492638
69
Zoom out
Zoom in
Previous page
1/94
Next page
SETUP MENU OPTIONS
64
of audio with high sample rate (up to 192kHz), or 8 channels of audio with standard sample
rate (up to 48kHz). If you play high resolution audio content at the 480p/576p resolution, you
may get reduced audio resolution, incomplete audio channels, or even no audio/video output
at all. Choosing a higher output resolution such as 720p or above allows enough bandwidth
for all high sample rate audio channels.
3. Coaxial/Optical Output: To set the output format for the coaxial/optical digital audio output for
use with Dolby Digital and DTS-compatible receivers. The options are:
x LPCM – Forces down-mixed 2-channel digital audio output. Choose this setting if your
receiver/amplifier only supports stereo digital (PCM) audio.
x Bitstream – Passes audio as compressed bitstream format to the receiver/amplifier.
Choose this if your receiver/amplifier can decode Dolby Digital and/or DTS.
4. LPCM Rate Limit: To set the maximum Linear PCM output frequency for the Coaxial/Optical
digital output. This menu item is intended to ensure that the audio output is compatible with
equipment that cannot support high sample rates. It sets an upper limit to decide whether the
player shall down-sample audio. The player does not up-sample audio to higher sample rates.
The options are:
x 48K – Supported by most equipment.
x 96K – Allows a higher sampling rate and frequency response. It can result in better audio
quality. Ensure that the receiver/amplifier can support it.
x 192K (default) – Allows the highest sampling rate and frequency response. It can result in
the best audio quality. However, please ensure your receiver/amplifier can support it.
NOTE
On the BDP-95, the “LPCM Rate Limit” can also affect the analog audio performance. Setting
to “192K” may help to get the best analog audio quality.
5. SACD Output: To select audio output format for SACD. The options are:
x PCMSACD Direct Stream Digital (DSD) data is converted into multi-channel, high-
resolution PCM data. The converted PCM data is then output through HDMI or the internal
DAC (Digital to Analog Converter) for the analog audio output ports. If you use a receiver
that supports HDMI v1.1 to listen to SACD, please select this option. You may also want to
select this option if you prefer the sound quality of the DSD-to-PCM conversion.
x DSD – SACD DSD data is output over HDMI without any conversion. For the analog audio
outputs, DSD data is converted into analog signal directly by the internal DAC. If you use a
receiver that supports HDMI v1.2a with DSD over HDMI, or you prefer the sound quality of
straight DSD to analog, please select this option.
6. HDCD Decoding: To set the audio decoding option for HDCD (High Definition Compatible
Digital) discs. The options are:
x On – HDCD is decoded by the player. You can enjoy expanded dynamic range and
improved audio resolution.
x Off – HDCD is treated as regular CD. This is useful when the player is connected to an
HDCD-capable A/V receiver via a digital audio output link (Coaxial, Optical, or HDMI) so the
A/V receiver can perform HDCD decoding.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oppo BDP-95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oppo BDP-95 in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oppo BDP-95

Oppo BDP-95 User Manual - German - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info