637405
79
Zoom out
Zoom in
Previous page
1/100
Next page
S E T U P M E NU O PTIONS
75
Other Audio Processing Settings
In addition to Speaker Configuration, Crossover Frequency and Dynamic Range Control are audio
processing settings that can be configured:
1. Crossover: Allows you to set the Bass Management kick-in frequency for all speakers. When the
speaker size is set to Small in Speaker Configuration (see page 73), bass information below this
frequency is not passed to the speakers to reduce possible distortion, and if the subwoofer is
available, bass information will be redirected to the subwoofer. When all speaker sizes are set to
Large, there is
no Bass Management.
40Hz / 50Hz / 60Hz / 70Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 130Hz / 140Hz / 150Hz
/160Hz / 200Hz / 250Hz – These are the available crossover frequencies. You can press the
UP/DOWN ARROW buttons and the ENTER buttons to select it. This option applies to all
speakers (centre, front, surround, and surround back speakers). By default the crossover
frequency is 80Hz.
2. Dynamic Range Control: Allows you to set the Dynamic Range Compression (DRC). DRC can
smooth out the sonic peaks and valleys common with wide-range digital audio. E
nabling DRC may
make low level audio more audible during low-level listening. Turning off DRC restores the sonic
energy present in the original recording.
AutoPlays at the dynamic range specified by the disc. This option applies to certain Blu-
ray Discs only, which have DRC instructions encoded in the Dolby TrueHD audio tracks.
On – Turn on DRC for all Dolby and DTS audio formats. This option applies to all DVD and
Blu-ray Discs.
Off – Turn off DRC.
NOTE
Dynamic Range Control is applied to the analogue audio outputs (stereo and multi-channel), as well
as the digital audio outputs (HDMI, Coaxial and Optical) when the audio format is set to PCM.
3. DTS Neo:6 Mode: Allows you to enable DTS Neo:6 audio processing and select the listening mode.
It is a digital signal processing that can expand the original stereo source to 7.0 (L, R, C, L
S
, R
S
, L
R
,
R
R
) or 7.1 (with Bass Management) surround.
Music – Enables DTS Neo:6 audio processing for stereo music sources.
CinemaEnables DTS Neo:6 audio processing for digital TV box or stereo movie sources.
Off (default) – Turns off the DTS Neo:6 to keep the original audio quality.
5.
Power On Volume: Allows you to set the initial audio volume level after power on. This option will be
applied to the 7.1and Stereo audio outputs.
40 (Custom) – Power on with your preferred volume level. You may use the LEFT/RIGHT
ARROW buttons on the remote to decrease/increase the volume level. The default level is 40.
Last (default) – Power on with the previous volume level before the player was turned off. This
choice is recommended for regular use.
4. Output Volume: Allows you to enable or disable the analogue volume controls (also known as Variable
Audio). The available options are:
VariableEnables the analogue volume control. Use the VOL+/- buttons on the remote to
increase/decrease the analogue audio output level (the maximum is 100).
Fixed – Disables the analogue volume control. The VOL+/- buttons on the remote will no
longer affect the analogue audio output, and the volume level is fixed to 100.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oppo BDP-105D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oppo BDP-105D in the language / languages: English as an attachment in your email.

The manual is 34,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oppo BDP-105D

Oppo BDP-105D User Manual - French - 94 pages

Oppo BDP-105D User Manual - Spanish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info