7E 30 30 38 38 20 32 0D cc2
~XX87 1 7E 30 30 38 37 20 31 0D Network Status(Read only Return :Oka, a=0/1 Disconnected/ Connected.
~XX87 3 7E 30 30 38 37 20 33 0D IP Address(Read only) Return: “Okaaa_bbb_ccc_ddd”
~XX454 0/2 7E 30 30 34 35 34 20 30(32) 0D Crestron Off
~XX454 1 7E 30 30 34 35 34 20 31 0D On
~XX455 0/2 7E 30 30 34 35 35 20 30(32) 0D Extron Off
~XX455 1 7E 30 30 34 35 35 20 31 0D On
~XX456 0/2 7E 30 30 34 35 36 20 30(32) 0D PJLink Off
~XX456 1 7E 30 30 34 35 36 20 31 0D On
~XX457 0/2 7E 30 30 34 35 37 20 30(32) 0D AMX Device Discovery Off
~XX457 1 7E 30 30 34 35 37 20 31 0D On
~XX458 0/2 7E 30 30 34 35 38 20 30(32) 0D Telnet Off
~XX458 1 7E 30 30 34 35 38 20 31 0D On
~XX459 0/2 7E 30 30 34 35 38 20 30(32) 0D HTTP Off
~XX459 1 7E 30 30 34 35 38 20 31 0D On
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX39 1 7E 30 30 33 39 20 31 0D Input Source HDMI
~XX39 2 7E 30 30 33 39 20 32 0D DVI-D
~XX39 3 7E 30 30 33 39 20 34 0D BNC
~XX39 5 7E 30 30 33 39 20 35 0D VGA1
~XX39 6 7E 30 30 33 39 20 36 0D VGA2
~XX39 8 7E 30 30 33 39 20 38 0D Component
~XX39 9 7E 30 30 33 39 20 39 0D S-video
~XX39 10 7E 30 30 33 39 20 31 30 0D Video
~XX39 15 7E 30 30 33 39 20 31 35 0D DisplayPort
~XX100 1 7E 30 30 31 30 30 20 31 0D Source Lock On
~XX100 0 7E 30 30 31 30 30 20 30 0D Off (0/2 for backward compatible)
~XX101 1 7E 30 30 31 30 31 20 31 0D High Altitude On
~XX101 0 7E 30 30 31 30 31 20 30 0D Off (0/2 for backward compatible)
~XX102 1 7E 30 30 31 30 32 20 31 0D Information Hide On
~XX102 0 7E 30 30 31 30 32 20 30 0D Off (0/2 for backward compatible)
~XX103 1 7E 30 30 31 30 33 20 31 0D Keypad Lock On
~XX103 0 7E 30 30 31 30 33 20 30 0D Off (0/2 for backward compatible)
~XX348 0 7E 30 30 33 34 38 20 30 0D Display Mode Lock Off (0/2 for backward compatible)
~XX348 1 7E 30 30 33 34 38 20 31 0D On
~XX195 0 7E 30 30 31 39 35 20 30 0D Test Pattern None
~XX195 1 7E 30 30 31 39 35 20 31 0D Grid(White)
~XX195 3 7E 30 30 31 39 35 20 33 0D Grid(Green)
~XX195 4 7E 30 30 31 39 35 20 34 0D Grid(Magenta)
~XX195 2 7E 30 30 31 39 35 20 32 0D White
~XX192 0 7E 30 30 31 39 32 20 30 0D 12V Trigger Off
~XX192 1 7E 30 30 31 39 32 20 31 0D On
~XX192 3 7E 30 30 31 39 32 20 33 0D Auto 3D
~XX11 0 7E 30 30 31 31 20 30 0D IR Function Off
~XX11 1 7E 30 30 31 31 20 31 0D On
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX104 1 7E 30 30 31 30 34 20 31 0D Background Color Blue
~XX104 2 7E 30 30 31 30 34 20 32 0D Black
~XX104 3 7E 30 30 31 30 34 20 33 0D Red
~XX104 4 7E 30 30 31 30 34 20 34 0D Green
~XX104 5 7E 30 30 31 30 34 20 35 0D White
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX105 1 7E 30 30 31 30 35 20 31 0D Advanced Direct Power On On
~XX105 0 7E 30 30 31 30 35 20 30 0D Off (0/2 for backward compatible)
~XX113 0 7E 30 30 31 31 33 20 30 0D Signal Power On Off
~XX113 1 7E 30 30 31 31 33 20 31 0D On
~XX106 n 7E 30 30 31 30 36 20 a 0D Auto Power Off (min) n = 0 (a=30) ~ 180 (a=31 38 30)
Appendices
English
92
(5 minutes for each step).
