721782
74
Zoom out
Zoom in
Previous page
1/79
Next page
English
74
APPENDICES
PJLink™ Supported Commands
The table below shows commands to control the projector using the PJLink™ protocol.
Command Description Remark (Parameter)
Command Description Remark (Parameter)
POWR Power control
0 = Standby
1 = Power on
POWR? Inquiry about the power state
0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up
INPT INPT Input switching
11 = VGA1
INPT? Inquiry about input switching
12 = VGA2
13 = Component
14 = BNC
21 = VIDEO
22 = S-VIDEO
31 = HDMI 1
32 = HDMI 2
AVMT Mute control
30 = Video and audio mute disable
AVMT? Inquiry about the mute state
31 = Video and audio mute enable
ERST? Inquiry about the error state
1st byte: Fan error, 0 or 2
2nd byte: Lamp error, 0 to 2
3rd byte: Temperature error, 0 or 2
4th byte: Cover open error, 0 or 2
5th byte: Filter error, 0 or 2
6th byte: Other error, 0 or 2
0 to 2 mean as follows:
0 = No error detected, 1 = Warning, 2 = Error
LAMP? Inquiry about the lamp state 1st value (1 to 5 digits): Cumulative LAMP operating time (This item shows a
lamp operating time (hour) calculated based on that LAMP MODE is LOW.)
2nd value: 0 = Lamp o󺦲, 1 = Lamp on
INST? Inquiry about the available inputs The following value is returned.
“11 12 21 22 31 32”
NAME? Inquiry about the projector name The projector name set on the NETWORK menu or the ProjectorView
Setup window is returned
INF1? Inquiry about the manufacturer name
“Optoma” is returned.
INF2? Inquiry about the model name
“XXXXX” is returned.
INF0? Inquiry about other information
No other information is available. No parameter is returned.
CLSS? Inquiry about the class information
“1” is returned.
Note:
This projector is fully compliant to the specications of JBMIA PJLink™ Class 1. It supports all the
commands dened by PJLink™ Class 1, and the compliance has been veried with the PJLink™
standard specications Version 1.0.
“XXXXX” shown in the above messages are numbers that vary depending on different models.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma EH460ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma EH460ST in the language / languages: English as an attachment in your email.

The manual is 16,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Optoma EH460ST

Optoma EH460ST User Manual - German - 79 pages

Optoma EH460ST User Manual - Dutch - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info