721782
14
Zoom out
Zoom in
Previous page
1/79
Next page
English
14
INSTALLATION
Powering Off the Projector
1. Press the “
” button on the remote control or (POWER) button on the panel of the projector to
turn off the projector. First push of button will display the following message on the screen.
Press the button again to conrm the shut down. If the button is not pressed, the message will
disappear in 5 seconds.
2. The Power LED ashes green (0.5 sec on, 0.5 sec off) and the fans will speed up during shut down
cooling cycle. The projector reaches stand-by mode as soon as the Power LED steady red.
If you wish to turn the projector back on, you must wait until the projector has completed the cooling
cycle and has entered standby mode. Once in standby mode, simply press
(POWER) button on
the panel of the projector or “ ” on the remote control to restart the projector.
3. Disconnect the power cord from the electrical outlet and the projector only when the projector is in
stand-by mode.
Warning Indicator
When the Lamp LED indicator lights red, the projector will automatically shut itself down. Please
contact your local reseller or service center. See page 66.
When the Temp LED is on a steady (not ashing) red, the projector will automatically shut itself down.
Under normal conditions, the projector can be switched on again after it has cooled down. If the
problem persists, you should contact your local dealer or our service center. See page 66.
Note: Contact the nearest service center if the projector displays these symptoms. See page 77 for more
information.
Adjusting the Projected Image
Adjusting the Projectors Height
The projector is equipped with tilt-adjuster feet for adjusting the image height.
To adjust the angle of the picture, turn the tilt-adjuster right or left until the desired angle has been achieved.
Note:
The projector table or stand should be level and sturdy.
Position the projector so that it is perpendicular to the screen.
For personal safety, please secure the cables properly.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma EH460ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma EH460ST in the language / languages: English as an attachment in your email.

The manual is 16,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Optoma EH460ST

Optoma EH460ST User Manual - German - 79 pages

Optoma EH460ST User Manual - Dutch - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info