~XX107 n 7E 30 30 31 30 37 20 a 0D Sleep Timer (min) n = 0 (a=30) ~ 995 (a=39 39 35)
(30 minutes for each step).
~XX114 1 7E 30 30 31 31 34 20 31 0D Power Mode(Standby) Active (<=0.5W)
~XX114 0 7E 30 30 31 31 34 20 30 0D Eco. (0/2 for backward compatible)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX109 1 7E 30 30 31 30 39 20 31 0D Lamp Reminder On
~XX109 0 7E 30 30 31 30 39 20 30 0D Off (0/2 for backward compatible)
~XX110 1 7E 30 30 31 31 30 20 31 0D Brightness Mode Bright
~XX110 2 7E 30 30 31 31 30 20 32 0D Eco
~XX110 5 7E 30 30 31 31 30 20 35 0D Power
~XX326 n 7E 30 30 33 32 36 20 a 0D Power 350W/340W/330W/320W/310W/300W/290W/280W
(n=0/n=1/n=2/n=3/n=4/n=5/n=6/n=7/n=8)
~XX111 1 7E 30 30 31 31 31 20 31 0D Lamp Reset Yes
~XX111 0 7E 30 30 31 31 31 20 30 0D No (0/2 for backward compatible)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX112 1 7E 30 30 31 31 32 20 31 0D Reset Yes
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX99 1 7E 30 30 39 39 20 31 0D RS232 Alert Reset Reset System Alert
~XX210 n 7E 30 30 32 30 30 20 n 0D Display message on the OSD n: 1-30 characters
-----------------------------------------------------------------------------------------------------------------------------------------------------------
SEND to emulate Remote
~XX140 10 7E 30 30 31 34 30 20 31 30 0D Up
~XX140 11 7E 30 30 31 34 30 20 31 31 0D Left
~XX140 12 7E 30 30 31 34 30 20 31 32 0D Enter (for projection MENU)
~XX140 13 7E 30 30 31 34 30 20 31 33 0D Right
~XX140 14 7E 30 30 31 34 30 20 31 34 0D Down
~XX140 15 7E 30 30 31 34 30 20 31 35 0D Keystone +
~XX140 16 7E 30 30 31 34 30 20 31 36 0D Keystone –
~XX140 17 7E 30 30 31 34 30 20 31 37 0D Volume –
~XX140 18 7E 30 30 31 34 30 20 31 38 0D Volume +
~XX140 19 7E 30 30 31 34 30 20 31 39 0D Brightness
~XX140 20 7E 30 30 31 34 30 20 32 30 0D Menu
~XX140 21 7E 30 30 31 34 30 20 32 31 0D Zoom
~XX140 28 7E 30 30 31 34 30 20 32 38 0D Contrast
~XX140 47 7E 30 30 31 34 30 20 34 37 0D Source
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SEND from projector automatically
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
232 ASCII Code HEX Code Function Projector Return Description
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
when Standby/Warming/Cooling/Out of
Range/Lamp fail/Fan Lock/Over Temperature/
Lamp Hours Running Out/Cover Open
INFOn n : 0/1/2/3/4/6/7/8/ =
Standby/Warming/Cooling/Out
of Range/Lamp fail/Fan
Lock/Over Temperature/Lamp Hours Running Out/Cover Open
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
READ from projector
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
232 ASCII Code HEX Code Function Projector Return Description
~XX121 1 7E 30 30 31 32 31 20 31 0D Input Source Commands OKn n: 0/1/2/3/4/5/7/10/15 =
None/DVI/VGA1/VGA2/S-Video/Video/BNC/HDMI/Component/DisplayPor
t
~XX122 1 7E 30 30 31 32 32 20 31 0D Sofware Version OKdddd dddd: FW version
~XX123 1 7E 30 30 31 32 33 20 31 0D Display Mode OKn n : 0/1/2/3/4/7/9/12
None/Presentation/Bright/Movie/sRGB/Blackboard/DICOM SIM./3D
~XX124 1 7E 30 30 31 32 34 20 31 0D Power State OKn n : 0/1 = Off/On
~XX125 1 7E 30 30 31 32 35 20 31 0D Brightness OKn
~XX126 1 7E 30 30 31 32 36 20 31 0D Contrast OKn
~XX127 1 7E 30 30 31 32 37 20 31 0D Format OKn n: 1/2/3/5/6/7 =4:3/16:9/16:10/LBX/Native/Auto
*16:9 or 16:10 depend on Screen Type setting
~XX128 1 7E 30 30 31 32 38 20 31 0D Color Temperature OKn n :3/0/1/2 = Warm/Standard/Cool/Cold
~XX129 1 7E 30 30 31 32 39 20 31 0D Projection Mode OKn n : 0/1/2/3 = Front-Desktop/ Rear-Desktop/ Front-Ceiling/ Rear-Ceiling
~XX150 1 7E 30 30 31 35 30 20 31 0D Information OKabbbbccdddde
a : 0/1 = Off/On
bbbb: LampHour
cc: source 00/01/02/03/04/05/07/10/15 =
None/DVI/VGA1/VGA2/S-Video/Video/BNC/HDMI/Component/DisplayPort
dddd: FW version
e : Display mode 0/1/2/3/4/7/9/10=
None/Presentation/Bright/Movie/sRGB/Blackboard/3D/DICOM.
