Manual Oppo BDP-95 (page 77 of 94) (English)

492638

Zoom out

Zoom in

1/94

SETUP MENU OPTIONS

2. Distance: The speaker distance parameters set delay control for the corresponding audio channel.

The delay is to compensate for the audio propagation time difference caused by the placement of

speakers.

Speaker distance compensation is not required if the A/V receiver has the capability to adjust

channel delay and compensate for speaker distance differences. However, if your receiver does

not have such functions (most receivers do not offer these functions for their multi-channel analog

input), you may adjust them through the player. Speaker distance delay is only applied if the player

is decoding multi-channel audio. If you use bitstream audio output to your A/V receiver, the

bitstream audio is not adjusted for speaker distance delay.

A typical 7.1-channel speaker layout and their speaker distance measurements are displayed as

below:

SBL SBR

Speaker Icons:

FL - Front Left

FR - Front Right

C - Center

SW - Subwoofer

SL - Surround Left

SR - Surround Right

SBL - Surround Back Left

SBR - Surround Back Right

Distances:

1 - Listener to Front

2 - Listener to Center

3 - Listener to Surround Left

In the above diagram, measure the distance (in feet) from the primary listening position to the Front

Left or Front Right Speaker. Enter the distance of the Front Speakers (n in the above picture) into

the “Speaker Configuration” menu.

Next, measure the distance (in feet) from center speaker (o) to the listening position. Move the

cursor to highlight the Center speaker in the Channel Delay setup page, and enter the distance (as

close as possible) in feet. Repeat for each speaker in the system (Center, Surround Left, Surround

Right, Surround Back Left, Surround Back Right and Subwoofer) as available. The player will insert

appropriate delay to make sure sound waves from different speakers arrive at the listener at the

same time.

If the channel delay settings cannot match your speaker configuration, please set all distances to

the same and use your receiver/amplifier to set the channel delay.

NOTE

Starting from the firmware version BDP9x-52-0707 (released on July 13, 2011), It is possible

to independently set distances for each speaker (previously speaker groups were treated as

linked pairs), speaker distances can be set to the actual spatial distance of the speakers

(previously no speaker could be set further from listening position and the Front Left/Right

speakers), speaker distances can now be set in quarter foot increments.

3. Trim Level: The speaker trim level parameters sets the volume of each individual channel.

Channel trim is generally not required since most A/V receivers have the capability to adjust

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oppo BDP-95 in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oppo BDP-95

Oppo BDP-95 User Manual - German - 91 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oppo BDP-95 Manual

Product: