492631
33
Zoom out
Zoom in
Previous page
1/42
Next page
SETUP MENU OPTIONS
29
Small – Choose if the center speaker is small. Bass frequencies are not passed to the
center speaker to reduce possible distortion.
Off – Choose if there is no center speaker.
4. Rear Speaker: To set the sound filtering control for the rear speakers. The options are:
Large – Choose if the rear surround speakers are large. Bass frequencies are passed to
the rear speakers.
Small – Choose if the rear surround speakers are small. Bass frequencies are not passed
to the rear speakers to reduce possible distortion.
Off – Choose if there are no rear speakers.
5. Subwoofer: To enable/disable the subwoofer output. The options are:
On – Subwoofer output is enabled.
Off – Subwoofer output is disabled.
6. Channel Delay: To set the delay time for the center, rear speakers and the subwoofer. The
delay is to compensate for the audio propagation time difference caused by the distance
difference of the speakers to the listener.
Press the UP/DOWN ARROW buttons to select the speaker to set the distance difference.
Press the LEFT/RIGHT ARROW buttons to set the distance difference.
Press the SELECT button to confirm the settings and return to the Speaker Setup Page.
The channel delay is the difference between the distance from the listener to the front
speakers and the distance from the listener to the speaker to be configured. For example, if
the distance between the listener and the front main speakers is 60 inches (n in the above
picture), and the distance between the listener and the center speaker is 48 inches (o), the
channel delay for the center speaker is 12 inches (n-o=p). Similarly, if the left surround
speaker is 40 inches (q) away from the listener, the channel delay for the left surround
speaker should be 20 inches (n-q=r).
Distance between the surround speakers and the listener must be shorter than or equal to
that between the front speakers and the listener.
In case the channel delay settings cannot match your speaker configuration, please set all
distance difference to 0 inch and use your receiver/amplifier to set the channel delay.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oppo DV971H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oppo DV971H in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info