~XX151 1 7E 30 30 31 35 31 20 31 0D Model name OKn n:1/2/3=X605/W505/EH505
~XX108 1 7E 30 30 31 30 38 20 31 0D Lamp Hours OKbbbb bbbb: LampHour
~XX108 2 7E 30 30 31 30 38 20 31 0D Cumulative Lamp Hours OKbbbbb bbbbb: (5 digits) Total Lamp Hours
~XX87 1 7E 30 30 38 37 20 31 0D Network Status Okn n=0/1
Disconnected/Connected
~XX87 3 7E 30 30 38 37 20 33 0D IP Address Okaaa_bbb_ccc_ddd
Appendices
English
93
Telnet Commands
4
Port: support 3 ports of 23/1023/2023
4
Multi-connections: Projector could receive commands from different
ports at the same time
4
Command Format: Follow RS232 command format (support both of
ASCII and HEX)
4
Command Response: Follow RS232 return message.
Lead
Code
Projector
ID
Command ID Space Variable
Carriage
Return
~ X X X X X n CR
Fix code
One
Digit~
00
Dened by
Optoma 2 or 3
Digit. See the
Follow content
One Digit
Per item
Denition
Fix code
One
Digit
v For wide screen resolution (WXGA), the compatibility support is
dependent on Notebook/PC models.
AMX Device Discovery commands
4
DP : 239.255.250.250
4
Port No. : 9131
4
Each UDP broadcast information as below are updated around 40
seconds
Command Description Remark (Parameter)
Device-UUID MAC address (Hex value
without’ ‘:’ separator)
12 digits
Device-SKDClass The Duet DeviceSdk class name VideoProjector
Device-Make Maker name MakerPXLW
Device-Model Model name Projector
Appendices
English
94
Command Description Remark (Parameter)
Cong-URL Device’s IP address
LAN IP address is shown up if
LAN IP address is valid.
Wireless LAN IP address is
shown up if Wireless LAN IP
address is valid.
http://xxx.xxx.xxx.
xxx/index.html
Revision The revision must follow a
major.minor.micro scheme. The
revision is only increased if the
command protocol is modied.
1.0.0
v For wide screen resolution (WXGA), the compatibility support is
dependent on Notebook/PC models.
v This AMX function is only to support AMX Device Discovery.
v The broadcast information only send out through valid interface.
v Both LAN and Wireless LAN interfaces could be supported at
the same time.
v If “Beacon Validator” was used. Please take care below
information.
PJLink™ supported commands
The table below shows commands to control the projector using the
PJLink™ protocol.
Command Description Remark (Parameter)
Command Description Remark (Parameter)
POWR Power control
0 = Standby
1 = Power on
POWR? Inquiry about the
power state
0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up
INPT INPT Input switching
11 = VGA1
Appendices
English
95
Command Description Remark (Parameter)
INPT? Inquiry about input
switching
12 = VGA2
13 = Component
14 = BNC
21 = VIDEO
22 = S-VIDEO
31 = HDMI 1
32 = HDMI 2
AVMT Mute control 30 = Video and audio mute
disable
AVMT? Inquiry about the
mute state
31 = Video and audio mute enable
ERST? Inquiry about the
error state
1st byte: Fan error, 0 or 2
2nd byte: Lamp error, 0 to 2
3rd byte: Temperature error, 0
or 2
4th byte: Cover open error, 0 or 2
5th byte: Filter error, 0 or 2
6th byte: Other error, 0 or 2
0 to 2 mean as follows:
0 = No error detected, 1 =
Warning, 2 = Error
LAMP? Inquiry about the
lamp state
1st value (1 to 5 digits):
Cumulative LAMP operating
time (This item shows a lamp
operating time (hour) calculated
based on that LAMP MODE is
LOW.)
2nd value: 0 = Lamp off, 1 = Lamp
on
INST? Inquiry about the
available inputs
The following value is returned.
“11 12 21 22 31 32”
NAME? Inquiry about the
projector name
The projector name set on
the NETWORK menu or the
ProjectorView
Setup window is returned
INF1? Inquiry about the
manufacturer name
“Optoma” is returned.
INF2? Inquiry about the
model name
“EH7700” is returned.
v This projector
is fully
compliant
to the
specications
of JBMIA
PJLink™
Class 1. It
supports all
the commands
dened by
PJLink™ Class
1, and the
compliance
has been
veried with
the PJLink™
standard
specications
Version 1.0.
Appendices
English
96
Command Description Remark (Parameter)
INF0? Inquiry about other
information
No other information is available.
No parameter is returned.
CLSS? Inquiry about the
class information
“1” is returned.
Trademarks
4
DLP is trademarks of Texas Instruments.
4
IBM is a trademark or registered trademark of International
Business Machines Corporation.
4
Macintosh, Mac OS X, iMac, and PowerBook are trademarks of
Apple Inc., registered in the U.S. and other countries.
4
Microsoft, Windows, Windows Vista, Internet Explorer and
PowerPoint are either a registered trademark or trademark of
Microsoft Corporation in the United States and/or other countries.
4
HDMI, the HDMI Logo and High-Denition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
4
AMX Device Discovery
The pro.jector is monitored and controlled by the control system of
AMX.
4
Crestron RoomView Connected™
The projector is monitored and controlled by the control system and
software of Crestron Electronics, Inc.
4
PJLink™
PJLink trademark is a trademark applied for registration or is
already registered in Japan, the United States of America and other
countries and areas.
This projector supports standard protocol PJLink™ for projector
control and you can control and monitor projector’s operations
using the same application among projectors of different models
and different manufacturers.
4
Other product and company names mentioned in this user’s
manual may be the trademarks or registered trademarks of their
respective holders.
4
About Crestron RoomView Connected™
Electronics, Inc. to facilitate conguration of the control system of
Crestron and its target devices.
For details, see the website of Crestron Electronics, Inc.
URL http://www.crestron.com
URL http://www.crestron.com/getroomview/
Appendices
English
97
Ceiling Installation
To prevent damage to your projector please use the recommended
mounting package for installation.
To ensure compliance, only use a UL Listed ceiling mount and
screws that meet the following specications:
4
Screw Type: M4
4
Maximum screw length: 11 mm
4
Minimum screw length: 9 mm
Refer to the following diagram to ceiling mount the projector.
68.50
100.00
160.50
141.50
141.50
88.00
26.50
165.00
354.41
85.49
20.00
130.00
240.00
260.00
430.97
( 1.024" )
( 1.697" )
( 0.945" )
( 0.512" )
( 0.079" )
( 0.337" )
( 0.557" )
( 0.632" )
160.50
( 0.632" )
( 0.557" )
( 0.270" ) ( 0.394" )
( 0.650" )
( 1.395" )
( 0.104" )
( 0.346" )
v Damage to the
projector as a
result of
incorrect
installation
voids the
warranty.
v Ensure at least
10cm clearance
between the
ceiling and the
underside of
the projector.
v Avoid locating
the projector
near heat
sources such as
air conditioning
and heaters.
Excess heat
may cause the
projector to
power off.
Appendices
English
98
Optoma Global Ofces
For service or support please contact your local ofce.
USA
3178 Laurelview Ct.
Fremont, CA 94538, USA
Tel : 888-289-6786 Fax : 510-897-8601
www.optomausa.com Service : services@optoma.com
Canada
2420 Meadowpine Blvd., Suite #105
Mississauga, ON, L5N 6S2, Canada
Tel : 888-289-6786 Fax : 510-897-8601
www.optoma.ca Service : services@optoma.com
Europe
42 Caxton Way, The Watford Business Park
Watford, Hertfordshire, WD18 8QZ, UK
Tel : +44 (0) 1923 691 800 Fax : +44 (0) 1923 691 888
www.optoma.eu
Service Tel : +44 (0)1923 691865 Service : service@tsc-europe.com
France
Bâtiment E 81-83 avenue Edouard Vaillant
92100 Boulogne Billancourt, France
Tel.: +33 1 41 46 12 20 Fax : +33 1 41 46 94 35
Service : savoptoma@optoma.fr
Spain
C/ José Hierro,36 Of. 1C
28522 Rivas VaciaMadrid, Spain
Tel.: +34 91 499 06 06 Fax : +34 91 670 08 32
Deutschland
Werftstrasse 25 D40549
Düsseldorf, Germany
Tel : +49 (0) 211 506 6670 Fax : +49 (0) 211 506 66799
Service : info@optoma.de
Appendices
English
99
Scandinavia
Optoma Scandinavia AS
Lerpeveien 25
3040 Drammen
Norway
PO.BOX 9515
3038 Drammen
Norway
Tel : +4732988990 Fax : +4732988999
Service : info@optoma.no
Latin America
3178 Laurelview Ct.
Fremont, CA 94538, USA
Tel : 888-289-6786 Fax : 510-897-8601
www.optomausa.com.br Service : www.optomausa.com.mx
Korea
WOOMI TECH.CO.,LTD
4F,Minu Bldg.3.tw3-14, Kangnam-Ku, seoul,135-815, KOREA
Tel : +82+2+34430004 Fax : +82+2+34430005
Japan
東京都足立区綾瀬3-25-18
株式会社オーエスエム
サポートセンター:0120-46-5040
E-mail : info@osscreen.com www.os-worldwide.com
Taiwan
231, 新北市新店區北新路321512
Tel : +886-2-8911-8600 Fax : +886-2-8911-9770
www.optoma.com.tw asia.optoma.com
Service : services@optoma.com.tw
Hong Kong
Unit A, 27/F Dragon Centre, 79 Wing Hong Street,
Cheung Sha Wan, Kowloon, Hong Kong
Tel : +852-2396-8968 Fax : +852-2370-1222
www.optoma.com.hk
China
5F, No. 1205, Kaixuan Rd., Changning District
Shanghai, 200052, China
Tel : +86-21-62947376 Fax : +86-21-62947375
www.optoma.com.cn
Appendices
English
100
Regulation & Safety notices
This appendix lists the general notices of your projector.
FCC notice
This device has been tested and found to comply with the limits for
a Class B digital device pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful
interference to radio or television reception, which can be
determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
4
Reorient or relocate the receiving antenna.
4
Increase the separation between the device and receiver.
4
Connect the device into an outlet on a circuit different from that
to which the receiver is connected.
4
Consult the dealer or an experienced radio/television technician
for help.
Notice: Shielded cables
$OOFRQQHFWLRQVWRRWKHUFRPSXWLQJGHYLFHVPXVWEH
PDGHXVLQJVKLHOGHGFDEOHVWRPDLQWDLQFRPSOLDQFH
ZLWK)&&UHJXODWLRQV
Caution
&KDQJHVRUPRGLᚏFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKH
PDQXIDFWXUHUFRXOGYRLGWKHXVHUಬVDXWKRULW\ZKLFKLV
JUDQWHGE\WKH)HGHUDO&RPPXQLFDWLRQV&RPPLVVLRQ
WRRSHUDWHWKLVSURMHFWRU
Appendices
English
101
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numerique de la classe B est conforme a la norme
NMB-003 du Canada.
Declaration of Conformity for EU countries
4
EMC Directive 2004/108/EC (including amendments)
4
Low Voltage Directive 2006/95/EC
4
R & TTE Directive 1999/5/EC (if product has RF function)
Disposal instructions
Do not throw this electronic device into the
trash when discarding. To minimize pollution
and ensure utmost protection of the global
environment, please recycle it.
Appendices
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma EH503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma EH503 in the language / languages: English as an attachment in your email.

The manual is 11,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Optoma EH503

Optoma EH503 User Manual - German - 101 pages

Optoma EH503 User Manual - Dutch - 101 pages

Optoma EH503 User Manual - French - 101 pages

Optoma EH503 User Manual - Italian - 101 pages

Optoma EH503 User Manual - Polish - 101 pages

Optoma EH503 User Manual - Turkish - 101 pages

Optoma EH503 User Manual - Spanish - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info